3-methylpentane

3-methylpentane structural formula

Structural formula

Business number 02AJ
Molecular formula C6H14
Molecular weight 86.18
label

3-methylphenol methyl ester,

Diethylmethylmethane,

(±)-3-methyl-pentene,

3-Methylpentan,

3-Methyl-pentan,

spectrum analysis

Numbering system

CAS number:96-14-0

MDL number:MFCD00009342

EINECS number:202-481-4

RTECS number:SA2995500

BRN number:1730734

PubChem number:24885749

Physical property data

1. Properties: Colorless, transparent and volatile liquid. [1]

2. Melting point (℃): -118[2]

3. Boiling point (℃): 63.3[3]

4. Relative density (water = 1): 0.66[4]

5. Relative vapor Density (air=1): 2.97[5]

6. Saturated vapor pressure (kPa): 20.5 (20℃)[6]

7. Heat of combustion (kJ/mol): -4155.5[7]

8. Critical temperature (℃): 231.2[8]

9. Critical pressure (MPa): 3.12[9]

10. Octanol/water partition coefficient: 3.6 [10]

11. Flash point (℃): <-20[11]

12. Ignition temperature (℃) :278[12]

13. Explosion upper limit (%): 7.0[13]

14. Explosion lower limit (%) %): 1.2[14]

15. Solubility: Insoluble in water, slightly soluble in ether, acetone, benzene, soluble in ethanol. [15]

16. Critical compression factor: 0.274

17. Critical volume (cm3·mol -1): 368

18. Critical density (g·cm-3): 0.234

19. Eccentricity factor: 0.274

20. Lennard-Jones parameter (A): 11.54

21. Lennard-Jones parameter (K): 169.3

22. Solubility parameter (J· cm-3)0.5: 14.674

23. van der Waals area (cm2·mol– 1): 9.630×109

24. van der Waals volume (cm3·mol-1): 68.250

25. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -4189.77

26. Gas phase standard claim Heat (enthalpy) (kJ·mol-1): -172.09

27. Gas phase standard entropy (J·mol-1·K-1): 383.0

28. Gas phase standard free energy of formation (kJ·mol-1): -3.3

29. Gas phase standard hot melt (J·mol-1·K-1): 142.12

30. Liquid phase standard combustion heat (enthalpy) (kJ ·mol-1): -4159.48

31. Liquid phase standard claims heat (enthalpy) (kJ·mol-1): -202.38

32. Liquid phase standard entropy (J·mol-1·K-1): 292.55

33. Liquid phase Standard free energy of formation (kJ·mol-1): -6.83

34. Liquid phase standard hot melt (J·mol-1·K -1):190.99

Toxicological data

1. Acute toxicity No data available

2. Irritation No data available

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradable[16] In the air, when the concentration of hydroxyl radicals is 5.00×105/cm3, the degradation half-life is 2.8d (theoretical).

4. Other harmful effects[17] This substance may be harmful to the environment , special attention should be paid to the pollution of surface water, soil, atmosphere and drinking water.

Molecular structure data

1. Molar refractive index: 29.80

2. Molar volume (cm3/mol): 127.9

3. Isotonic specific volume (90.2K ): 268.2

4. Surface tension (dyne/cm): 19.3

5. Polarizability (10-24cm3): 11.81

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 3.2

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 19.2

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[18] Stability

2. Incompatible substances[19] Strong oxidants, strong acids, strong bases, halogens

3. Polymerization hazard[20] No polymerization

Storage method

Storage Precautions[21] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37℃. Keep container tightly sealed. should be kept away from oxidizer, do not store together. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

None

Purpose

Used in organic synthesis and as solvent. [22]

extended-reading:https://www.newtopchem.com/archives/44579
extended-reading:https://www.bdmaee.net/fascat9201-catalyst-dibutyl-tin-oxide-fascat9201/
extended-reading:https://www.bdmaee.net/catalyst-a300-a300-nt-cat-300/
extended-reading:https://www.morpholine.org/amine-catalyst-dabco-8154-catalyst-dabco-8154/
extended-reading:https://www.cyclohexylamine.net/bx405-catalyst-dabco-bx405-polyurethane-catalyst-dabco-bx405/
extended-reading:https://www.newtopchem.com/archives/44472
extended-reading:https://www.bdmaee.net/dioctyltin-oxide-cas-818-08-6-dibutyloxotin/
extended-reading:https://www.bdmaee.net/wp-content/uploads/2022/08/33.jpg
extended-reading:https://www.bdmaee.net/fentacat-f50-catalyst-cas122695-73-9-solvay/
extended-reading:https://www.newtopchem.com/archives/40368

BDMAEE:Bis (2-Dimethylaminoethyl) Ether

CAS NO:3033-62-3

China supplier

For more information, please contact the following email:

Email:sales@newtopchem.com

Email:service@newtopchem.com

Email:technical@newtopchem.com

BDMAEE Manufacture !