Glutaraldehyde Glutaraldehyde
Structural formula
| Business number | 0337 |
|---|---|
| Molecular formula | C5H8O2 |
| Molecular weight | 100.12 |
| label |
glue aldehyde, 1,5-Glutaraldehyde, glutaraldehyde solution, Rubber aldehyde, 1,5 – glutaraldehyde, Glutaraldehyde solution, preservative |
Numbering system
CAS number:111-30-8
MDL number:MFCD00007025
EINECS number:203-856-5
RTECS number:MA2450000
BRN number:605390
PubChem number:24895235
Physical property data
1. Character: Colorless or light yellow transparent liquid with a pungent special odor.
2. Density (g/mL, 20℃): 1.06
3. Relative vapor density (g/mL, air=1): Undetermined
p>
4. Melting point (ºC): -6, the melting point of pure glutaraldehyde is about -14
5. Boiling point (ºC): 187-189 (decomposition)
6. Boiling point (ºC, normal Pressure): 101
7. Boiling point (ºC, 1.33kPa): 71-72
8. Refractive index (25ºC): 1.4338
9. Flash Point (ºC): Undetermined
10. Specific rotation (º): Undetermined
11. Autoignition point or ignition temperature (ºC): 285
12. Vapor pressure (mmHg, 25ºC): Undetermined
13. Saturated vapor pressure (kPa, 20ºC): 19.95
14. Heat of combustion (KJ/mol): Undetermined
15. Critical temperature (ºC): Undetermined
16. Critical pressure (KPa): Undetermined
17. Oil and water (octanol/ Log value of the distribution coefficient of water): Undetermined
18. Explosion upper limit (%, V/V): Undetermined
19. Explosion lower limit (%, V/V): Undetermined
20. Solubility: Soluble in water, easily soluble in organic solvents such as ethanol and ether. It is active in nature, easy to polymerize and oxidize, and will react with compounds containing active oxygen and nitrogen-containing compounds. Non-flammable, combustible when exposed to open flames and high heat.
Toxicological data
1. Skin irritation: Glutaraldehyde is irritating to the skin and mucous membranes of humans and animals. 5% glutaraldehyde can cause severe irritation symptoms, but 2% glutaraldehyde only stains the skin a shiny brown color.
2. Systemic toxicity: Glutaraldehyde has mild systemic toxicity in humans.
3. Acute toxicity: 2% fortified acidic glutaraldehyde. Mouse vein: LD5026±1.6mg/Kg. Death time is 4 days; rat vein: LD5024±2mg/Kg Death time 0~2 days; oral administration to mice: LD50 298±25mg/Kg Death time.Film hardening agent for picture tubes. This product is used to produce the central stimulant drug Lobelia hydrochloride. Glutaraldehyde is a fast-acting and broad-spectrum chemical sterilant. A low-concentration glutaraldehyde aqueous solution can show activity against many microorganisms at room temperature, and is pathogenic against reproductive bacteria, viruses, and mycobacteria. Molds and bacterial spores have a high sterilizing effect and are very toxic to humans. Some people say that formaldehyde was used at the beginning of this century, and chemical disinfectants such as ethylene oxide were used in the 1930s. Glutaraldehyde is currently the third milestone. In 1973, the World Health Organization (WHO) recommended the third product as a disinfectant for hepatitis B virus. Among known aldehydes, glutaraldehyde is the best protein cross-linking agent. The characteristics of cross-linking are high activity, fast reaction, high binding capacity, stable product, and strong resistance to boiling water, acid, and enzymes. Therefore, Leather tanned with glutaraldehyde has excellent properties such as sweat resistance, heat resistance, and soaping resistance.
2.In oil field chemicals, it can be used as water Biocides for base oil well fracturing fluids, cross-linking agents for cellulose, etc. As a water treatment bactericide, glutaraldehyde can be widely used in the sterilization of circulating water systems. It can effectively control the number of microorganisms in various water systems and effectively peel off biological slime and biofilm. The input amount is generally 50 to 100mg/L. . It has the advantages that quaternary ammonium salt series fungicides cannot match. It does not foam, is easy to use, and has good compatibility with corrosion inhibitors.In actual use, glutaraldehyde is often used Use in combination with other chemicals such as quaternary ammonium salts.
3.Use As a water treatment bactericide, it can be widely used in the sterilization of circulating water systems. It can effectively control the number of microorganisms in various water systems and effectively strip off biological slime and biofilm. . It does not foam, is easy to use, and has good compatibility with corrosion inhibitors. The dosage is generally 50~100mg/L. It can be combined with chromium for tanning leather.
