HDI trimer BASF HI-190
![](https://www.bdmaee.net/wp-content/uploads/2023/11/7-2.png)
HDI trimer BASF HI-190
ABOUT:
Aliphatic polyisocyanate based on isocyanurate-modified hexamethylene diisocyanate (HDI). Exhibits excellent weather and chemical resistance, non-yellowing and physical properties. It is an approximately 90% solids solution in a 1:1 blend of n-butyl acetate and Solvesso 100. Can be diluted with esters, ketones, glycolether acetates or with aromatic hydrocarbons. Used to crosslink most hydroxy-containing resins and hydroxy functional polyesters. Recommended for
the formulation of lightfast and weather-resistant two-pack polyurethane coatings. Suitable for interior & exterior general industrial metal coating, plastic component coating, wood coatings for floor, furniture or millwork, and automotive OEM or refinish applications. It is listed with TSCA, EPCRA 311/312 and EPCRA 313.
Product Type |
Polyurethanes (PU) > PU-Prepolymers > Isocyanates > HDI-based |
Chemical Composition |
Polyisocyanate based on isocyanurate-modified hexamethylenediisocyanate (HDI) |
Physical Form |
Liquid |
Appearance |
Colorless to slightly yellow |
Product Status |
COMMERCIAL |
Applications/ Recommended for |
CoatingsCoatings Markets > Automotive OEM > Soft-feel interiorCoatings Markets > Automotive refinishing > Enamels > Twocomponents systemsCoatings Markets > General Industrial /MaintenanceCoatings Markets > MetalsCoatings Markets > Plastic coatingCoatings Markets > Wood & Furniture Coatings > Furniture/ interiordecoration |
Labels/Agency Rating |
TSCA,EPCRA 311/312,EPCRA 313 |
Properties:
Property |
Value & Unit |
Test Condition |
Test Method |
Isocyanate Content |
19.3 – 20.3 % |
||
Viscosity |
450 – 650 cP |
At 23°C |
|
Color, APHA < 60 |
< 60 |
||
Solid Content |
89 – 91 % |
||
Shear Rate D |
1000 s-1 |
||
Density |
1.13 g/cm3 |
At 20°C |
|
Isocyanate EquivalentWeight |
212 |
||
Melting Point |
-25 °C |
||
Boiling Point |
160 °C |
||
Flash Point |
51.5 °C |
DIN EN ISO 13736 |
|
Lower Explosion Limit |
1.0 % |
By Volume |
|
Upper Explosion Limit |
7.5 % |
By Volume |
|
Auto-ignition Temperature |
430 °C |
DIN 51794 |
|
Vapour Pressure |
< 50 mbar |
||
Viscosity |
450 – 650 mPa-s |
At 23°C |
DIN 53019 |
Solubility |
Element |
Test Condition |
Test Method |
Soluble in |
Esters |
||
Soluble in |
Ketones |
||
Soluble in |
Glycolether Acetates |
||
Soluble in |
Aromatic Hydrocarbons |