BDMAEE

2,2-dimorpholinodiethylether
Published by BDMAEE on | Permalink

Chinese name: 2,2-bismorpholinyl diethyl ether, dimorpholine diethyl ether, bis(2,2-morpholineethyl)ether, etc.
English name: 2,2-dimorpholinodiethylether,bis(2,2-morpholinoethyl)ether
Molecular formula: C12H24N2O3
Relative molecular mass: 244.0
CAS number: 6425-39-4

Physical and chemical properties

2,2-bismorpholinyl diethyl ether is a colorless to pale yellow liquid at room temperature, soluble in water;
Viscosity (25 ° C, mPa.s): 18
Density (25 ° C, g / cm 3): 1.06
Water soluble: soluble in water
Flash point (TCC, °C): 146
Amine value (mmol/g): 7.9-8.1 mmol/g
application
2,2-bismorpholinyl diethyl ether is suitable for use in water curing systems. It is a strong foaming catalyst. It can prolong the storage period of NCO components due to the steric hindrance effect of amino groups. It is suitable for TDI, MDI, IPDI, etc. Catalytic reaction of NCO and water in the system; 2,2-bismorpholinyl diethyl ether is mainly used in one-component rigid polyurethane foam systems, and also in polyether and polyester polyurethane soft foams, semi-rigid foams, The CASE material or the like is added in an amount of 0.3 to 0.55% of the polyether/ester component.

N,N-dimethyl ethanolamine
Published by BDMAEE on | Permalink

Chinese name: N,N-dimethylethanolamine, 2-dimethylaminoethanol
English name: N, N-dimethyl ethanolamine; 2-(Dimethylamine)ethanol
CAS NO: 108-01-0
Molecular formula: C4H11NO
Molecular weight: 89.14

Physical and chemical properties

Dimethylethanolamine is a colorless or light yellow liquid, soluble in water
Relative density (25 ° C): 0.89
Viscosity (25 ° C): 6mPa.s
Hydroxyl value: 638 mg KOH / g
Flash point (PMCC): 41 ° C

application

Dimethylethanolamine is a reactive catalyst in polyurethane foams and is often used as a cocatalyst;
Dimethylethanolamine is commonly used in polyurethane soft foam and polyurethane rigid foam composition formulations to neutralize acidic materials in various combinations to ensure catalyst activity in the composition.

1,8-diazabicycloundec-7-ene
Published by BDMAEE on | Permalink

Chinese name: 1,8-diazacycloundecene, diazabicyclo, DBU
English name: 1,8-Diazabicyclo (5.4.0) undec-7-ene
Molecular formula: C9H16N2
Relative molecular mass: 152.2
CAS number:6674-22-2

Physical and chemical properties

1,8-Diazabicycloundec-7-ene is a colorless to pale yellow transparent oily liquid with relatively low volatility, almost no odor, and alkaline. It is easy to change color when exposed to light, and it is hygroscopic and corrosive.
Relative density: 1.04~1.07
Viscosity (25 ° C): 14mPa.s
Water soluble: soluble in water
Flash point (TCC): >96 °C characteristics and use 1,8-diazabicycloundec-7-ene is used as a catalyst in the polyurethane industry, it is a very active low odor gel catalyst, mainly For applications requiring strong gel catalysis, including formulations containing alicyclic isocyanates or aliphatic isocyanates, because they are less reactive than aromatic isocyanates, they require a strong catalyst;
The activity of 1,8-diazabicycloundec-7-ene catalyst is obviously enhanced with the increase of temperature. For example, the catalytic rate constant of DBU to isocyanate-alcohol and isocyanate-water reaction at 70 ° C is 25 ° C, respectively. 67 times and 35 times of the time, while the catalytic activity of the commonly used bicyclic tertiary amine catalyst triethylenediamine is increased by 5 times and 6 times respectively;
The 1,8-diazabicycloundec-7-ene catalyst can be used in formulations such as a whole skin foam, a microcellular elastomer, and a rigid foam.

Pentamethyldiethylenetriamine
Published by BDMAEE on | Permalink

Pentamethyldiethylenetriamine

English name: N, N, N’, N”, N”-Pentamethyldiethylenetriamine
Molecular formula: C9H23N3
Molecular weight: 173.3

Physical and chemical properties
Pentamethyldiethylenetriamine is a colorless to pale yellow clear liquid that is readily soluble in water.
Purity: 98.0%
Viscosity (25 ° C): 2mPa.s
Relative density (20 ° C): 0.8302-0.8306
Flash point (closed loop): around 72 °C
Flash point (PMCC): 83.3 ° C
Boiling range: 196-201 ° C or 70-80 ° C (1100 Pa)
Steam pressure (21 ° C): 0.29 * 133pa
Freezing point: <-20 °C

System of law
Pentamethyldiethylenetriamine is generally obtained by N-methylation of diethylenetriamine as a raw material, and the methylation method includes a formic acid/formaldehyde method, a formaldehyde hydrogenation method, and the like.

Characteristics and uses
Pentamethyldiethylenetriamine is a highly reactive, strong foaming polyurethane catalyst that can also be used to balance overall foaming and gelling reactions. It is widely used in a variety of polyurethane rigid foams, including polyisocyanuric acid sheet hard foam, can also improve foam fluidity, thus improving product production processes and improving product quality. Pentamethyldiethylenetriamine can also be used alone as a catalyst for polyurethane foam formulations, or with other catalysts such as DNSHA. When used alone as a hard foam catalyst, the amount is in the range of 1.0 to 2.0 parts by mass per 100 parts by mass of the polyol. In addition to its use in hard foam formulations, pentamethyldiethylenetriamine can also be used in the production of polystyrene blister foams and molded foams.

N-Dimethylcyclohexylamine
Published by BDMAEE on | Permalink

Chemical name: N,N-dimethylcyclohexylamine
Abbreviation: DMCHA
English name: N, N-dimethylcyclohexylamine

CAS: 98-94-2
Chemical formula: C8H17N

Physical and chemical properties
N,N-dimethylcyclohexylamine is a colorless to pale yellow transparent liquid at room temperature, soluble in alcohol and ether solvents, and insoluble in water. It is a strong basic tertiary amine compound.
Boiling range: 160-165 ° C
Freezing point: -60 ° C
Viscosity (25 ° C): 2mPa.s
Density (25 ° C): 0.85-0.87g/cm3
Refractive index (20 ° C): 1.4541-1.4550
Flash point (closed cup): 40-41 ° C.
The minimum explosion limit (volume fraction) of steam in air is 3.6% and the maximum is 19.0%.

System of law
There are various synthetic routes for N,N-dimethylcyclohexylamine, and depending on the type of the raw material, there are a cyclohexanone method, an N,N-dimethylcyclohexylamine method, a cyclohexylamine method, and a phenol method.

Special and use
The main use of N,N-dimethylcyclohexylamine is as a catalyst for rigid polyurethane foams. It is a low viscosity, medium active amine catalyst used in refrigerators, sheets, sprays, and in-situ filled polyurethane rigid foams. The catalyst catalyzes both gelation and foaming, provides a relatively balanced catalytic performance for the foaming reaction and gel reaction of the rigid foam, and has a stronger catalyst for the reaction of water and isocyanate (foaming reaction), and The reaction of the polyol plume isocyanate is also moderately catalytic and is a strong initial catalyst for the foaming reaction. In addition to being used for hard foams, it can also be used to mold auxiliary foaming agents such as soft foams and semi-rigid foams. It has stable performance in the composition, great adjustability and long-term storage.

Pentamethyldipropene Triamine
Published by BDMAEE on | Permalink

Alias: N, N, N’, N”, N”-pentamethyldipropene triamine, pentamethyldipropylenetriamine, bis(dimethylaminopropyl)methylamine
English name: Pentamethyldipropylenetriamine
Molecular formula: C11H27N3
Relative molecular mass: 201.4
CAS number: 3855-32-1

Physical and chemical properties

The appearance of pentamethyldipropene triamine is a colorless to pale yellow low viscosity liquid with a fishy smell. Dissolved in water, the aqueous solution is strongly alkaline.
Viscosity (25 ° C, mPa.s): 3
Density (25 ° C, g / cm3): 0.85
Water soluble: soluble in water
Flash point (PMCC, °C): 92
Hydroxyl value (mgKOH/g): 0

Characteristics and uses

Pentamethyldipropylenetriamine is a tertiary amine catalyst that balances the reaction of urethane (polyol-isocyanate) with urea (isocyanate-water) in various soft and rigid polyurethane foams;
Pentamethyldipropene triamine can improve the open porosity of the flexible foam and reduce the brittleness and adhesion of the rigid foam;
Pentamethyldipropene triamine is mainly used in the production of car seats and pillows, rigid polyether block foam.

2,4,6-tris(dimethylaminomethyl)phenol
Published by BDMAEE on | Permalink

Chinese name: 2,4,6-tris(dimethylaminomethyl)phenol
English name: 2,4,6-tris(dimethylaminomethyl)phenol
Relative molecular mass: 265.4
Molecular formula: C15H27N3O
CAS number: 90-72-2

Physical and chemical properties

2,4,6-tris(dimethylaminomethyl)phenol is a pale yellow transparent viscous liquid under normal conditions, soluble in water;
Viscosity (25 ° C, mPa.s): 201
Density (25 ° C, g / cm3): 0.97
Water soluble: soluble in water
Flash point (PMCC, °C): 150
Hydroxyl value (mgKOH/g): 213

application

2,4,6-tris(dimethylaminomethyl)phenol is a tertiary amine reaction delayed trimerization catalyst used in rigid polyisocyanurate foams and can be used in CASE applications; 4,6-tris(dimethylaminomethyl)phenol can also be used as an epoxy curing accelerator, an acid neutralizing agent, and the like.

Dimethylaminoethoxyethanol
Published by BDMAEE on | Permalink

Chinese name: Dimethylaminoethoxyethanol, N,N-dimethylethylamino glycol
English name: dimethyaminoethoxyethanol
Molecular formula: C6H15NO2
Relative molecular weight: 133.2
CAS number: 1704-62-7

Physical and chemical properties

Dimethylaminoethoxyethanol is a colorless or pale yellow liquid at room temperature and is soluble in water;
Viscosity (25 ° C, mPa.s): 4
Density (25 ° C, g / cm3): 0.84
Water soluble: soluble in water
Flash point (PMCC, °C): 88
Hydroxyl value (mgKOH/g): 298 application Dimethylaminoethoxyethanol is a non-spray amine catalyst, mainly used in low density, water-foamed open-cell spray polyurethane foam (SPF); Oxyethanol can be used as a main catalyst alone or as a cocatalyst to reduce the amount of BDMAEE-based foaming catalyst used.

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

Overview:

Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF： C6H15NO2

MW：133.19

CAS： 1704-62-7

1 (9)

Physical and chemical properties:

Form:

liquid

Odour:

mild, amine-like

Colour:

colourless to yellow

pH value:

11.5

( 1.. g/l)

Melting point:

No data available

Boiling point:

235 °C

( 1.13 hPa)

Vapour pressure:

< 1 mbar

( 25 °C)

Density:

0.9549 g/cm3

( 20°C)

Relative density:

0.9549

( 20 °C)

Partitioning coefficient n

-1.21

(calculated)

octanol/water (log Pow):

Viscosity, dynamic:

1. mPa.s

( 25 °C)

Solubility in water:

Molar mass:

133.19 g/mol

Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.

Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.

Package:

190KG/Steel Drum

(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)

Trimethyl hydroxyethyl ethylenediamine
Published by BDMAEE on | Permalink

Trimethyl hydroxyethyl ethylenediamine

Chinese name: N,N-dimethylaminoethyl-N’-methylaminoethanol; N,N,N’-trimethylaminoethylethanolamine; 2-(dimethylaminoethylmethylamino)ethanol
English name: N, N, N’-trimethylaminoethylethanolamine; N, N-dimethylaminoethyl-N’-methylaminoethanol
Molecular formula: C7H18N2O
Relative molecular mass: 146.2
CAS No.: 2232-32-0

Physical and chemical properties

Trimethyl hydroxyethyl ethylenediamine is a colorless to pale yellow liquid, soluble in water;
Viscosity (25 ° C, mPa.s): 7
Density (25 ° C, g / cm3): 0.91
Water soluble: soluble in water
Flash point (PMCC, °C): 89
Hydroxyl value (mgKOH/g): 387

application

Trimethyl hydroxyethyl ethylenediamine is a non-spray amine catalyst for promoting urea (isocyanate-water) reaction, and because it contains an active hydroxyl group, it is easy to react into the polymer matrix;

Trimethyl hydroxyethyl ethylenediamine can be used in soft and rigid polyurethane systems which require smooth reaction characteristics.

N-(dimethylaminopropyl)diisopropanolamine
Published by BDMAEE on | Permalink

Chinese name: N-(dimethylaminopropyl) diisopropanolamine
English name: N-(3-dimethylaminopropyl)-N,N’diisopropanolamine
CAS number: 63469-23-8
Relative molecular weight: 218.3
Molecular formula: C11H26N2O2

Physical and chemical properties

Dimethylaminopropylamine Diisopropanol is a colorless or pale yellow liquid that is soluble in water.
Relative density (25 ° C): 0.95
Viscosity (25 ° C): 145 mPa.s
Hydroxyl value: 514 mg KOH / g
Flash point (PMCC): 90 ° C

application

Dimethylaminopropylamine diisopropanol is a low odor reaction type catalyst with outstanding balance and versatility, providing good fluidity; dimethylaminopropylamine diisopropanol is mainly used for polyether polyurethane soft Foaming, molding foam, hard foam, and the like.

BDMAEE：Bis (2-Dimethylaminoethyl) Ether

CAS NO：3033-62-3

China supplier

For more information, please contact the following email:

Email:sales@newtopchem.com

Email:service@newtopchem.com

Email:technical@newtopchem.com

BDMAEE Manufacture !