BDMAEE – Page 79

Dibutyltin monooctyl maleate

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Dibutyltin monooctyl maleate 25168-21-2

Chinese alias: bis (isooctyl maleic acid) dibutyl tin dibutyl tin bis (isooctyl maleate) monooctyl maleate dibutyl tin dibutyl tin bis (isooctyl maleate)

English alias: 2-Butenedioicacid (2Z)-, 1,1′-(dibutylstannylene) 4,4′-diisooctyl ester4-O-[dibutyl-[(Z)-4-(6-methylheptoxy)-4-oxobut-2 -enoyl]oxystannyl] 1-O-(6-methylheptyl) (Z)-but-2-enedioateDI-n-BUTYLBIS(2-ETHYLHEXYLMALEATE)TIN,

Product designation: BT-58C

English name: Di-n-butyltin Di (Monooctyl Maleate)

CAS number: 25168-21-2

Molecular formula: C32H56O8Sn

Physical and chemical properties:

Accurate molecular weight: 688.30000

Isotope mass: 688.3

Number of isotopes: 0

Number of hydrogen bond donors: 0

Number of hydrogen bond acceptors: 8

Number of heavy atoms: 41

Number of rotatable chemical bonds: 28

Complexity: 738

Experimental features:

Density: 1,145 g/cm3

Melting point: -25°C

Boiling point: 618.1°C at 760 mmHg

Flash point: 123°C

PSA: 105.20000

LogP: 7.74680

Security Information:

Hazard category code: 20/21/22-36/37/38

Safety Instructions: S26; S36/37/39

Risk term: R20/21/22

TSCA: Yes

use:

Yellow oily liquid

This product is a heat stabilizer for PVC products and has excellent long-term stability and weather resistance. Can improve initial coloring and promote gelation

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Dibutyltin monobutyl maleate

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Dibutyltin monobutyl maleate 66010-36-4

Product designation: BT-53C

Category: Pharmaceutical Intermediate Brand: Inquiry Specification: 1/kg

Origin: Inquiry Packaging: Inquiry Capacity: Inquiry

CAS No.: 66010-36-4 Molecular formula: C24H40O8Sn

English name: Di-n-butyltin Di(Monobutyl Maleate)

CAS number: 66010-36-4

Molecular formula: C24H40O8Sn

use:

Light yellow transparent liquid

This product is a heat stabilizer for transparent PVC products. It has excellent thermal stability, weather resistance, transparency and coloration prevention. This product has less tearing property, faster gelation speed, and no sulfide pollution. Mainly used for hard transparent plates, films, thin plates, injection products and hollow molded products

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

CAS 66010-36-4

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Dibutyltin monobutyl maleate 66010-36-4

Product designation: BT-53C

Category: Pharmaceutical Intermediate Brand: Inquiry Specification: 1/kg

Origin: Inquiry Packaging: Inquiry Capacity: Inquiry

CAS No.: 66010-36-4 Molecular formula: C24H40O8Sn

English name: Di-n-butyltin Di(Monobutyl Maleate)

CAS number: 66010-36-4

Molecular formula: C24H40O8Sn

use:

Light yellow transparent liquid

This product is a heat stabilizer for transparent PVC products. It has excellent thermal stability, weather resistance, transparency and coloration prevention. This product has less tearing property, faster gelation speed, and no sulfide pollution. Mainly used for hard transparent plates, films, thin plates, injection products and hollow molded products

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Methyltin maleate

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Methyl tin maleate powder

Product designation: M-Maleate-P

Chinese name Methyl tin maleate

Foreign name Methyltin maleate

Appearance White powder

Tin content (%) 42.0±0.5

Item Index

Bulk density (g/cm) 1.0±0.1

Water content (%) ≤0.5

English name: Methyltin maleate

CAS number: –

Molecular formula: C6H8O4Sn

use:

White powder

Product properties: white amorphous powder. It is composed of maleic anhydride and methyl tin oxide. Slightly soluble in water. The product is applied to PVC heat stabilizer. It has excellent thermal stability and weather resistance, no sulfide pollution, no melting point when heated, and it will not reduce the softening point and impact force of hard products. The product lacks lubricity and has poor processing performance. Mainly used for PVC rigid products, ABS engineering plastics, condensation catalyst. The general dosage is: 0.5%-2%.

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Methyl tin maleate powder

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Methyl tin maleate powder

Product designation: M-Maleate-P

Chinese name Methyl tin maleate

Foreign name Methyltin maleate

Appearance White powder

Tin content (%) 42.0±0.5

Item Index

Bulk density (g/cm) 1.0±0.1

Water content (%) ≤0.5

English name: Methyltin maleate

CAS number: –

Molecular formula: C6H8O4Sn

use:

White powder

Product properties: white amorphous powder. It is composed of maleic anhydride and methyl tin oxide. Slightly soluble in water. The product is applied to PVC heat stabilizer. It has excellent thermal stability and weather resistance, no sulfide pollution, no melting point when heated, and it will not reduce the softening point and impact force of hard products. The product lacks lubricity and has poor processing performance. Mainly used for PVC rigid products, ABS engineering plastics, condensation catalyst. The general dosage is: 0.5%-2%.

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

butyltris((2-ethyl-1-oxohexyl)oxy)-stannan

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Butyl tin triisooctoate 23850-94-4

Chinese name: Monobutyl triisooctanoate

Chinese synonyms: tri(2-ethyl-1-hexanoic acid) butyltin; derivatives of monobutyl oxide; monobutyltin triisooctoate; butyltin tri(isooctoate)

English name: Butyltin tris(2-ethylhexanoate)

English synonyms: Butyltintris(2-ethylhexoate); butyltris((2-ethyl-1-oxohexyl)oxy)-stannan; butyltris((2-ethyl-1-oxohexyl)oxy)stannane; butyltris((2-ethylhexanoyl)oxy) -stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-Stannane;fascat4102;fascat9201

Product designation: TRIS

English name: Butyltin Tris(2-ethylexanoate)

CAS number: 23850-94-4

Molecular formula: C28H54O6Sn

Chinese name Monobutyl triisooctanoate

Foreign name Butyltin tris(2-ethylhexanoate)

CAS number 23850-94-4

Molecular formula C28H54O6Sn

EINECS number: 245-912-1

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F

Physical properties:

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F [1]

Security Information:

Dangerous goods mark: T

Hazard category code: 23/24/25-36/37/38

Safety instructions: 26-28-36/37/39-45

Dangerous goods transport number: UN 2788 6.1/PG 3

WGK Germany: 3

RTECS number: WH6788500

TSCA: Yes

HazardClass: 6.1(b)

PackingGroup: III

use:

Light yellow transparent liquid. Soluble in most organic solvents, insoluble in water

An efficient organotin catalyst for esterification. It is widely used in the synthetic production of saturated resins for powder coatings and coil coatings. Widely used in the production of aromatic polyol products for polyurethane soft foam and hard foam.

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Butyltin tris(2-ethylhexanoate)

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Butyl tin triisooctoate 23850-94-4

Chinese name: Monobutyl triisooctanoate

Chinese synonyms: tri(2-ethyl-1-hexanoic acid) butyltin; derivatives of monobutyl oxide; monobutyltin triisooctoate; butyltin tri(isooctoate)

English name: Butyltin tris(2-ethylhexanoate)

English synonyms: Butyltintris(2-ethylhexoate); butyltris((2-ethyl-1-oxohexyl)oxy)-stannan; butyltris((2-ethyl-1-oxohexyl)oxy)stannane; butyltris((2-ethylhexanoyl)oxy) -stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-Stannane;fascat4102;fascat9201

Product designation: TRIS

English name: Butyltin Tris(2-ethylexanoate)

CAS number: 23850-94-4

Molecular formula: C28H54O6Sn

Chinese name Monobutyl triisooctanoate

Foreign name Butyltin tris(2-ethylhexanoate)

CAS number 23850-94-4

Molecular formula C28H54O6Sn

EINECS number: 245-912-1

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F

Physical properties:

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F [1]

Security Information:

Dangerous goods mark: T

Hazard category code: 23/24/25-36/37/38

Safety instructions: 26-28-36/37/39-45

Dangerous goods transport number: UN 2788 6.1/PG 3

WGK Germany: 3

RTECS number: WH6788500

TSCA: Yes

HazardClass: 6.1(b)

PackingGroup: III

use:

Light yellow transparent liquid. Soluble in most organic solvents, insoluble in water

An efficient organotin catalyst for esterification. It is widely used in the synthetic production of saturated resins for powder coatings and coil coatings. Widely used in the production of aromatic polyol products for polyurethane soft foam and hard foam.

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

CAS 23850-94-4

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Butyl tin triisooctoate 23850-94-4

Chinese name: Monobutyl triisooctanoate

Chinese synonyms: tri(2-ethyl-1-hexanoic acid) butyltin; derivatives of monobutyl oxide; monobutyltin triisooctoate; butyltin tri(isooctoate)

English name: Butyltin tris(2-ethylhexanoate)

English synonyms: Butyltintris(2-ethylhexoate); butyltris((2-ethyl-1-oxohexyl)oxy)-stannan; butyltris((2-ethyl-1-oxohexyl)oxy)stannane; butyltris((2-ethylhexanoyl)oxy) -stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-stannan;butyltris[(2-ethyl-1-oxohexyl)oxy]-Stannane;fascat4102;fascat9201

Product designation: TRIS

English name: Butyltin Tris(2-ethylexanoate)

CAS number: 23850-94-4

Molecular formula: C28H54O6Sn

Chinese name Monobutyl triisooctanoate

Foreign name Butyltin tris(2-ethylhexanoate)

CAS number 23850-94-4

Molecular formula C28H54O6Sn

EINECS number: 245-912-1

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F

Physical properties:

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point: >230 °F [1]

Security Information:

Dangerous goods mark: T

Hazard category code: 23/24/25-36/37/38

Safety instructions: 26-28-36/37/39-45

Dangerous goods transport number: UN 2788 6.1/PG 3

WGK Germany: 3

RTECS number: WH6788500

TSCA: Yes

HazardClass: 6.1(b)

PackingGroup: III

use:

Light yellow transparent liquid. Soluble in most organic solvents, insoluble in water

An efficient organotin catalyst for esterification. It is widely used in the synthetic production of saturated resins for powder coatings and coil coatings. Widely used in the production of aromatic polyol products for polyurethane soft foam and hard foam.

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

dibutyltin benzoate

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Dibutyltin dibenzoate

Product designation: D-Dibenzo

English name: Dibutyltin Dibenzoate Solution

CAS number: –

Molecular formula: C22H28O4Sn

Ethylene glycol butyl ether (111-76-2), methyl isobutyl ketone (108-10-1)

Main application: This product is used as a drying agent for esterification catalyst in polymer paint, ink and paint

Product English name Dibutyltin diacetate

CAS Number: 1067-33-0

Alias: dibutyltin benzoate

Effective substance content 99

Specifications: 200 kg/barrel

Item Index

Tin content (%) 9.8-10.6

Chromaticity (Pt-Co) ≤80#

Specific gravity (20℃) 1.010-1.030

Refractive index (20℃) 1.456-1.466

Solid content (%) 40-42

Na+ (ppm) ＜30

Ethylene glycol butyl ether (%) 47-48

use:

Colorless or light yellow oily liquid

This product is used as a drying agent for esterification catalyst in polymer paint, ink and paint

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Dibutyltin dibenzoate

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Dibutyltin dibenzoate

Product designation: D-Dibenzo

English name: Dibutyltin Dibenzoate Solution

CAS number: –

Molecular formula: C22H28O4Sn

Ethylene glycol butyl ether (111-76-2), methyl isobutyl ketone (108-10-1)

Main application: This product is used as a drying agent for esterification catalyst in polymer paint, ink and paint

Product English name Dibutyltin diacetate

CAS Number: 1067-33-0

Alias: dibutyltin benzoate

Effective substance content 99

Specifications: 200 kg/barrel

Item Index

Tin content (%) 9.8-10.6

Chromaticity (Pt-Co) ≤80#

Specific gravity (20℃) 1.010-1.030

Refractive index (20℃) 1.456-1.466

Solid content (%) 40-42

Na+ (ppm) ＜30

Ethylene glycol butyl ether (%) 47-48

use:

Colorless or light yellow oily liquid

This product is used as a drying agent for esterification catalyst in polymer paint, ink and paint

storage:

It should be kept dry during storage, and the temperature should be above 10℃. The crystals are precipitated below 10℃, which will not affect the use effect after heating and melting.

transport:

Store in an airtight container in a cool, dry place. The storage place must be locked, and the key must be handed over to the technical experts and their assistants. The place of storage must be far away from oxidant and water source.

General-purpose plastic and plastic-sprayed iron drums or glass containers are packaged and transported in accordance with general chemical management regulations.

package:

Packing: It should be packed in glass containers, plastic containers, and metal containers resistant to chlorine corrosion, sealed and stored. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.