BDMAEE – Page 86

CAS 2273-43-0

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Butylstannic acid (monobutyltin oxide) 2273-43-0

Alias: Butyltin acid, monobutyltin oxide, CAS 2273-43-0, monobutyltin oxide, Butyltin oxide

Product code: MBTO

Butyltin acid monobutyltin oxide

Chinese name

English name Monobutyltin oxide

Other names are monobutyltin oxide, butylstannic acid

Chemical formula C4H1OSnO2

Molecular weight 208.8

EINECS registration number 257-300-1

Boiling point 350℃

Water soluble

Density 1.46g/L

Appearance White powder

Basic Information:

English name: Monobutyltin oxide

CAS number: 2273-43-0

Molecular formula: C4H10O2Sn

use:

White powder with special fragrance, insoluble in water and most organic solvents, soluble in strong alkali and mineral acid

Used for the synthesis of saturated polyester for powder coating, coil (steel) material coating, insulating paint, etc.; for the synthesis of unsaturated polyester; for PBT

Synthesis of engineering resins and synthesis of other esterification and transesterification products

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

monobutyltin oxide

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Butylstannic acid (monobutyltin oxide) 2273-43-0

Alias: Butyltin acid, monobutyltin oxide, CAS 2273-43-0, monobutyltin oxide, Butyltin oxide

Product code: MBTO

Butyltin acid monobutyltin oxide

Chinese name

English name Monobutyltin oxide

Other names are monobutyltin oxide, butylstannic acid

Chemical formula C4H1OSnO2

Molecular weight 208.8

EINECS registration number 257-300-1

Boiling point 350℃

Water soluble

Density 1.46g/L

Appearance White powder

Basic Information:

English name: Monobutyltin oxide

CAS number: 2273-43-0

Molecular formula: C4H10O2Sn

use:

White powder with special fragrance, insoluble in water and most organic solvents, soluble in strong alkali and mineral acid

Used for the synthesis of saturated polyester for powder coating, coil (steel) material coating, insulating paint, etc.; for the synthesis of unsaturated polyester; for PBT

Synthesis of engineering resins and synthesis of other esterification and transesterification products

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Butyltin acid

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Product Name: Butylstannic acid (monobutyltin oxide) 2273-43-0

Alias: Butyltin acid, monobutyltin oxide, CAS 2273-43-0, monobutyltin oxide, Butyltin oxide

Product code: MBTO

Butyltin acid monobutyltin oxide

Chinese name

English name Monobutyltin oxide

Other names are monobutyltin oxide, butylstannic acid

Chemical formula C4H1OSnO2

Molecular weight 208.8

EINECS registration number 257-300-1

Boiling point 350℃

Water soluble

Density 1.46g/L

Appearance White powder

Basic Information:

English name: Monobutyltin oxide

CAS number: 2273-43-0

Molecular formula: C4H10O2Sn

use:

White powder with special fragrance, insoluble in water and most organic solvents, soluble in strong alkali and mineral acid

Used for the synthesis of saturated polyester for powder coating, coil (steel) material coating, insulating paint, etc.; for the synthesis of unsaturated polyester; for PBT

Synthesis of engineering resins and synthesis of other esterification and transesterification products

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Polyurethane catalyst PC5

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a high-efficiency catalyst for polyurethane soft foam. It is used in the formulation of soft foam products and can be used as an auxiliary catalyst for hard foam to improve the fluidity of PU foam in large-capacity refrigerators.

Alias: pentamethyldiethylenetriamine, PC-5 hard foam catalyst, PC5 catalyst, PC5

Chinese name N,N,N,N,N-pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS Registry Number 3030-47-5

Alias N,N,N′,N″,N″-pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point −20℃

Boiling point 198℃

Water soluble, soluble in water, ether and alcohol solvents

Appearance Colorless or light yellow transparent liquid

Flash point 53℃

MDL number: MFCD00014876

Refractive index: 1.442(lit.)

pentamethyldiethylenetriamine

Basic Information:

Chemical name: N, N, N′, N′, N″-pentamethyldiethylenetriamine

Alias: pentamethyldiethyltriamine

Abbreviation: PMDETA

English name: N, N, N′, N′, N″-pentamethyldiethylenetriamine.

Molecular formula: C9H23N3

Relative molecular mass 173.3

CAS number 3030-47-5

Physical and chemical properties:

Pentamethyldiethylene triamine is a colorless to pale yellow clear liquid, easily soluble in water, the product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302- 0.8306, flash point (closed cup) about 72℃, flash point (PMCC) 83.3℃, boiling range 196-201℃ or 70-80℃ (1100Pa), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃ . Explosion limit: lower limit 1.1%, upper limit 5.6%. Refractive index 1.4435±0.0005, pH=11.0

Features and uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Because of its strong foaming effect, it can improve the fluidity of the foam, so it improves the production process of the product and increases the production capacity. It is often shared with DMCHA. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations, and can also be used with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in hard foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether polyurethane soft foam and molded foam. For example, 70% of pentamethylene diamine is mainly used in the formulation of soft foam products. The catalyst has large activity, fast foaming speed, and the products have high toughness and high load-bearing capacity. 0.1-0.5 parts of the catalyst per 100 parts of polyether in soft foam can get better results. It can also be used as an auxiliary catalyst for hard foam.

Pentamethyldiethylene triamine quaternary ammonium salt is a soft foam delay catalyst, used to extend the foaming milk white time, suitable for complex shaped foam products and box foaming process, improve the cell structure and improve the molding quality. The range of its own dosage is quite wide, and the change of dosage has no obvious effect on the milking time; but increasing the dosage can shorten the foam rise time and shorten the curing time.

Hazard statement

Danger code: T

Danger level: 22-24-34

Security level: 26-36/37/39-45

UN number: UN2734

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

PC5 catalyst

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a high-efficiency catalyst for polyurethane soft foam. It is used in the formulation of soft foam products and can be used as an auxiliary catalyst for hard foam to improve the fluidity of PU foam in large-capacity refrigerators.

Alias: pentamethyldiethylenetriamine, PC-5 hard foam catalyst, PC5 catalyst, PC5

Chinese name N,N,N,N,N-pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS Registry Number 3030-47-5

Alias N,N,N′,N″,N″-pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point −20℃

Boiling point 198℃

Water soluble, soluble in water, ether and alcohol solvents

Appearance Colorless or light yellow transparent liquid

Flash point 53℃

MDL number: MFCD00014876

Refractive index: 1.442(lit.)

pentamethyldiethylenetriamine

Basic Information:

Chemical name: N, N, N′, N′, N″-pentamethyldiethylenetriamine

Alias: pentamethyldiethyltriamine

Abbreviation: PMDETA

English name: N, N, N′, N′, N″-pentamethyldiethylenetriamine.

Molecular formula: C9H23N3

Relative molecular mass 173.3

CAS number 3030-47-5

Physical and chemical properties:

Pentamethyldiethylene triamine is a colorless to pale yellow clear liquid, easily soluble in water, the product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302- 0.8306, flash point (closed cup) about 72℃, flash point (PMCC) 83.3℃, boiling range 196-201℃ or 70-80℃ (1100Pa), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃ . Explosion limit: lower limit 1.1%, upper limit 5.6%. Refractive index 1.4435±0.0005, pH=11.0

Features and uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Because of its strong foaming effect, it can improve the fluidity of the foam, so it improves the production process of the product and increases the production capacity. It is often shared with DMCHA. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations, and can also be used with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in hard foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether polyurethane soft foam and molded foam. For example, 70% of pentamethylene diamine is mainly used in the formulation of soft foam products. The catalyst has large activity, fast foaming speed, and the products have high toughness and high load-bearing capacity. 0.1-0.5 parts of the catalyst per 100 parts of polyether in soft foam can get better results. It can also be used as an auxiliary catalyst for hard foam.

Pentamethyldiethylene triamine quaternary ammonium salt is a soft foam delay catalyst, used to extend the foaming milk white time, suitable for complex shaped foam products and box foaming process, improve the cell structure and improve the molding quality. The range of its own dosage is quite wide, and the change of dosage has no obvious effect on the milking time; but increasing the dosage can shorten the foam rise time and shorten the curing time.

Hazard statement

Danger code: T

Danger level: 22-24-34

Security level: 26-36/37/39-45

UN number: UN2734

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

PC-5 hard foam catalyst

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a high-efficiency catalyst for polyurethane soft foam. It is used in the formulation of soft foam products and can be used as an auxiliary catalyst for hard foam to improve the fluidity of PU foam in large-capacity refrigerators.

Alias: pentamethyldiethylenetriamine, PC-5 hard foam catalyst, PC5 catalyst, PC5

Chinese name N,N,N,N,N-pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS Registry Number 3030-47-5

Alias N,N,N′,N″,N″-pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point −20℃

Boiling point 198℃

Water soluble, soluble in water, ether and alcohol solvents

Appearance Colorless or light yellow transparent liquid

Flash point 53℃

MDL number: MFCD00014876

Refractive index: 1.442(lit.)

pentamethyldiethylenetriamine

Basic Information:

Chemical name: N, N, N′, N′, N″-pentamethyldiethylenetriamine

Alias: pentamethyldiethyltriamine

Abbreviation: PMDETA

English name: N, N, N′, N′, N″-pentamethyldiethylenetriamine.

Molecular formula: C9H23N3

Relative molecular mass 173.3

CAS number 3030-47-5

Physical and chemical properties:

Pentamethyldiethylene triamine is a colorless to pale yellow clear liquid, easily soluble in water, the product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302- 0.8306, flash point (closed cup) about 72℃, flash point (PMCC) 83.3℃, boiling range 196-201℃ or 70-80℃ (1100Pa), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃ . Explosion limit: lower limit 1.1%, upper limit 5.6%. Refractive index 1.4435±0.0005, pH=11.0

Features and uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Because of its strong foaming effect, it can improve the fluidity of the foam, so it improves the production process of the product and increases the production capacity. It is often shared with DMCHA. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations, and can also be used with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in hard foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether polyurethane soft foam and molded foam. For example, 70% of pentamethylene diamine is mainly used in the formulation of soft foam products. The catalyst has large activity, fast foaming speed, and the products have high toughness and high load-bearing capacity. 0.1-0.5 parts of the catalyst per 100 parts of polyether in soft foam can get better results. It can also be used as an auxiliary catalyst for hard foam.

Pentamethyldiethylene triamine quaternary ammonium salt is a soft foam delay catalyst, used to extend the foaming milk white time, suitable for complex shaped foam products and box foaming process, improve the cell structure and improve the molding quality. The range of its own dosage is quite wide, and the change of dosage has no obvious effect on the milking time; but increasing the dosage can shorten the foam rise time and shorten the curing time.

Hazard statement

Danger code: T

Danger level: 22-24-34

Security level: 26-36/37/39-45

UN number: UN2734

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

pentamethyldiethylenetriamine

Published by BDMAEE on 2020-06-28 | Permalink

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a high-efficiency catalyst for polyurethane soft foam. It is used in the formulation of soft foam products and can be used as an auxiliary catalyst for hard foam to improve the fluidity of PU foam in large-capacity refrigerators.

Alias: pentamethyldiethylenetriamine, PC-5 hard foam catalyst, PC5 catalyst, PC5

Chinese name N,N,N,N,N-pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS Registry Number 3030-47-5

Alias N,N,N′,N″,N″-pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point −20℃

Boiling point 198℃

Water soluble, soluble in water, ether and alcohol solvents

Appearance Colorless or light yellow transparent liquid

Flash point 53℃

MDL number: MFCD00014876

Refractive index: 1.442(lit.)

pentamethyldiethylenetriamine

Basic Information:

Chemical name: N, N, N′, N′, N″-pentamethyldiethylenetriamine

Alias: pentamethyldiethyltriamine

Abbreviation: PMDETA

English name: N, N, N′, N′, N″-pentamethyldiethylenetriamine.

Molecular formula: C9H23N3

Relative molecular mass 173.3

CAS number 3030-47-5

Physical and chemical properties:

Pentamethyldiethylene triamine is a colorless to pale yellow clear liquid, easily soluble in water, the product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302- 0.8306, flash point (closed cup) about 72℃, flash point (PMCC) 83.3℃, boiling range 196-201℃ or 70-80℃ (1100Pa), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃ . Explosion limit: lower limit 1.1%, upper limit 5.6%. Refractive index 1.4435±0.0005, pH=11.0

Features and uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction. It mainly catalyzes the foaming reaction and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Because of its strong foaming effect, it can improve the fluidity of the foam, so it improves the production process of the product and increases the production capacity. It is often shared with DMCHA. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations, and can also be used with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in hard foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether polyurethane soft foam and molded foam. For example, 70% of pentamethylene diamine is mainly used in the formulation of soft foam products. The catalyst has large activity, fast foaming speed, and the products have high toughness and high load-bearing capacity. 0.1-0.5 parts of the catalyst per 100 parts of polyether in soft foam can get better results. It can also be used as an auxiliary catalyst for hard foam.

Pentamethyldiethylene triamine quaternary ammonium salt is a soft foam delay catalyst, used to extend the foaming milk white time, suitable for complex shaped foam products and box foaming process, improve the cell structure and improve the molding quality. The range of its own dosage is quite wide, and the change of dosage has no obvious effect on the milking time; but increasing the dosage can shorten the foam rise time and shorten the curing time.

Hazard statement

Danger code: T

Danger level: 22-24-34

Security level: 26-36/37/39-45

UN number: UN2734

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

C6H11NO2

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

4-Acetylmorpholine is an organic compound with the molecular formula C6H11NO2.

Chinese name: 4-acetyl morpholine

English name: 4-Acetylmorpholine

Chemical formula: C6H11NO2

Molecular weight: 129

CAS login number: 1696-20-4

EINECS login number: 216-913-4

Chinese name 4-acetylmorpholine

Chinese alias: N-acetylmorpholine; 4-acetylmorpholine

English name 4-Acetylmorpholine

Chemical formula C6H11NO2

Molecular weight 129

CAS Registry Number 1696-20-4

EINECS registration number 216-913-4

MDL number: MFCD00006171

RTECS number: QD7000000

4-acetyl morpholine CAS 1696-20-4

Basic Information:

N-acetylmorpholine cas 1696-20-4

Chinese name: N-acetylmorpholine

English name: 4-Acetylmorpholine

Fractional formula: C6H11NO2

Molecular weight: 129.16

C A S: 1696-20-4

Product Specifications:

Appearance: colorless transparent liquid, no visible impurities

Content %: ≥99.0%

Moisture%: ≤0.2%

Security Information:

Customs code: 2934999090

WGK Germany: 1

Hazard category code: R36

Safety instructions: S26-S36-S39

RTECS number: QD7000000

Dangerous goods mark: Xi

nature:

This product is a colorless transparent liquid, non-toxic and non-corrosive. The melting point is 10℃, the boiling point is 246℃ (0.101MPa), the specific gravity (20℃) is 1.116, and the refractive index is 1.4380. It is miscible with water and lower alcohols, and easily soluble in common organic solvents. N-acetylmorpholine is chemically stable under normal conditions, with a thermal decomposition temperature greater than 230°C. Under the action of heat and strong acid, an acid hydrolysis reaction can occur, generating morpholine salt and acetic acid.

use:

N-acetylmorpholine is a very important pesticide intermediate and one of the main raw materials for the synthesis of agricultural fungicides enoylmorpholine and flumorpholine. The mixture of N-acetylmorpholine and N-formylmorpholine is an excellent acid gas removal agent for natural gas and syngas. It is used in the new Morphysorb process developed abroad in recent years. The extraction of low-quality natural gas or syngas requires the removal of trace components such as CO2 and H2S, and it is particularly advantageous to use physical solvents for gases with a high content of CO2 and H2S.

[Package]: 200KG plastic drum.

[Storage]: Store in a cool, ventilated place, away from fire and heat sources. Keep container tightly closed. It is forbidden to use mechanical equipment and tools that easily generate sparks. Handle lightly when handling to prevent damage to packaging and containers.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

CAS 1696-20-4

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

4-Acetylmorpholine is an organic compound with the molecular formula C6H11NO2.

Chinese name: 4-acetyl morpholine

English name: 4-Acetylmorpholine

Chemical formula: C6H11NO2

Molecular weight: 129

CAS login number: 1696-20-4

EINECS login number: 216-913-4

Chinese name 4-acetylmorpholine

Chinese alias: N-acetylmorpholine; 4-acetylmorpholine

English name 4-Acetylmorpholine

Chemical formula C6H11NO2

Molecular weight 129

CAS Registry Number 1696-20-4

EINECS registration number 216-913-4

MDL number: MFCD00006171

RTECS number: QD7000000

4-acetyl morpholine CAS 1696-20-4

Basic Information:

N-acetylmorpholine cas 1696-20-4

Chinese name: N-acetylmorpholine

English name: 4-Acetylmorpholine

Fractional formula: C6H11NO2

Molecular weight: 129.16

C A S: 1696-20-4

Product Specifications:

Appearance: colorless transparent liquid, no visible impurities

Content %: ≥99.0%

Moisture%: ≤0.2%

Security Information:

Customs code: 2934999090

WGK Germany: 1

Hazard category code: R36

Safety instructions: S26-S36-S39

RTECS number: QD7000000

Dangerous goods mark: Xi

nature:

This product is a colorless transparent liquid, non-toxic and non-corrosive. The melting point is 10℃, the boiling point is 246℃ (0.101MPa), the specific gravity (20℃) is 1.116, and the refractive index is 1.4380. It is miscible with water and lower alcohols, and easily soluble in common organic solvents. N-acetylmorpholine is chemically stable under normal conditions, with a thermal decomposition temperature greater than 230°C. Under the action of heat and strong acid, an acid hydrolysis reaction can occur, generating morpholine salt and acetic acid.

use:

N-acetylmorpholine is a very important pesticide intermediate and one of the main raw materials for the synthesis of agricultural fungicides enoylmorpholine and flumorpholine. The mixture of N-acetylmorpholine and N-formylmorpholine is an excellent acid gas removal agent for natural gas and syngas. It is used in the new Morphysorb process developed abroad in recent years. The extraction of low-quality natural gas or syngas requires the removal of trace components such as CO2 and H2S, and it is particularly advantageous to use physical solvents for gases with a high content of CO2 and H2S.

[Package]: 200KG plastic drum.

[Storage]: Store in a cool, ventilated place, away from fire and heat sources. Keep container tightly closed. It is forbidden to use mechanical equipment and tools that easily generate sparks. Handle lightly when handling to prevent damage to packaging and containers.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

4-acetyl morpholine

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

4-Acetylmorpholine is an organic compound with the molecular formula C6H11NO2.

Chinese name: 4-acetyl morpholine

English name: 4-Acetylmorpholine

Chemical formula: C6H11NO2

Molecular weight: 129

CAS login number: 1696-20-4

EINECS login number: 216-913-4

Chinese name 4-acetylmorpholine

Chinese alias: N-acetylmorpholine; 4-acetylmorpholine

English name 4-Acetylmorpholine

Chemical formula C6H11NO2

Molecular weight 129

CAS Registry Number 1696-20-4

EINECS registration number 216-913-4

MDL number: MFCD00006171

RTECS number: QD7000000

4-acetyl morpholine CAS 1696-20-4

Basic Information:

N-acetylmorpholine cas 1696-20-4

Chinese name: N-acetylmorpholine

English name: 4-Acetylmorpholine

Fractional formula: C6H11NO2

Molecular weight: 129.16

C A S: 1696-20-4

Product Specifications:

Appearance: colorless transparent liquid, no visible impurities

Content %: ≥99.0%

Moisture%: ≤0.2%

Security Information:

Customs code: 2934999090

WGK Germany: 1

Hazard category code: R36

Safety instructions: S26-S36-S39

RTECS number: QD7000000

Dangerous goods mark: Xi

nature:

This product is a colorless transparent liquid, non-toxic and non-corrosive. The melting point is 10℃, the boiling point is 246℃ (0.101MPa), the specific gravity (20℃) is 1.116, and the refractive index is 1.4380. It is miscible with water and lower alcohols, and easily soluble in common organic solvents. N-acetylmorpholine is chemically stable under normal conditions, with a thermal decomposition temperature greater than 230°C. Under the action of heat and strong acid, an acid hydrolysis reaction can occur, generating morpholine salt and acetic acid.

use:

N-acetylmorpholine is a very important pesticide intermediate and one of the main raw materials for the synthesis of agricultural fungicides enoylmorpholine and flumorpholine. The mixture of N-acetylmorpholine and N-formylmorpholine is an excellent acid gas removal agent for natural gas and syngas. It is used in the new Morphysorb process developed abroad in recent years. The extraction of low-quality natural gas or syngas requires the removal of trace components such as CO2 and H2S, and it is particularly advantageous to use physical solvents for gases with a high content of CO2 and H2S.

[Package]: 200KG plastic drum.

[Storage]: Store in a cool, ventilated place, away from fire and heat sources. Keep container tightly closed. It is forbidden to use mechanical equipment and tools that easily generate sparks. Handle lightly when handling to prevent damage to packaging and containers.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.