BDMAEE

delayed catalyst SMP
Published by BDMAEE on | Permalink

Overview:

Name: Polyurethane Catalyst SMP

Alias: polyurethane catalyst SMP, catalyst SMP, amine catalyst SMP, delayed catalyst SMP, hard foam catalyst SMP, sponge catalyst SMP, sponge foaming catalyst SMP, low density sponge catalyst SMP

 

The catalyst SMP is a low-density sponge or a special delay catalyst for molding, which can increase the foam hardness, and is particularly suitable for sponges with a density in the range of 6-25kg/kg, while increasing the foam hardness by 5-10%;

Because SMP can increase the hardness of the sponge, if you want to maintain the same hardness, you can reduce the isocyanate index by about 2 to 3 points, which is very cost-effective from an economic perspective;

Whether it is in the MC formula or in the formula with fillers (CaCO3 and melamine), SMP can improve the processability of the foam and reduce cracking;

 

use:

SMP is widely used in flexible slabstock foam and heat-curing molding. The recommended dosage is 0.15-0.2 pphp.

Catalyst SMP Amine catalyst SMP Delayed catalyst SMP Hard foam catalyst SMP Low density sponge catalyst SMP Sponge catalyst SMP

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

amine catalyst SMP
Published by BDMAEE on | Permalink

Overview:

Name: Polyurethane Catalyst SMP

Alias: polyurethane catalyst SMP, catalyst SMP, amine catalyst SMP, delayed catalyst SMP, hard foam catalyst SMP, sponge catalyst SMP, sponge foaming catalyst SMP, low density sponge catalyst SMP

 

The catalyst SMP is a low-density sponge or a special delay catalyst for molding, which can increase the foam hardness, and is particularly suitable for sponges with a density in the range of 6-25kg/kg, while increasing the foam hardness by 5-10%;

Because SMP can increase the hardness of the sponge, if you want to maintain the same hardness, you can reduce the isocyanate index by about 2 to 3 points, which is very cost-effective from an economic perspective;

Whether it is in the MC formula or in the formula with fillers (CaCO3 and melamine), SMP can improve the processability of the foam and reduce cracking;

 

use:

SMP is widely used in flexible slabstock foam and heat-curing molding. The recommended dosage is 0.15-0.2 pphp.

Catalyst SMP Amine catalyst SMP Delayed catalyst SMP Hard foam catalyst SMP Low density sponge catalyst SMP Sponge catalyst SMP

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

catalyst SMP
Published by BDMAEE on | Permalink

Overview:

Name: Polyurethane Catalyst SMP

Alias: polyurethane catalyst SMP, catalyst SMP, amine catalyst SMP, delayed catalyst SMP, hard foam catalyst SMP, sponge catalyst SMP, sponge foaming catalyst SMP, low density sponge catalyst SMP

 

The catalyst SMP is a low-density sponge or a special delay catalyst for molding, which can increase the foam hardness, and is particularly suitable for sponges with a density in the range of 6-25kg/kg, while increasing the foam hardness by 5-10%;

Because SMP can increase the hardness of the sponge, if you want to maintain the same hardness, you can reduce the isocyanate index by about 2 to 3 points, which is very cost-effective from an economic perspective;

Whether it is in the MC formula or in the formula with fillers (CaCO3 and melamine), SMP can improve the processability of the foam and reduce cracking;

 

use:

SMP is widely used in flexible slabstock foam and heat-curing molding. The recommended dosage is 0.15-0.2 pphp.

Catalyst SMP Amine catalyst SMP Delayed catalyst SMP Hard foam catalyst SMP Low density sponge catalyst SMP Sponge catalyst SMP

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

polyurethane catalyst SMP
Published by BDMAEE on | Permalink

Overview:

Name: Polyurethane Catalyst SMP

Alias: polyurethane catalyst SMP, catalyst SMP, amine catalyst SMP, delayed catalyst SMP, hard foam catalyst SMP, sponge catalyst SMP, sponge foaming catalyst SMP, low density sponge catalyst SMP

 

The catalyst SMP is a low-density sponge or a special delay catalyst for molding, which can increase the foam hardness, and is particularly suitable for sponges with a density in the range of 6-25kg/kg, while increasing the foam hardness by 5-10%;

Because SMP can increase the hardness of the sponge, if you want to maintain the same hardness, you can reduce the isocyanate index by about 2 to 3 points, which is very cost-effective from an economic perspective;

Whether it is in the MC formula or in the formula with fillers (CaCO3 and melamine), SMP can improve the processability of the foam and reduce cracking;

 

use:

SMP is widely used in flexible slabstock foam and heat-curing molding. The recommended dosage is 0.15-0.2 pphp.

Catalyst SMP Amine catalyst SMP Delayed catalyst SMP Hard foam catalyst SMP Low density sponge catalyst SMP Sponge catalyst SMP

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Polyurethane catalyst 9727
Published by BDMAEE on | Permalink

Catalyst 9727

9727 is a colorless transparent to light yellow liquid. It is directly added without preparation and its catalytic dosage is equivalent to solid amine. Since it is all composed of amines, there is no change or difference in concentration.

In this way, precise control of the amount of amine can be achieved during production, and the stability of the production process can be improved.

The five tertiary amines in 9727, due to their different catalytic activities and performances, are used in the foaming process of sponges after scientific combination. Compared with triethylenediamine, they have a balanced reaction and flat reaction

Stable and other advantages. Thereby reducing the density gradient of the sponge, improving the quality of the cross-linking, reducing the amount of accumulation, and improving the performance of all aspects of the sponge.

9727 has a surface active effect, which acts as an emulsifying and dispersing effect when the materials are mixed, so that the components, especially moisture, are distributed more evenly, so that the pore size becomes more uniform. At the same time, the heat is able to

Disperse to avoid excessive concentration, thus having a significant anti-burn core function. The manufacturer can adjust the ratio of water and dichloromethane according to the situation, appropriately adjust the amount of dichloromethane, adjust the cell structure of the sponge,

Whole sponge hardness.

Use 9727 instead of triethylenediamine. During the reaction, the ascent process becomes gentle and stable. In addition, there is a post-reactive catalyst component in 9727, which accelerates the post-aging of the sponge and forms

fast. The pass rate of the sponge is therefore greatly improved, reducing the cutting part of the sponge, which reduces the production cost of the sponge to a certain extent.

The operating width of 9727 for stannous octoate is very large, generally compared with triethylenediamine, the operating width of tin can be increased by +0.03. At the same time using 9727 can increase the adjustment range of TDI index.

This may reduce the amount of TDI properly through formula adjustments and effectively reduce costs. With 9727, it can also alleviate the damage to the sponge structure caused by the addition of stone powder

9727 is a low-atomization catalyst with low odor of sponge, which is an environmentally friendly product.

9727 can be used for all flexible foams, the dosage is 1/3 of A-33. A

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Catalyst 9727
Published by BDMAEE on | Permalink

Catalyst 9727

9727 is a colorless transparent to light yellow liquid. It is directly added without preparation and its catalytic dosage is equivalent to solid amine. Since it is all composed of amines, there is no change or difference in concentration.

In this way, precise control of the amount of amine can be achieved during production, and the stability of the production process can be improved.

The five tertiary amines in 9727, due to their different catalytic activities and performances, are used in the foaming process of sponges after scientific combination. Compared with triethylenediamine, they have a balanced reaction and flat reaction

Stable and other advantages. Thereby reducing the density gradient of the sponge, improving the quality of the cross-linking, reducing the amount of accumulation, and improving the performance of all aspects of the sponge.

9727 has a surface active effect, which acts as an emulsifying and dispersing effect when the materials are mixed, so that the components, especially moisture, are distributed more evenly, so that the pore size becomes more uniform. At the same time, the heat is able to

Disperse to avoid excessive concentration, thus having a significant anti-burn core function. The manufacturer can adjust the ratio of water and dichloromethane according to the situation, appropriately adjust the amount of dichloromethane, adjust the cell structure of the sponge,

Whole sponge hardness.

Use 9727 instead of triethylenediamine. During the reaction, the ascent process becomes gentle and stable. In addition, there is a post-reactive catalyst component in 9727, which accelerates the post-aging of the sponge and forms

fast. The pass rate of the sponge is therefore greatly improved, reducing the cutting part of the sponge, which reduces the production cost of the sponge to a certain extent.

The operating width of 9727 for stannous octoate is very large, generally compared with triethylenediamine, the operating width of tin can be increased by +0.03. At the same time using 9727 can increase the adjustment range of TDI index.

This may reduce the amount of TDI properly through formula adjustments and effectively reduce costs. With 9727, it can also alleviate the damage to the sponge structure caused by the addition of stone powder

9727 is a low-atomization catalyst with low odor of sponge, which is an environmentally friendly product.

9727 can be used for all flexible foams, the dosage is 1/3 of A-33. A

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

CAS 251-964-6
Published by BDMAEE on | Permalink

Overview

Chinese name: bismuth neodecanoate

Chinese alias: bismuth neodecanoate; bismuth neodecanoate (Ⅲ), bismuth neodecanoate, CAS 251-964-6

CAS No:34364-26-6

EINECS number: 251-964-6

Molecular formula: C30H57BiO6

Boiling point: 256.2 °C at 760 mmHg

Flash point: 114.1 °C

Density: 1.15

Water solubility: insoluble in water

Appearance light yellow liquid

Function and use

Safety instructions: S23; S24/25 bismuth neodecanoate is used as a catalyst in the polyurethane industry, showing high catalytic activity, widely used in spraying, high-density elastomers, and microporous elastomer systems.

Has the following characteristics:

Bismuth neodecanoate is a powerful gel catalyst, which promotes the completion of the reaction later

It shows the delayed system viscosity when the level of intermolecular reaction is low at the beginning of the reaction;

Environmentally friendly products that can replace catalysts containing lead and tin;

In ordinary polyurethane reaction systems, microporous elastomer systems and high-density semi-rigid foam systems enhance the stability of system reactions.

Bismuth neodecanoate 251-964-6

1 (4)

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

PU catalyst： MB20 CAS#: 34364-26-6

Overview:

Common Name: BISMUTH NEODECANOATE

Other Chemical Names: Neodecanoicacid,bismuth(3+)salt;neodecanoicacid,bismuth(3++)salt;BISMUTHNEODECANOATE;BISMUTH(III)NEODECANOATE;bismuth(3+)neodecanoate;BISMUChemicalbookTHNEODECANOATE,TECH;Bismuth(III)neodecanoate,superconductorgrade~60%inneodecanoicacid(15-20%Bi);Bismuth(III)neodecanoate,superconductorgrade

  1. a) Appearance and Properties: Liquid

Color: light yellow transparent

  1. b) Boiling point, initial boiling point and boiling range 180 °C

  2. c) Flash point 158 °C – closed cup

  3. d) Evaporation rate No data available

  4. e) Flammability (solid, gas) no data available

  5. f) high/low flammability or explosiveness limits no data available

  6. g) Vapor pressure 0.60mmHg at 21 °C

  7. h) Vapour density No data available

  8. i) Density/relative density 1.22 g/cm3 at 25 °C

  9. j) water soluble insoluble

k)n-octanol/water partition coefficient no data available

  1. l) Autoignition temperature no data available

  2. m) Decomposition temperature no data available

  3. n) Viscosity 50mPa.s at 25 °C

Features and uses:

MB20 is used as a catalyst in the polyurethane industry, showing high catalytic activity, and is widely applicable to spray, high density elastomer, and microcellular elastomer systems. Has the following characteristics:

A powerful gel catalyst to promote the completion of the reaction in the later stage;

It shows that the viscosity of the system is delayed when the level of intermolecular reaction is low in the early stage of the reaction;

Environmentally friendly products that can replace lead and tin-containing catalysts;

In the common polyurethane reaction system, the microcellular elastomer system and the high-density semi-rigid foam system enhance the stability of the system reaction.

Acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting excellent back-end cure. It   is free of mercury, lead and dibutyl tin. Possesses low volatility with little or no odor. It has compatibility with common rigid and flexible foam polyols.

It is an alternative to tin-based catalysts in flexible slabstock, high-density flexible foams, spray, microcellular, and rigid foam systems.

Storage Information

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

Package:

25kg/Plastic Drum, 200KG/Steel Drum, 1000kg/IBC Drum

bismuth neodecanoate
Published by BDMAEE on | Permalink

Overview

Chinese name: bismuth neodecanoate

Chinese alias: bismuth neodecanoate; bismuth neodecanoate (Ⅲ), bismuth neodecanoate, CAS 251-964-6

CAS No:34364-26-6

EINECS number: 251-964-6

Molecular formula: C30H57BiO6

Boiling point: 256.2 °C at 760 mmHg

Flash point: 114.1 °C

Density: 1.15

Water solubility: insoluble in water

Appearance light yellow liquid

Function and use

Safety instructions: S23; S24/25 bismuth neodecanoate is used as a catalyst in the polyurethane industry, showing high catalytic activity, widely used in spraying, high-density elastomers, and microporous elastomer systems.

Has the following characteristics:

Bismuth neodecanoate is a powerful gel catalyst, which promotes the completion of the reaction later

It shows the delayed system viscosity when the level of intermolecular reaction is low at the beginning of the reaction;

Environmentally friendly products that can replace catalysts containing lead and tin;

In ordinary polyurethane reaction systems, microporous elastomer systems and high-density semi-rigid foam systems enhance the stability of system reactions.

Bismuth neodecanoate 251-964-6

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

1 (2)

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

PU catalyst： MB20 CAS#: 34364-26-6

Overview:

Common Name: BISMUTH NEODECANOATE

Other Chemical Names: Neodecanoicacid,bismuth(3+)salt;neodecanoicacid,bismuth(3++)salt;BISMUTHNEODECANOATE;BISMUTH(III)NEODECANOATE;bismuth(3+)neodecanoate;BISMUChemicalbookTHNEODECANOATE,TECH;Bismuth(III)neodecanoate,superconductorgrade~60%inneodecanoicacid(15-20%Bi);Bismuth(III)neodecanoate,superconductorgrade

  1. a) Appearance and Properties: Liquid

Color: light yellow transparent

  1. b) Boiling point, initial boiling point and boiling range 180 °C

  2. c) Flash point 158 °C – closed cup

  3. d) Evaporation rate No data available

  4. e) Flammability (solid, gas) no data available

  5. f) high/low flammability or explosiveness limits no data available

  6. g) Vapor pressure 0.60mmHg at 21 °C

  7. h) Vapour density No data available

  8. i) Density/relative density 1.22 g/cm3 at 25 °C

  9. j) water soluble insoluble

k)n-octanol/water partition coefficient no data available

  1. l) Autoignition temperature no data available

  2. m) Decomposition temperature no data available

  3. n) Viscosity 50mPa.s at 25 °C

Features and uses:

MB20 is used as a catalyst in the polyurethane industry, showing high catalytic activity, and is widely applicable to spray, high density elastomer, and microcellular elastomer systems. Has the following characteristics:

A powerful gel catalyst to promote the completion of the reaction in the later stage;

It shows that the viscosity of the system is delayed when the level of intermolecular reaction is low in the early stage of the reaction;

Environmentally friendly products that can replace lead and tin-containing catalysts;

In the common polyurethane reaction system, the microcellular elastomer system and the high-density semi-rigid foam system enhance the stability of the system reaction.

Acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting excellent back-end cure. It   is free of mercury, lead and dibutyl tin. Possesses low volatility with little or no odor. It has compatibility with common rigid and flexible foam polyols.

It is an alternative to tin-based catalysts in flexible slabstock, high-density flexible foams, spray, microcellular, and rigid foam systems.

Storage Information

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

Package:

25kg/Plastic Drum, 200KG/Steel Drum, 1000kg/IBC Drum

Ethylhexanoic acid zinc salt
Published by BDMAEE on | Permalink

Overview:

Zinc isooctanoate is a chemical raw material, soluble in general organic solvents, and is widely used in coatings, synthetic resins, adhesives and other industries.

Chinese name Zinc 2-ethyloctanoate

Foreign name Zinc Octoate

Molecular weight 351.80

Appearance light yellow transparent liquid or water white transparent liquid

Solution stability, transparent and no precipitate

CAS 136-53-8

Flash point 40℃

Density 1.17g/cm3

Alias ​​Zinc Isooctanoate

Zinc isooctanoate 136-53-8

 

Product properties:

Relative density: 1.12 (25℃)

Viscosity: 350mPa.s (25℃)

Flash point (PMCC): >131°C

 

Product Usage:

Zinc isooctanoate can be used as a polyurethane catalyst. The main features are slower gel and better crosslinking catalyst, which can reduce the acidity of the system, accelerate the crosslinking after the reaction and promote environmental protection. Therefore, it can be used to replace metal tin, lead, mercury, etc. Non-environmental protection catalysts;

Zinc isooctanoate is mainly used in polyurethane coatings, adhesives, elastomers, resins and other industries;

Recommended addition amount: 0.1%-1%PPHP.

Zinc isooctanoate 136-53-8

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

Zinc Octoate
Published by BDMAEE on | Permalink

Overview:

Zinc isooctanoate is a chemical raw material, soluble in general organic solvents, and is widely used in coatings, synthetic resins, adhesives and other industries.

Chinese name Zinc 2-ethyloctanoate

Foreign name Zinc Octoate

Molecular weight 351.80

Appearance light yellow transparent liquid or water white transparent liquid

Solution stability, transparent and no precipitate

CAS 136-53-8

Flash point 40℃

Density 1.17g/cm3

Alias ​​Zinc Isooctanoate

Zinc isooctanoate 136-53-8

 

Product properties:

Relative density: 1.12 (25℃)

Viscosity: 350mPa.s (25℃)

Flash point (PMCC): >131°C

 

Product Usage:

Zinc isooctanoate can be used as a polyurethane catalyst. The main features are slower gel and better crosslinking catalyst, which can reduce the acidity of the system, accelerate the crosslinking after the reaction and promote environmental protection. Therefore, it can be used to replace metal tin, lead, mercury, etc. Non-environmental protection catalysts;

Zinc isooctanoate is mainly used in polyurethane coatings, adhesives, elastomers, resins and other industries;

Recommended addition amount: 0.1%-1%PPHP.

Zinc isooctanoate 136-53-8

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

BDMAEE：Bis (2-Dimethylaminoethyl) Ether

CAS NO：3033-62-3

China supplier

For more information, please contact the following email:

Email:sales@newtopchem.com

Email:service@newtopchem.com

Email:technical@newtopchem.com

BDMAEE Manufacture !