BDMAEE – Page 89

CAS 136-53-8

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Zinc isooctanoate is a chemical raw material, soluble in general organic solvents, and is widely used in coatings, synthetic resins, adhesives and other industries.

Chinese name Zinc 2-ethyloctanoate

Foreign name Zinc Octoate

Molecular weight 351.80

Appearance light yellow transparent liquid or water white transparent liquid

Solution stability, transparent and no precipitate

CAS 136-53-8

Flash point 40℃

Density 1.17g/cm3

Alias Zinc Isooctanoate

Zinc isooctanoate 136-53-8

Product properties:

Relative density: 1.12 (25℃)

Viscosity: 350mPa.s (25℃)

Flash point (PMCC): >131°C

Product Usage:

Zinc isooctanoate can be used as a polyurethane catalyst. The main features are slower gel and better crosslinking catalyst, which can reduce the acidity of the system, accelerate the crosslinking after the reaction and promote environmental protection. Therefore, it can be used to replace metal tin, lead, mercury, etc. Non-environmental protection catalysts;

Zinc isooctanoate is mainly used in polyurethane coatings, adhesives, elastomers, resins and other industries;

Recommended addition amount: 0.1%-1%PPHP.

Zinc isooctanoate 136-53-8

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

High Quality CAS 136-53-8 / Zinc Octoate / Ethylhexanoic acid zinc salt

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Zinc isooctanoate is a chemical raw material, soluble in general organic solvents, and is widely used in coatings, synthetic resins, adhesives and other industries.

Chinese name Zinc 2-ethyloctanoate

Foreign name Zinc Octoate

Molecular weight 351.80

Appearance light yellow transparent liquid or water white transparent liquid

Solution stability, transparent and no precipitate

CAS 136-53-8

Flash point 40℃

Density 1.17g/cm3

Alias Zinc Isooctanoate

Zinc isooctanoate 136-53-8

Product properties:

Relative density: 1.12 (25℃)

Viscosity: 350mPa.s (25℃)

Flash point (PMCC): >131°C

Product Usage:

Zinc isooctanoate can be used as a polyurethane catalyst. The main features are slower gel and better crosslinking catalyst, which can reduce the acidity of the system, accelerate the crosslinking after the reaction and promote environmental protection. Therefore, it can be used to replace metal tin, lead, mercury, etc. Non-environmental protection catalysts;

Zinc isooctanoate is mainly used in polyurethane coatings, adhesives, elastomers, resins and other industries;

Recommended addition amount: 0.1%-1%PPHP.

Zinc isooctanoate 136-53-8

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

tertiary amine composite catalyst

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Product Name: Catalyst A400

Alias: catalyst A400, polyurethane catalyst A400, delayed amine A-400, NIAX catalyst A-400, delayed amine catalyst A-400, tertiary amine composite catalyst

A400 is light yellow transparent liquid at room temperature, soluble in water;

Density (25℃): 1.15 g/cm3;

Viscosity (25℃): 140mPa.s;

Flash point (PMCC): >93℃;

Polyurethane Catalyst A400 Catalyst A400 Delayed Amine A-400 NIAX Catalyst A-400 Delayed Amine Catalyst A-400 Tertiary Amine Compound Catalyst

application:

A400 is used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalytic effect, especially designed for automobile seat cushion production;

A400 can be measured by mixing with water or polyether polyol alone. It has a good effect on long-lasting pouring time and increasing open-cell foam structure. Both A400 and A300 are new types of delayed-action catalysts.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

delayed amine catalyst A-400

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Product Name: Catalyst A400

Alias: catalyst A400, polyurethane catalyst A400, delayed amine A-400, NIAX catalyst A-400, delayed amine catalyst A-400, tertiary amine composite catalyst

A400 is light yellow transparent liquid at room temperature, soluble in water;

Density (25℃): 1.15 g/cm3;

Viscosity (25℃): 140mPa.s;

Flash point (PMCC): >93℃;

Polyurethane Catalyst A400 Catalyst A400 Delayed Amine A-400 NIAX Catalyst A-400 Delayed Amine Catalyst A-400 Tertiary Amine Compound Catalyst

application:

A400 is used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalytic effect, especially designed for automobile seat cushion production;

A400 can be measured by mixing with water or polyether polyol alone. It has a good effect on long-lasting pouring time and increasing open-cell foam structure. Both A400 and A300 are new types of delayed-action catalysts.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

NIAX catalyst A-400

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Product Name: Catalyst A400

Alias: catalyst A400, polyurethane catalyst A400, delayed amine A-400, NIAX catalyst A-400, delayed amine catalyst A-400, tertiary amine composite catalyst

A400 is light yellow transparent liquid at room temperature, soluble in water;

Density (25℃): 1.15 g/cm3;

Viscosity (25℃): 140mPa.s;

Flash point (PMCC): >93℃;

Polyurethane Catalyst A400 Catalyst A400 Delayed Amine A-400 NIAX Catalyst A-400 Delayed Amine Catalyst A-400 Tertiary Amine Compound Catalyst

application:

A400 is used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalytic effect, especially designed for automobile seat cushion production;

A400 can be measured by mixing with water or polyether polyol alone. It has a good effect on long-lasting pouring time and increasing open-cell foam structure. Both A400 and A300 are new types of delayed-action catalysts.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

delayed amine A-400

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Product Name: Catalyst A400

Alias: catalyst A400, polyurethane catalyst A400, delayed amine A-400, NIAX catalyst A-400, delayed amine catalyst A-400, tertiary amine composite catalyst

A400 is light yellow transparent liquid at room temperature, soluble in water;

Density (25℃): 1.15 g/cm3;

Viscosity (25℃): 140mPa.s;

Flash point (PMCC): >93℃;

Polyurethane Catalyst A400 Catalyst A400 Delayed Amine A-400 NIAX Catalyst A-400 Delayed Amine Catalyst A-400 Tertiary Amine Compound Catalyst

application:

A400 is used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalytic effect, especially designed for automobile seat cushion production;

A400 can be measured by mixing with water or polyether polyol alone. It has a good effect on long-lasting pouring time and increasing open-cell foam structure. Both A400 and A300 are new types of delayed-action catalysts.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

polyurethane catalyst A400

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Product Name: Catalyst A400

Alias: catalyst A400, polyurethane catalyst A400, delayed amine A-400, NIAX catalyst A-400, delayed amine catalyst A-400, tertiary amine composite catalyst

A400 is light yellow transparent liquid at room temperature, soluble in water;

Density (25℃): 1.15 g/cm3;

Viscosity (25℃): 140mPa.s;

Flash point (PMCC): >93℃;

Polyurethane Catalyst A400 Catalyst A400 Delayed Amine A-400 NIAX Catalyst A-400 Delayed Amine Catalyst A-400 Tertiary Amine Compound Catalyst

application:

A400 is used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalytic effect, especially designed for automobile seat cushion production;

A400 can be measured by mixing with water or polyether polyol alone. It has a good effect on long-lasting pouring time and increasing open-cell foam structure. Both A400 and A300 are new types of delayed-action catalysts.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

catalyst A400

Published by BDMAEE on 2020-06-22 | Permalink

Overview:

Product Name: Catalyst A400

Alias: catalyst A400, polyurethane catalyst A400, delayed amine A-400, NIAX catalyst A-400, delayed amine catalyst A-400, tertiary amine composite catalyst

A400 is light yellow transparent liquid at room temperature, soluble in water;

Density (25℃): 1.15 g/cm3;

Viscosity (25℃): 140mPa.s;

Flash point (PMCC): >93℃;

Polyurethane Catalyst A400 Catalyst A400 Delayed Amine A-400 NIAX Catalyst A-400 Delayed Amine Catalyst A-400 Tertiary Amine Compound Catalyst

application:

A400 is used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalytic effect, especially designed for automobile seat cushion production;

A400 can be measured by mixing with water or polyether polyol alone. It has a good effect on long-lasting pouring time and increasing open-cell foam structure. Both A400 and A300 are new types of delayed-action catalysts.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

polyurethane catalyst 8154

Published by BDMAEE on 2020-06-22 | Permalink

Polyurethane delayed catalyst 8154

Product Name: Catalyst 8154

Alias: catalyst 8154, polyurethane delayed catalyst 8154, delayed catalyst 8154, polyurethane catalyst 8154

Polyurethane delayed catalyst 8154 is a chemical, mainly used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalysis, specially designed for the production and processing of seat cushions such as automobiles, for long-lasting pouring time and increase The open-cell foam structure works well.

use:

NT CAT8154 is mainly used to promote the reaction of urethane (polyol-isocyanate), which has the effect of delaying the initiation of the reaction;

NT CAT8154 is mainly used for polyurethane molded foam, prolonging milking time, improving fluidity and improving processing efficiency of foam.

8154 has a delayed blowing effect, which makes the milky time increase, and it is especially suitable for complex mold grooves that require a long time to cast. It can keep the foamed plastic products for a long time without decay, and the foam has good cell opening.

specification:

Appearance: amber

Flash point: >100℃

Viscosity 160mPa.s

Density 1.05g/ml

Hydroxyl value (MgKOH/g): 548

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.

delayed catalyst 8154

Published by BDMAEE on 2020-06-22 | Permalink

Polyurethane delayed catalyst 8154

Product Name: Catalyst 8154

Alias: catalyst 8154, polyurethane delayed catalyst 8154, delayed catalyst 8154, polyurethane catalyst 8154

Polyurethane delayed catalyst 8154 is a chemical, mainly used for molding polyurethane foam, water-soluble tertiary amine composite catalyst with delayed catalysis, specially designed for the production and processing of seat cushions such as automobiles, for long-lasting pouring time and increase The open-cell foam structure works well.

use:

NT CAT8154 is mainly used to promote the reaction of urethane (polyol-isocyanate), which has the effect of delaying the initiation of the reaction;

NT CAT8154 is mainly used for polyurethane molded foam, prolonging milking time, improving fluidity and improving processing efficiency of foam.

8154 has a delayed blowing effect, which makes the milky time increase, and it is especially suitable for complex mold grooves that require a long time to cast. It can keep the foamed plastic products for a long time without decay, and the foam has good cell opening.

specification:

Appearance: amber

Flash point: >100℃

Viscosity 160mPa.s

Density 1.05g/ml

Hydroxyl value (MgKOH/g): 548

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance.