BDMAEE – Page 95

N,N- Dicyclohexylmethylamine

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N-cyclohexyl-N-methylcyclohexylamine, N-methyldicyclohexylamine

English name: N-cycclohexyl-N-methylcyclohexanamine

Molecular formula: C13H25N

Relative molecular mass: 196

CAS Number: 7560-83-0

Chinese name N-methyldicyclohexylamine

Foreign name N,N- Dicyclohexylmethylamine

Molecular formula C13H25N

Molecular weight 195.34

CAS number 7560-83-0

MDL number MFCD00014289

EINECS No. 231-453-4

RTECS number HY4190000

BRN number 2074991

Density (g/mL) 0.912

Boiling point (ºC) 265

Refractive index 1.49

N,N- Dicyclohexylmethylamine / CAS 7560-83-0

performance:

N-methyldicyclohexylamine is a colorless transparent liquid, insoluble in water (solubility is less than 0.1%).

Viscosity (25℃, mPa.s): 10

Density (25℃, g/cm3): 0.89

Water-soluble: insoluble in water

Flash point (PMCC, ℃): 101

Hydroxyl value (mgKOH/g): 0

use:

N-methyldicyclohexylamine is a low odor tertiary amine auxiliary catalyst used to improve the skin curing of soft and rigid polyurethane foams;

N-methyldicyclohexylamine is mainly used as a co-catalyst for foaming catalysts and gel catalysts. Adding 20% of N-methyldicyclohexyl group to the main catalyst can accelerate curing and has basically no effect on other properties;

N-methyldicyclohexylamine is mainly used in rigid polyurethane building materials, rigid polyurethane spray foam and flexible polyurethane foam.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

High Quality N,N- Dicyclohexylmethylamine / CAS 7560-83-0

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N-cyclohexyl-N-methylcyclohexylamine, N-methyldicyclohexylamine

English name: N-cycclohexyl-N-methylcyclohexanamine

Molecular formula: C13H25N

Relative molecular mass: 196

CAS Number: 7560-83-0

Chinese name N-methyldicyclohexylamine

Foreign name N,N- Dicyclohexylmethylamine

Molecular formula C13H25N

Molecular weight 195.34

CAS number 7560-83-0

MDL number MFCD00014289

EINECS No. 231-453-4

RTECS number HY4190000

BRN number 2074991

Density (g/mL) 0.912

Boiling point (ºC) 265

Refractive index 1.49

N,N- Dicyclohexylmethylamine / CAS 7560-83-0

performance:

N-methyldicyclohexylamine is a colorless transparent liquid, insoluble in water (solubility is less than 0.1%).

Viscosity (25℃, mPa.s): 10

Density (25℃, g/cm3): 0.89

Water-soluble: insoluble in water

Flash point (PMCC, ℃): 101

Hydroxyl value (mgKOH/g): 0

use:

N-methyldicyclohexylamine is a low odor tertiary amine auxiliary catalyst used to improve the skin curing of soft and rigid polyurethane foams;

N-methyldicyclohexylamine is mainly used as a co-catalyst for foaming catalysts and gel catalysts. Adding 20% of N-methyldicyclohexyl group to the main catalyst can accelerate curing and has basically no effect on other properties;

N-methyldicyclohexylamine is mainly used in rigid polyurethane building materials, rigid polyurethane spray foam and flexible polyurethane foam.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

CAS 67151-63-7

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Bis(dimethylaminopropyl)isopropanolamine 67151-63-7 Jeffcat ZR-50 PC CAT NP15

Texacat ZR 50

Chinese name: bis(3-dimethylaminopropyl)amino-2-propanol

English name: Bis[3-(dimethylamino)propyl]amino-2-propanol

Molecular formula: C13H31N3O

Relative molecular mass: 245.4

CAS number: 67151-63-7

Bis[3-(dimethylamino)propyl]amino-2-propanol / CAS 67151-63-7

Physical and chemical properties:

Bis(dimethylaminopropyl) isopropanolamine is colorless or light yellow liquid, soluble in water

Relative density (25℃): 0.89

Viscosity (25℃): 17mPa.s

Hydroxyl value: 229mgKOH/g

Flash point (PMCC): 141℃

application:

Bis(3-dimethylaminopropyl)amino-2-propanol is an amine catalyst with low odor tertiary amine and active hydroxyl group; bis(3-dimethylaminopropyl)amino-2-propanol contains The hydroxyl group can react with isocyanate, making it a high activity low odor catalyst, so it is very suitable for low density foam packaging and high rebound molded foam.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Bis[3-(dimethylamino)propyl]amino-2-propanol

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Bis(dimethylaminopropyl)isopropanolamine 67151-63-7 Jeffcat ZR-50 PC CAT NP15

Texacat ZR 50

Chinese name: bis(3-dimethylaminopropyl)amino-2-propanol

English name: Bis[3-(dimethylamino)propyl]amino-2-propanol

Molecular formula: C13H31N3O

Relative molecular mass: 245.4

CAS number: 67151-63-7

Bis[3-(dimethylamino)propyl]amino-2-propanol / CAS 67151-63-7

Physical and chemical properties:

Bis(dimethylaminopropyl) isopropanolamine is colorless or light yellow liquid, soluble in water

Relative density (25℃): 0.89

Viscosity (25℃): 17mPa.s

Hydroxyl value: 229mgKOH/g

Flash point (PMCC): 141℃

application:

Bis(3-dimethylaminopropyl)amino-2-propanol is an amine catalyst with low odor tertiary amine and active hydroxyl group; bis(3-dimethylaminopropyl)amino-2-propanol contains The hydroxyl group can react with isocyanate, making it a high activity low odor catalyst, so it is very suitable for low density foam packaging and high rebound molded foam.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

High Quality Bis[3-(dimethylamino)propyl]amino-2-propanol / CAS 67151-63-7

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Bis(dimethylaminopropyl)isopropanolamine 67151-63-7 Jeffcat ZR-50 PC CAT NP15

Texacat ZR 50

Chinese name: bis(3-dimethylaminopropyl)amino-2-propanol

English name: Bis[3-(dimethylamino)propyl]amino-2-propanol

Molecular formula: C13H31N3O

Relative molecular mass: 245.4

CAS number: 67151-63-7

Bis[3-(dimethylamino)propyl]amino-2-propanol / CAS 67151-63-7

Physical and chemical properties:

Bis(dimethylaminopropyl) isopropanolamine is colorless or light yellow liquid, soluble in water

Relative density (25℃): 0.89

Viscosity (25℃): 17mPa.s

Hydroxyl value: 229mgKOH/g

Flash point (PMCC): 141℃

application:

Bis(3-dimethylaminopropyl)amino-2-propanol is an amine catalyst with low odor tertiary amine and active hydroxyl group; bis(3-dimethylaminopropyl)amino-2-propanol contains The hydroxyl group can react with isocyanate, making it a high activity low odor catalyst, so it is very suitable for low density foam packaging and high rebound molded foam.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

180KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

reactive foaming catalyst

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N,N,N’-trimethyl-N’-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl ether

Alias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalyst

English name: N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether

Molecular formula: C9H22N2O2

Relative molecular mass: 191.2

CAS number: 83016-70-0

Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalyst

Physical and chemical properties:

Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.95

Viscosity (25℃): 12mPa.s

Hydroxyl value: 295mgKOH/g

Flash point (PMCC): 118℃

application:

Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

high efficiency reactive foaming catalyst

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N,N,N’-trimethyl-N’-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl ether

Alias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalyst

English name: N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether

Molecular formula: C9H22N2O2

Relative molecular mass: 191.2

CAS number: 83016-70-0

Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalyst

Physical and chemical properties:

Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.95

Viscosity (25℃): 12mPa.s

Hydroxyl value: 295mgKOH/g

Flash point (PMCC): 118℃

application:

Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

CAS 83016-70-0

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N,N,N’-trimethyl-N’-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl ether

Alias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalyst

English name: N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether

Molecular formula: C9H22N2O2

Relative molecular mass: 191.2

CAS number: 83016-70-0

Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalyst

Physical and chemical properties:

Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.95

Viscosity (25℃): 12mPa.s

Hydroxyl value: 295mgKOH/g

Flash point (PMCC): 118℃

application:

Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

Jeffcat ZF-10

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N,N,N’-trimethyl-N’-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl ether

Alias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalyst

English name: N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether

Molecular formula: C9H22N2O2

Relative molecular mass: 191.2

CAS number: 83016-70-0

Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalyst

Physical and chemical properties:

Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.95

Viscosity (25℃): 12mPa.s

Hydroxyl value: 295mgKOH/g

Flash point (PMCC): 118℃

application:

Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

trimethylhydroxyethyl bisaminoethyl ether

Published by BDMAEE on 2020-06-18 | Permalink

Overview:

Chinese name: N,N,N’-trimethyl-N’-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl ether

Alias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalyst

English name: N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether

Molecular formula: C9H22N2O2

Relative molecular mass: 191.2

CAS number: 83016-70-0

Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalyst

Physical and chemical properties:

Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.95

Viscosity (25℃): 12mPa.s

Hydroxyl value: 295mgKOH/g

Flash point (PMCC): 118℃

application:

Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.