Manufacture – Page 17

Fomrez UL-1 Strong Gel Catalyst Momentive

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Product Name: Strong Gel Catalyst Dabco T120 Fomrez UL-1

Alias: Dabco T120,1185-81-5,Bis(dodecylthio)dibutyltin,Strong gel catalyst,Strong gel catalyst Dabco T120,Microporous elastomer catalyst Dabco T120,Hard foam catalyst Dabco T120 Fomrez UL-1

Product Description: Dabco T120 is CAS: 1185-81-5 Molecular Formula: C32H68S2Sn Molecular Weight:635.72EINECS No.:214-688-7 Related Category:metal Organic Mol File:1185-81-5.mol.

Product description:It is relatively high hydrolysis resistance, and the polyurethane foam system with UL-1 catalyst maintains its compatibility even after 4 weeks of storage, so it can extend the storage period of foam composites. In the field casting process, UL-1 replaces DBTDL, which can reduce the amount of amine catalyst and obtain longer emulsion time to have enough time to fill the mold cavity.

Brief introduction

Boiling point: 160°C 10mm

Densities: 1,04 g/cm3

Refractive index: 1.4992

Physical and chemical properties

Flash point: >204°C

Viscosity (25°C) about 20mPa.s

Vapor pressure 1.3kPa

Oily liquid, insoluble in water.

Thermally active, catalytic reaction starts slowly and then increases quickly.

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Fomrez SUL-11A Catalyst Momentive

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Fomrez SUL-11A mixture of di-n-butyltin oxide and dioctyl phthalate for use in polyurethane coatings, adhesives and silicone rubbers;

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Fomrez SUL-4 dibutyltin dilaurate Catalyst Momentive

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Dibutyltin dilaurate is an organotin additive that is soluble in organic solvents such as benzene, toluene, carbon tetrachloride, ethyl acetate, chloroform, acetone, petroleum ether and all industrial plasticizers, but insoluble in water. The high boiling point multi-purpose organotin catalysts on the market, dibutyltin dilaurate, are usually treated with special liquefaction, light yellow or colorless oily liquid at room temperature, white crystals at low temperature, can be used in PVC plastic additives, with excellent lubricity, transparency, weather resistance. Good resistance to sulfide pollution. It is used as stabilizer in soft transparent products, and as efficient lubricant in hard transparent products. It can also be used as catalyst for cross-linking reaction of acrylate rubber and carboxyl rubber, synthesis of polyurethane foam and polyester synthesis, catalyst for room temperature vulcanization of silicone rubber.

Product name: Dibutyltin dilaurate CAS 77-58-7 Fomrez SUL-4

Alias: Dibutyltin dilaurate; dibutyltin dodecanoate; dibutyltin dilaurate; dibutylbis(1-oxododecyloxy)tin; dibutyltin dilaurate; dibutyltin laurate; dibutyltin dilaurate; dibutyltin dilaurate

English name: Dibutyltin dilaurate

Product Code: DBTDL

Chinese name: dibutyltin dilaurate

CAS No. 77-58-7

Molecular formula C32H64O4Sn

Linear molecular formula (CH3CH2CH2CH2)2Sn[OCO(CH2)10CH3]2

Molecular weight: 631.57

MDL No.: MFCD00008963

Beilstein No. 4156980

EC No.: 201-039-8

UN No. 2922

1. English name: Dibutyltin dilaurate (DBTDL)

2.CAS No.:77-58-7

3.Molecular formula:C32H64O4Sn

Uses:

Light yellow or colorless liquid, white crystals at low temperature

1) Stabilizer and lubricant for PVC products. Soft transparent products or semi-soft products, and barium stearate, cadmium stearate and other metal soap or epoxy compounds and used with good lubricity, transparency, weather resistance, compatibility with plasticizers, no spray frost, no sulfide pollution, no adverse effects on heat bonding and printability. Such as: soft film, soft sheet, plastic shoes, hose and PVC conveyor belt. It can be used in hard products as organic tin with maleic acid or thiol system organic tin to improve the fluidity of resin material.

2) Used as catalyst and foam activator in polyurethane foam and silicone rubber synthesis material.

3) Used as a catalyst for synthesis in various adhesives.

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N700 Catalyst CAS 6674-22-2 BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Alias: 1,8-diazabicyclo-undec-7-ene, CAS 6674-22-2, catalyst DBU, epoxy promoter DBU, polyurethane catalyst DBU, azabicyclo, diazabicyclo, Polycat DBU, Lupragen N700, PC CAT DBU

Molecular formula: C9H16N2

Relative molecular mass: 152.2

CAS No.: 6674-22-2

Physical and chemical properties:

1,8-Diazabicycloundec-7-ene is a colorless to light yellow transparent oily liquid with relatively low volatility, almost odorless and alkaline. It changes color easily when exposed to light, is hygroscopic and corrosive.

Relative density: 1.04~1.07

Viscosity (25℃): 14mPa.s

Water solubility: soluble in water

Flash point (TCC):>96℃

Properties and Uses:

1,8-Diazabicycloundec-7-ene is used as a catalyst in polyurethane industry, it is a very active low odor gel catalyst, mainly used in the occasions where strong gel catalysis is needed.

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N600 Trimer Catalyst BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Physical and Chemical Properties

Lupragen N600 is a colorless to light yellow transparent liquid with a very faint odor or nearly odorless, soluble in water.

Relative density: 0.92-0.95

Freezing point: -59℃

Viscosity(25°C):26~33mPa.s

Flash point:153°C(COC) or 132°C(TMCC)

Boiling point:255°C or 140°C/133Pa

Vapor pressure(21°C):13Pa

Product Application

Lupragen N600 is a highly active trimer co-catalyst with foaming properties, usually shared with other catalysts.

Lupragen N600 is mainly used as a catalyst for polyurethane (PU) and polyisocyanurate (PIR) reactions, and actually has slightly higher catalytic selective activity for PU than PIR reactions, and is commonly used in laminate polyurethane hard foam, sprayed hard foam, molded hard foam, and more suitable for PIR hard foam sheets, various foaming agent foaming (including full water foaming) and other processes in the performance of water foaming hard foam systems.

Lupragen N600 is also suitable for microporous polyurethane elastomer and high resilience foam products.

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N501 Catalyst BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Physical and chemical properties:

Relative density (25℃): 0.78

Boiling point: 145°C

Refractive index (20℃): 1.4224~1.4244

Vapor pressure (20℃): 532Pa

Flash point: 32℃

Storage: Insulate from air, should be stored in a dry, cool and ventilated warehouse.

Product physical properties:

Molecular formula: C7H18N2;

Relative molecular mass: 130;

CAS No.: 110-95-2;

Boiling point: 145°C;

Density (25°C): 0.78g/cm3;

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N500 Catalyst BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Lupragen N500 N,N’,N”-tetramethyl-1,6-hexanediamine (TMHDA), heat insensitive, foam/gel equilibrium catalyst; flash point: 32°C;

Chemical N,N,N’,N’-Tetramethyl-1,6-hexanediamine, N,N,N’,N’-Tetramethyl-1,6-hexanediamine, molecular formula C10H24N2, molecular weight 172.31, CAS No. 111-18-2. liquid, an important intermediate for organic synthesis.

Chinese name

N,N,N’,N’-Tetramethyl-1,6-hexanediamine

Foreign name

N,N,N’,N’-Tetramethyl-1,6-hexanediamine

Molecular Formula

C10H24N2

Molecular weight

172.31

CAS

111-18-2

Brief introduction

Chinese name:N,N,N’,N’-tetramethyl-1,6-hexanediamine

Synonyms:N,N,N’,N’-Tetramethyl-1,6-hexanediamine;N,N,N’,N’-tetramethyl-1,6-hexanediamine;N,N,N’,N’-tetramethyl-1,6-hexanediamine;N,N,N’,N’-tetramethyl-1,6-hexanediamine;TMHDA

English name:N,N,N’,N’-Tetramethyl-1,6-hexanediamine

English Alias:N,N,N,N-tetramethylhexamethylenediamine; N,N,N,N-Tetramethyl-1,6-diaminohexane; 1,6-Bis-(dimethylamino)-hexane.

CAS:111-18-2

EINECS:203-842-9

Molecular formula:C10H26N2

Molecular weight:174.3257

Number

CAS No.:111-18-2

MDL No.: MFCD00008339

EINECS No.: 203-842-9

RTECS No.: MO1370000

PubChem No.：24846690

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N400 Catalyst Trimethylhydroxyethyl ethylene diamine BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Name: Trimethylhydroxyethyl ethyl ethylamine

Chinese name: N,N-dimethylaminoethyl-N’-methylaminoethanol; N,N,N’-trimethylaminoethyl ethanolamine; 2-(dimethylaminoethylmethylamino)ethanol

Alias: Trimethylhydroxyethyl ethyl diamine, trimethylhydroxyethyl ethyl diamine, CAS 2212-32-0, 2-(dimethylaminoethyl methylamino)ethanol, Dabco T, Toyocat RX5, Jeffcat Z-110, Lupragen N400, PC CAT NP80

English name: N,N,N’-trimethylaminoethylethanolamine;N,N-dimethylaminoethyl-N’-methylaminoethanol

Molecular formula: C7H18N2O

Relative molecular mass: 146.2

CAS No.: 2212-32-0

Performance:

Trimethylhydroxyethyl ethylenediamine is a colorless to light yellow liquid, easily soluble in water;

Viscosity (25℃,mPa.s): 7

Density (25℃,g/cm3): 0.91

Water solubility: soluble in water

Flash point (PMCC,℃): 89

Hydroxyl value (mgKOH/g): 387

Uses:

Trimethylhydroxyethyl ethylenediamine is a low odor reactive foaming catalyst.

Trimethylhydroxyethyl ethylenediamine is mainly used as a catalyst for polyether-based polyurethane soft foam, molded foam, semi-rigid foam and rigid foam.

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N302 Catalyst BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Lupragen N302 Colorless to light yellow low viscosity liquid A tertiary amine catalyst

Physical and Chemical Properties:

Pentamethyldipropylenetriamine is a colorless to light yellow, low viscosity liquid with a fishy odor. Soluble in water, aqueous solution is strongly alkaline.

Viscosity (25℃,mPa.s): 3

Density (25℃,g/cm3): 0.85

Water solubility: soluble in water

Flash point (PMCC,℃): 92

Hydroxyl value (mgKOH/g): 0

Characteristics and uses:

Pentamethyldipropylenetriamine is a tertiary amine catalyst capable of balancing the reaction of carbamate (polyol-isocyanate) with urea (isocyanate-water) in various flexible and rigid polyurethane foams;

Pentamethyldipropylenetriamine improves the porosity of flexible foams and reduces the brittleness and adhesion of rigid foams;

Pentamethyldipropylenetriamine is mainly used in the production of automotive seats and pillows, rigid polyether block foams.

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com

Lupragen N301 Catalyst Pentamethylenediethylenetriamine BASF

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Lupragen N301 N,N,N’,N”,N”-Pentamethyldiethylenetriamine (PMDETA), improved foam flow, strong foaming catalyst, primarily for hard foam; the catalyst is characterized as a strong foaming catalyst while maintaining good gelation properties. Provides balanced catalytic water/isocyanate (foaming) and polyol/isocyanate (gelling) reactions.

Pentamethyldiethylenetriamine is an organic compound with the molecular formula C9H23N3. colorless or slightly yellow transparent liquid, soluble in water, ether and alcohol solvents, and able to absorb moisture and carbon dioxide from the air. It is an efficient catalyst for polyurethane soft foam, used in the formulation of soft foam products, also can be used as an auxiliary catalyst for hard foam to improve the fluidity of PU foam in large capacity refrigerators.

Chinese name

Pentamethyldiethylenetriamine

Foreign name

N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias

1,1,4,7,7-Pentamethyldiethylenetriamine; N N N’ N’ N”-Pentamethyldiethylenetriamine; 1,1,4,7,7-Pentamethyldiethylenetriamine; N N N’ N’ N”-Pentamethyldiethylenetriamine; 1,1,4,7,7-Pentamethyldiethylenetriamine; 1,1,4,7,7-Pentamethyldiethylenetriamine; 1,1,4,7,7-Pentamethyldiethylenetriamine N,N,N’,N”,N”-pentamethyldiethylenetriamine; N,N,N’,N”-pentamethyldiethylenetriamine

Chemical formula

C9H23N3

Molecular weight

173.30

CAS number

3030-47-5

Melting point

-20℃

Boiling point

198 ℃

Water solubility

Soluble in water

Density

0.83 g/cm³

Appearance

Colorless or slightly yellow transparent liquid

Flash point

53 ℃

Application

Highly efficient catalyst for polyurethane flexible foam

Safety description

S26, S36/37/39, S45

Hazard symbol

T

Hazard description

R22, R24, R34

UN Dangerous Goods Number

2734

MDL No:

MFCD00014876

Refractive index:

1.442(lit.)

Linear molecular formula

[(CH3)2NCH2CH2]2NCH3

Purity

≥98%

Physical parameters

Vapor pressure:0.23mmHg(20℃)

Density:0.83g/mL(25℃)(lit.)

Melting point:-20℃(lit.)

Boiling point:198℃(lit.)

Flash point:53℃

Refractive index(n20/D):1.442(lit.)

Package

Packed in clean, dry, sealed and leak-free special plastic drums with a net weight of 20kg/25kg/180kg per drum.

Storage and transportation

When transporting Catalyst, it should be strictly protected from rain and staining, carefully and gently stored to prevent leakage from collision with hard objects. When storing Catalyst, it should be stored at room temperature in a ventilated and dry warehouse, avoiding humid environment, and the storage temperature should be kept below 25℃, avoiding sunlight as much as possible, and away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Shelf life

Under proper storage conditions, the shelf life is 6 months from the date of manufacture, after which the product can be used after retesting.

Safety Information

Catalyst is somewhat toxic and should be rinsed with soapy water promptly after contact with skin. Staff can wear eye protection or safety glasses for the purpose of eye protection. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Leak handling

Stop spills as much as possible while ensuring safety. If a minor spill is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent disposal. If a large spill occurs, the spilled material should be collected for subsequent disposal. Avoid entering groundwater or surface water as the material is not readily biodegradable. All collected spilled material should be disposed of in accordance with local environmental regulations.

Disclaimers

The information and technical advice provided above has been obtained from our reliable sources, however, we make no express or implied warranties with respect to the data provided and make no promises herein. If our products are to be used, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information provided by us is beyond our control and therefore these responsibilities are the responsibility of the user. The condition and method of handling, storage, use or disposal of this product is beyond our control and may be beyond our knowledge, and in no event will we be liable for loss, damage or costs associated with the improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety sheets for our products or contact our marketing services department.

Uses:

Promotes the reaction of hydroxyl functional groups with NCO

Safety Information:

Catalyst is somewhat toxic and should be rinsed promptly with soapy water after contact with skin. Staff may wear eye protection or safety glasses for eye protection purposes. Eye wash and drenching equipment should be provided near the workplace. When working in places where contact with the product is possible, attention should be paid to personal hygiene and the skin in contact with the product should be washed with washing products before eating, smoking and leaving the workplace.

Shelf life.

Keep unopened,two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Technical support and business contacts E-mail：sales@newtopchem.com