Manufacture – Page 2

Toyocat DMI gel catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Aliases: Toyocat DMI, gel catalyst Toyocat DMI, epoxy curing agent Toyocat DMI, polyurethane hard foam Toyocat DMI

Product Description: Toyocat DMI is used for polyurethane rigid foam and microporous elastomers, belonging to the gel catalyst.

Physicochemical Properties

The appearance of Toyocat DMI is light yellow crystal or white ridged crystal.

Melting point: 39-41 ° C

Boiling point :93~94℃

Product Application

Toyocat DMI is used for polyurethane rigid foam and microporous elastomers, belonging to the gel catalyst.

Toyocat DMI is used as epoxy resin curing agent, and can be widely used in epoxy resin bonding, coating, pouring, encapsulation, impregnation and composite materials.

Leak Treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

The catalyst should be washed with soapy water immediately after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Toyocat DMCH Hard bubble catalyst for tertiary amine Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Toyocat DMCH catalyst C-8 is a tertiary amine catalyst. It is a strong base that is soluble in water and most organic solvents. Due to its excellent properties and strong gel activity, it can be used in a variety of foam applications.

When Toyocat DMCH catalyst C-8 is used as the main catalyst in PUR, the recommended dosage is 1 to 5 php.

Toyocat DMCH catalyst C-8 dimethylcyclohexylamine (DMCHA), a standard hard bubble catalyst;

Physicochemical properties

Toyocat DMCH is colorless to light yellow transparent liquid at room temperature, soluble in alcohol and ether solvents, insoluble in water.

Density (25℃) : 0.85-0.87g /cm?

Freezing point: -60℃

Flash point (closed cup) : 40~41℃

Boiling range: 160~165℃

Viscosity (25℃) : 2mPa.s

Product Application

The main use of Toyocat DMCH is as a catalyst for rigid polyurethane foam.

Toyocat DMCH is a medium active amine catalyst with low viscosity, which is used for refrigerator rigid foam, plate, spraying, and on-site injection of polyurethane rigid foam. The catalyst has a catalytic effect on both gel and foam, providing a more balanced catalytic performance for the foaming reaction and gel reaction of hard bubbles, it is stronger for the reaction of water and isocyanate (foaming reaction), and also has a moderate catalytic activity for the reaction of polyols and isocyanate, it is a strong initial catalyst for foam reaction. In addition to being used for hard bubbles, it can also be used as an auxiliary catalyst for molding soft bubbles and semi-hard bubbles.

Toyocat DMCH is especially suitable for the preparation of two-component system, can be dissolved in a variety of hard foam polyols and additives, in the combination of materials, adjustable, and can be stored for a long time.

Disclosure treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Toyocat DAEM Catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Chinese name
4-[2-(dimethylamino-ethyl)] morpholine

English name
4-(2-(dimethylamino)ethyl)morpholine

Alias
N-dimethylaminoethyl morpholine

N, n-dimethyl-4-morpholinethamine

4-[2-(dimethylaminoethyl)] morpholine

CAS
4385-05-1

EINECS
224-492-3

Chemical formula
C8H18N2O

Molecular weight
158.24

InChIInChI
= 1 / C8H18N2O/c1-9 (2) 3-4-10-5-7-11-3-4-10/8 h2, h3-1-2 h3

Density
0.925g/mLat 25°C(lit.)

Boiling point
93-94°C20mm Hg(lit.)

Flash point
168°F

Steam pressure
3 mm Hg (20 °C)

Refractive index
n20/D 1.4582(lit.)

Acidity coefficient
9.41±0.28(Predicted)

Storage conditions
2-8°C

Leak treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

TEDA-L33B polyurethane amine catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

TEDA-L33B is a mixture of 33% triethylenediamine and 67% 1,4 butanediol. It is used as a catalyst in the production of polyurethane foams. TEDA-L33B is a quick-acting catalyst that improves the fluidity and surface structure of polyurethane foams. It also provides faster mold release times. TEDA-L33B is used in a variety of polyurethane foam applications, including soles, mattresses, and insulation.

Here are some of the characteristics of TEDA-L33B:

Appearance: Clear colorless liquid

Smell: mild

Density: 1.02g/ml

Flash point: 104 °C

Solubility: Easily soluble in water

Here are some safety precautions to take when handling TEDA-L33B:

Keep this product out of reach of children.

Avoid contact with skin and eyes.

If swallowed, do not try to induce vomiting. Call poison control immediately.

Store in a cool, dry place.

Here are some storage and disposal instructions for TEDA-L33B:

Store in a cool, dry place.

Keep container airtight.

Keep out of light.

Dispose in accordance with local, state, and federal regulations.

Here are some more details about TEDA-L33B:

TEDA-L33B is a tertiary amine catalyst, which means it contains three nitrogen atoms. Tertiary amine catalysts are commonly used in the production of polyurethane foams because they act quickly and give good control over foam properties.

TEDA-L33B is a clear, colorless liquid with a mild odor. Soluble in water, it has a flash point of 104 ° C.

TEDA-L33B is used in a variety of polyurethane foam applications, including soles, mattresses, and insulation. In the sole, TEDA-L33B helps to improve the fluidity of the foam and the surface structure of the final product. In mattresses, TEDA-L33B helps improve the comfort and durability of the foam. In insulation, TEDA-L33B helps to improve the thermal and acoustic properties of the foam.

TEDA-L33B is a safe product when used according to the instructions. However, be sure to keep it out of reach of children and avoid contact with skin and eyes. If swallowed, do not try to induce vomiting. Call poison control immediately.

TEDA-L33B should be stored in a cool, dry place. Keep the container airtight and away from light.

TEDA-L33B should be disposed of in accordance with local, state, and federal regulations.

Disposal of Spills

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

TEDA-L25B polyurethane tertiary amine catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

TEDA-L25B is a tertiary amine catalyst used in the production of polyurethane foam. It is a clear, colorless liquid with a mild odor. TEDA-L25B is a quick-acting catalyst that improves the fluidity and surface structure of polyurethane foams. It also provides faster mold release times. TEDA-L25B is used in a variety of polyurethane foam applications, including soles, mattresses, and insulation.

Alias: Dabco 25-S, Lupragen N202, TEDA-L25B, TEDA-L25B, Dabco Tertiary Amine Catalyst, polyurethane Tertiary Amine Catalyst, Catalyst 25-S, catalyst for sole

Here are some of the properties of TEDA-L25B:

· Appearance: clear, colorless liquid

· Smell: mild

· Density: 1.02 g/ml

· Flash point: 104 °C

· Solubility: Easily soluble in water

Here are some safety precautions to take when handling TEDA-L25B:

· Keep this product out of reach of children.

· Avoid contact with skin and eyes.

· If swallowed, do not try to induce vomiting. Call poison control immediately.

· Store in a cool, dry place.

Here are some storage and disposal instructions for TEDA-L25B:

· Store in a cool, dry place.

· Keep container airtight.

· Avoid light.

· Dispose in accordance with local, state, and federal regulations.

Here are some additional safety precautions to take when handling TEDA-L25B:

· Wear gloves and safety goggles when handling TEDA-L25B.

· Work in a well-ventilated area.

· Do not eat, drink or smoke while handling TEDA-L25B.

· If TEDA-L25B comes into contact with your skin, wash the area immediately with soap and water.

· If TEDA-L25B gets in your eyes, immediately rinse with water for at least 15 minutes and seek medical attention.

· If you inhale TEDA-L25B, move to fresh air and seek medical attention if you develop any symptoms.

Here is some additional information about TEDA-L25B:

·TEDA-L25B is available in a variety of sizes and packages.

·TEDA-L25B is available from a number of dealers.

Here are some uses for TEDA-L25B:

· Soles

· mattress

· insulation

· elastomer

· adhesive

· paint

· ink

· sealer

· textiles

· paper

· plastic

· food

· medicine

· cosmetics

TEDA-L25B is a versatile catalyst that can be used in a variety of applications. It is a safe and effective product when used as directed. However, it is important to follow safety precautions when handling TEDA-L25B.

Here are some other details about the purpose of TEDA-L25B:

· In the sole of the shoe, TEDA-L25B helps to improve the fluidity of the foam and the surface structure of the final product. This results in the sole being more comfortable to wear and providing a better grip.

· In mattresses, TEDA-L25B helps increase the comfort and durability of the foam. This makes the mattress more comfortable to sleep on, as well as lasting longer.

· In insulation, TEDA-L25B helps to improve the thermal and acoustic properties of the foam. This results in the insulation being more efficient at keeping heat in and out, and is also better at noise reduction.

TEDA-L25B is a valuable tool for manufacturers of polyurethane foam products. It is a safe and effective catalyst that can be used to improve the performance of foam products in a variety of applications.

Leak Treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

TEDA-A20 polyurethane tertiary amine catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

TEDA-A20 is a clear, colorless, low-viscosity liquid tertiary amine catalyst for the production of polyurethane foams. It is a quick-acting catalyst that improves the fluidity and surface structure of polyurethane foams. It also provides faster mold release times. TEDA-A20 is used in a variety of polyurethane foam applications, including soles, mattresses, and insulation.

Alias: Dabco R-8020, Jeffcat TD-20, TEDA-A20, Dabco Tertiary Amine Catalyst, Polyurethane Tertiary Amine Catalyst, Catalyst R-8020

Here are some of the properties of TEDA-A20:

Appearance: Clear colorless liquid

Smell: mild

Density: 1.02g/ml

Flash point: 104 °C

Solubility: Easily soluble in water

Here are some safety precautions to take when handling TEDA-A20:

Keep this product out of reach of children.

Avoid contact with skin and eyes.

If swallowed, do not try to induce vomiting. Call poison control immediately.

Store in a cool, dry place.

Here are some storage and disposal instructions for TEDA-A20:

Store in a cool, dry place.

Keep the container airtight.

Keep out of light.

Dispose in accordance with local, state, and federal regulations.

Here are some additional safety precautions to take when handling TEDA-A20:

Wear gloves and safety goggles when handling TEDA-A20.

Work in a well-ventilated area.

Do not eat, drink, or smoke while handling TEDA-A20.

If TEDA-A20 comes into contact with your skin, wash the area immediately with soap and water.

If TEDA-A20 gets in your eyes, immediately rinse with water for at least 15 minutes and seek medical attention.

If you inhale TEDA-A20, move to fresh air and seek medical attention if you develop any symptoms.

Here is some other information about TEDA-A20:

TEDA-A20 is available in a variety of sizes and packages.

TEDA-A20 is available from a number of distributors.

Here are some uses for TEDA-A20:

Soles

mattress

Insulation

Elastomer

Adhesive

Paint

Ink

Sealer

Textiles

paper

Plastic

Food

Medicine

Makeup

TEDA-A20 is a versatile catalyst that can be used in a variety of applications. It is a safe and effective product when used as directed. However, it is important to follow safety precautions when handling TEDA-A20.

Leak handling

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

TEDA L33E polyurethane amine catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Product Name: TEDA L33E, 33% triethylenediamine EG solution

Alias: Dabco EG, PC CAT TD 33EG, Niax A-533, Lupragen N203, TEDA-L33E, Polyurethane amine catalyst EG, sole catalyst EG

Product Description: DABCO EG catalyst for soles

Physical Properties:

Appearance: Light yellow liquid

Viscosity (25 ° C,mPa.s) : 60

Density (25 ° C,g/cm3) : 1.09

Water soluble: Soluble in water

Flash point (PMCC, ° C) : 105

Hydroxyl value (mgKOH/g) : 1207

Uses:

TEDA L33E is a strong gel type tertiary amine catalyst, which is a solution composed of 33% triethylene diamine (TEDA) and 67% ethylene glycol;

TEDA L33E can be used to catalyze the urethane (polyol-isocyanate) reaction of soft foams, commonly used in shoe soles, and can also be used in polyurethane self-crust products.

about:

TEDA L33E catalyst is a polyurethane tertiary amine that is a solution of 33% triethylenediamine (TEDA) and 67% ethylene glycol (MEG). The DABCO EG catalyst is a powerful catalyst for the carbamate reaction (polyol-isocyanate), commonly used in shoe soles, but can also be used in soft foam applications.

Type TEDA L33E

TEDA L33E is a polyurethane catalyst.

Chemical name: triethylenediamine

Function: Catalyst

Compatible polymers and resins: Polyurethane (PU)

Synonyms: 1, 4-diazabicyclic [2.2.2] octane, 1, 4-ethylenepiperazine

Features:

Multi-functional polyurethane amine catalyst, polyurethane gel catalyst, promote the reaction liquid of polyurethane foaming.

Leak treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remained unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

TEDA L33 polyurethane amine catalyst Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Product Name: TEDA L33, 33% triethylene diamine EG solution

Alias: Dabco EG, PC CAT TD 33EG, Niax A-533, Lupragen N203, TEDA-L33E, Polyurethane amine catalyst EG, sole catalyst EG

Product Description: DABCO EG catalyst for soles

Physical Properties:

Appearance: Light yellow liquid

Viscosity (25 ° C,mPa.s) : 60

Density (25 ° C,g/cm3) : 1.09

Water soluble: Soluble in water

Flash point (PMCC, ° C) : 105

Hydroxyl value (mgKOH/g) : 1207

Uses:

TEDA L33 is a strong gel type tertiary amine catalyst, which is a solution composed of 33% triethylene diamine (TEDA) and 67% ethylene glycol;

TEDA L33 can be used to catalyze the urethane (polyol-isocyanate) reaction of soft foams, commonly used to make shoe soles, and can also be used in polyurethane self-crust products.

about:

TEDA L33 catalyst is a polyurethane tertiary amine that is a solution of 33% triethylenediamine (TEDA) and 67% ethylene glycol (MEG). The DABCO EG catalyst is a powerful catalyst for the carbamate reaction (polyol-isocyanate), commonly used in shoe soles, but can also be used in soft foam applications.

Type TEDA L33

TEDA L33 is a polyurethane catalyst.

Chemical name: triethylenediamine

Function: Catalyst

CAS No. : 280-57-9

Compatible Polymers and Resins: Polyurethane (PU)

Synonyms: 1, 4-diazabicyclic [2.2.2] octane, 1, 4-ethylenepiperazine

Features:

Multi-functional polyurethane amine catalyst, polyurethane gel catalyst, promote the reaction liquid of polyurethane foaming.

Leak treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

TEDA catalyst triethylene diamine Tosoh

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Triethylene diamine, also known as triethylenediamine. White or light yellow crystals. Ammonia flavor, this product is an organic synthesis intermediate, synthetic light stabilizing material, widely used in polyurethane foam, elastomer and plastic products and molding process. Or polymer initiator, can be used as ethylene polymerization catalyst and epoxy-ethane polymerization catalyst, its derivatives can be used as corrosion inhibitors, emulsifiers and so on.

Basic information:

Short for: TEDA, DABCO,PC CAT TD100

English name: TRIETHYLENEDIAMINE

Chemical formula: C6H12N2

Physicochemical properties

TEDA is normally colorless or white crystal, which is easy to absorb moisture and caking when exposed to air, is alkaline, and can absorb CO2 in the air and turn yellow. It is easily soluble in acetone, benzene and ethanol. Pure TEDA is very toxic, inhaling saturated TEDA vapor will cause minor mucosal irritation, eye damage, irritation of the skin will cause allergies.

Relative density (25 ° C) : about 1.14

Melting point of pure product: 158-159℃

Flash point: 60℃

Boiling point: 174℃, easy to sublimate, slightly ammonia flavor

Steam pressure: about 67Pa at 21℃, 533Pa at 50℃, 7.7kPa at 100℃

Preparation:

There are several methods to synthesize TEDA at home and abroad. The general process is to put the aqueous solution of amine or alcohol amine raw material through the reactor filled with catalytic zeolite at a certain flow rate, react at 320-400℃, 0.3MPa under the condition of purification, to obtain TEMA.

Disclosure treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

FASCAT9102 tertiary amine catalyst triisocrylate butyl tin Arkema PMC

Published by BDMAEE on 2023-07-04 | Permalink

Overview:

Chinese name: FASCAT9201 catalyst, dibutyltin oxide (food grade)

Alias: FASCAT9201 catalyst, Dibutyltin oxide (Food grade)

English name: FASCAT9201

CAS 818-08-6 dibutyltin oxide (food grade)

CAS 818-08-6 Dibutyltin oxide (Food grade)

Product name: Butyltin triiso-octoate Cas23850-94-5

Chinese name: monobutyl tin triiso-octoate, FASCAT9102 catalyst

Chinese synonyms: tris (2-ethyl-1-caproic acid) butyl tin; Mono-butyl oxide derivatives; Monobutyl tin triiso-octoate; Butyltin tri (iso-octanoic acid), catalyst FASCAT9102

English name: Butyltin tris(2-ethylhexanoate)

Product code: TRIS

English name: Butyltin Tris(2-ethylexanoate)

CAS number: 23850-94-4

Molecular Formula: C28H54O6Sn

Physical properties:

Melting point: -33°C

Density: 1.105 g/mL at 25 °C(lit.)

Refractive index: n20/D 1.465(lit.)

Flash point gt; 230 °F [1]

Safety information:

Dangerous Goods Mark: T

Hazard Class Code: 23/24/25-36/37/38

Safety Instructions: 26-28-36/37/39-45

Dangerous Goods Transport Number: UN 2788 6.1/PG 3

WGK Germany: 3

RTECS No. WH6788500

TSCA: Yes

Physicochemical properties:

Amorphous white solid,

Uses:

High temperature transesterification reaction is used to produce coating resin

Used to prepare alkyd resin

Spill treatment

Stop leaks as much as possible while ensuring safety. If a minor leak is found, treat it with sand or other absorbent material and place it in a clean, dry container for subsequent treatment. If a large amount of leakage occurs, the leaked material should be collected for subsequent treatment. Avoid material entering groundwater or surface water, because it is not easily degraded by biological matter. All collected leakage materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from reliable sources. However, the data provided by us is without express or implied warranties, and no commitments are made herein. If you need to use our products, we recommend a series of tests. The application, use, processing or production of products based on the technical information provided by us is outside our control and therefore the responsibility lies with the user. Conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge, and under no circumstances will we be liable for loss, damage or related expenses arising from improper handling, storage, use or disposal of this chemical. For more information, please review the technical safety specifications of our products or contact our Marketing Services department.

Safety Information:

Catalyst, rinse with soapy water promptly after contact with skin. The staff can wear an eye mask or safety glasses to achieve the purpose of eye protection. Eye washing and bathing facilities should be available near the workplace. When working in places that may come into contact with the product, you should pay attention to personal hygiene and use detergent to wash the skin in contact with the product before eating, smoking and leaving the work.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com