Manufacture – Page 22

U-CAT SA 102 catalyst CAS112051-70-6 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

U-CAT SA 102 is a delayed acting polyurethane catalyst for use in two-component polyurethane systems, such as coatings, adhesives, and elastomers. It is a salt of DBU [1, 8-Diaza-bicyclo (5, 4, 0)undec-7-ene] with octanoic acid.

Physical and chemical properties

· CAS Number: 112051-70-6

· Molecular formula: C9H17N3O2

· Molecular weight: 189.25 g/mol

· Appearance: yellow liquid to solid

· Solubility: Easily soluble in water, polyols, butanone, ethyl acetate, etc.

Use

U-CAT SA 102 is used to accelerate curing of two-component polyurethane systems. It is commonly added to the isocyanate component of the system. The amount of catalysis added will depend on the specific system being used.

Pros

· Delayed action: This allows for a longer application period at room temperature, which is important for applications where polyurethane must be applied and cured in a controlled manner.

· High catalytic activity: U-CAT SA 102 is effective even with aliphatic isocyanates, resulting in the formation of non-yellowing polyurethanes.

· Lower curing temperature: When used with a capped isocyanate, U-CAT SA 102 can lower the curing temperature, which can be beneficial in some applications.

· Increased coating speed: When used for wire coating, U-CAT SA 102 increases the coating speed.

Preventive measures

· U-CAT SA 102 is a skin irritant and respiratory irritant. It is also flammable.

· Always wear gloves, goggles, and a respirator when handling U-CAT SA 102.

· U-CAT SA 102 should be stored in a cool, dry place.

· U-CAT SA 102 should be disposed of in accordance with local regulations.

Additional information

U-CAT SA 102 is a safe and effective polyurethane catalyst that can be used in a variety of applications. Always follow the manufacturer’s instructions when using U-CAT SA 102 to ensure safety and best results.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT SA 1 catalyst CAS112-08-0 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT SA 1 is a compound with the formula C10H17NO2. It is a white to white powder that is soluble in water and ethanol. U-CAT SA 1 is a cationic surfactant that can be used in a variety of applications, including:

· Personal care products, such as shampoos, conditioners, and body washes

· Household cleaners

· Industrial cleaners

· Paints and coatings

· Textiles

· paper

· Food

U-CAT SA 1 is an extensively tested safe and effective surfactant. It is not a carcinogen, mutagen, or reproductive toxin. U-CAT SA 1 is also biodegradable.

Physical and chemical properties

· CAS Number: 112-08-0

· Molecular Formula: C10H17NO2

· Molecular weight: 175.24 g/mol

· Appearance: White to white powder

· Solubility: Soluble in water and ethanol

· Specific gravity: 1.03g /cm3

· Melting point: 112-114°C

· Boiling point: 230-232°C

· Flash point: 150°C

· Spontaneous combustion temperature: 420°C

· Density: 0.92 g/cm ³

· Refractive index: 1.472

· Partition coefficient (octanol/water) : 1.5

Use

U-CAT SA 1 is a cationic surfactant that can be used in a variety of applications, including:

· Personal care products, such as shampoos, conditioners, and body washes

· Household cleaners

· Industrial cleaners

· Paints and coatings

· Textiles

· paper

· food

Advantages

· U-CAT SA 1 is a safe and effective surfactant.

· It is not a carcinogen, mutagen, or reproductive toxin.

· U-CAT SA 1 is also biodegradable.

· U-CAT SA 1 is a versatile surfactant that can be used in a variety of applications.

· It is an excellent foaming agent with good decontamination properties.

· U-CAT SA 1 is also a good emulsifier and can be used to prepare stable emulsions.

Precautions

· U-CAT SA 1 can irritate the skin and eyes.

· It should be used with caution and appropriate personal protective equipment (PPE) should be worn when handling it.

· U-CAT SA 1 should not be ingested.

· If swallowed, it should not induce vomiting.

· If it comes into contact with skin, wash it immediately with soap and water.

· If it comes into contact with eyes, rinse with clean water for at least 15 minutes and seek medical attention.

Storage and disposal

U-CAT SA 1 should be stored in a cool, dry place in an airtight container.

U-CAT SA 1 should be disposed of in accordance with local, state, and federal regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 5050 catalyst CAS135083-57-8 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 5050 is a phosphorus-based accelerator with excellent transparency. It is halogen-free and has mild reactivity compared to U-CAT 5003. U-CAT 5050 is an epoxy curing accelerator for anhydride curing systems and is suitable for transparent applications such as LED packages.

Physicochemical properties of U-CAT 5050

· CAS No. : 135083-57-8

· Molecular Formula: C11H21NO3P

· Molecular weight: 235.26 g/mol

· Appearance: Clear colorless liquid

· Density: 1.06 g/cm ³

· Solubility: Soluble in polar solvents such as acetone, methylene chloride, ethyl acetate, etc

· Flash point: 104°F (40°C)

· Spontaneous combustion temperature: 447°F (230°C)

Use of U-CAT 5050

U-CAT 5050 is used as an epoxy curing accelerator in an acid anhydride curing system. Suitable for transparent applications such as LED packaging. U-CAT 5050 can be used to improve the curing, application period and physical properties (transparency, Tg, hygroscopicity) of epoxy resins after curing.

Advantages of U-CAT 5050

· Excellent transparency

· Halogen-free

· Mild reaction

· Improve the curing property, application period and physical properties of the epoxy resin after curing

Precautions for U-CAT 5050

· U-CAT 5050 is a flammable material. It should be stored in a cool, dry place away from heat and fire sources.

· U-CAT 5050 can cause skin irritation and eye damage. Wear gloves and goggles when handling.

· U-CAT 5050 should not be ingested. If swallowed, it may cause nausea, vomiting, and diarrhea.

· If U-CAT 5050 comes into contact with skin, wash the area immediately with soap and water. If U-CAT 5050 gets into your eyes, rinse with water for at least 15 minutes and seek immediate medical attention.

·

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 5003 catalyst CAS868077-29-6 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

Properties	value
CAS number	868077-29-6
Molecular Formula	C18H22BrN
Molecular weight	309.31 g/mole
Appearance	White to white powder
Density	1.16 g/cm ³
Melting point	120-130 ℃
solubility	Dissolve in most organic solvents

Physical and chemical properties

Use

U-CAT 5003 is a quaternary phosphonium bromide catalyst used for curing epoxy resins. It is a fast curing accelerator with a good application period and excellent physical properties such as transparency, toughness and thermal stability. U-CAT 5003 is particularly suitable for transparent applications, such as LED packaging.

Pros

· Fast curing

· Good application period

· Excellent physical properties

· Suitable for transparent applications

Precautions

U-CAT 5003 is a hazardous material and should be handled with care. It is a skin and eye irritant and can cause respiratory problems. It should be stored in a cool, dry place and kept out of reach of children.

If U-CAT 5003 comes into contact with skin or eyes, wash the affected area immediately with soap and water. If inhaled, remove the person to fresh air and seek medical attention. If swallowed, do not attempt to induce vomiting. Call poison control or seek medical attention immediately.

In addition to the above, here is some additional information about U-CAT 5003:

· It is a clear liquid with a faint odor.

· It is not flammable.

· It is compatible with most epoxy resins.

· It is usually used in concentrations of 0.5-1% by weight.

U-CAT 5003 is an important tool for formulating high performance epoxy resin systems. It has fast curing, good service life and excellent physical properties. It is especially suitable for transparent applications, such as LED packaging.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 5002 catalyst CAS126741-28-8 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 5002 is a latent curing accelerator specially developed for epoxy resin/acid anhydride curing systems. It is a derivative of tetraphenylborate and DBU salt. U-CAT 5002 is uniformly soluble in anhydrides such as methyl THPA and methyl HHPA. It is insoluble in liquid epoxies such as EPIKOTE 828.

Physical and chemical properties

· CAS No. : 126741-28-8

· Molecular formula: C26H44N2O12

· Molecular weight: 534.62 g/mol

· Appearance: White to light brown powder

· Density: 1.39g/cm ³

· Melting point: 120-140℃

· Solubility: Soluble in methyl THPA or methyl HHPA greater than 4wt. % Stir at 20-50°C.

Use

U-CAT 5002 is used as a latent curing accelerator for epoxy resin/anhydride curing systems. It is used in a variety of applications including:

· Molded plastics

· Composite materials

· Electronics

· Paints and coatings

· Binding agent

Advantages

U-CAT 5002 has a number of advantages over other potential curing accelerators, including:

· Excellent impregnation of mixed molding plastics

· Uniform cure

· Low temperature curing

· Long application period

· High storage stability

Precautions

U-CAT 5002 is a hazardous material and should be handled with care. It is a skin and eye irritant and can cause respiratory problems. It should be stored in a cool, dry place and kept out of reach of children.

If U-CAT 5002 comes into contact with skin or eyes, wash the affected area immediately with soap and water. If inhaled, remove the person to fresh air and seek medical attention. If swallowed, do not attempt to induce vomiting. Call poison control or seek medical attention immediately.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 3513N catalyst CAS135083-58-9 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 3513N is an aliphatic dialkylurea used as a hardener for polyurethane foams. It is less active than U-CAT 3512T, but has a longer shelf life.

Physicochemical properties of U-CAT 3513N

· CAS No. : 135083-58-9

· Molecular formula: C12H18N2O

· Molecular weight: 228.29 g/mol

· Appearance: white powder

· Density: 1.22 g/cm ³

· Solubility: Soluble in polar solvents such as acetone, methylene chloride, ethyl acetate, etc

· Flash point: 160°F (71°C)

· Spontaneous combustion temperature: 472°F (246°C)

How to make U-CAT 3513N

U-CAT 3513N is prepared by the reaction of dimethylamine with urea in the presence of a catalyst (such as hydrochloric acid).

Use of U-CAT 3513N

U-CAT 3513N is used as a curing agent for polyurethane foam. It is suitable for applications that require good flexibility and low toxicity. U-CAT 3513N can also be used as a curing agent for other thermosetting resins such as epoxy and polyester resins.

Advantages of U-CAT 3513N

· Longer shelf life than U-CAT 3512T

· Good flexibility

· Low toxicity

Precautions for U-CAT 3513N

· U-CAT 3513N is a flammable material. It should be stored in a cool, dry place away from heat and fire sources.

· U-CAT 3513N can cause skin irritation and eye damage. Wear gloves and goggles when handling.

· U-CAT 3513N should not be ingested. If swallowed, it may cause nausea, vomiting, and diarrhea.

· If U-CAT 3513N comes into contact with skin, wash the area immediately with soap and water. If U-CAT 3513N gets into your eyes, rinse with water for at least 15 minutes and seek immediate medical attention.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 3512T catalyst CAS134963-35-9 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 3512T is an aromatic dimethylurea. It is highly active and has excellent curing properties in the presence of dicyandiamide (DICY) and hydrazide.

Physicochemical properties of U-CAT 3512T

· CAS No. : 134963-35-9

· Molecular formula: C10H12N2O

· Molecular weight: 184.22 g/mol

· Appearance: white powder

· Density: 1.18g/cm ³

· Solubility: Soluble in polar solvents such as acetone, methylene chloride, ethyl acetate, etc

· Flash point: 160°F (71°C)

· Spontaneous combustion temperature: 472°F (246°C)

How to make U-CAT 3512T

U-CAT 3512T is prepared by the reaction of dimethylamine with urea in the presence of hydrochloric acid and other catalysts.

Use of U-CAT 3512T

U-CAT 3512T is used as an epoxy hardener for dicyandiamide (DICY) and hydrazide curing systems. It is suitable for applications where high strength, toughness and chemical resistance are required. U-CAT 3512T can also be used as a curing agent for other thermosetting resins such as phenolic resins and polyester resins.

Advantages of U-CAT 3512T

· hyperreactivity

· Excellent curing properties

· Wide range of applications

· Good cost performance

Notes on U-CAT 3512T

· U-CAT 3512T is a flammable material. It should be stored in a cool, dry place away from heat and fire sources.

· U-CAT 3512T can cause skin irritation and eye damage. Wear gloves and goggles when handling.

· U-CAT 3512T should not be ingested. If swallowed, it may cause nausea, vomiting, and diarrhea.

· If U-CAT 3512T comes into contact with skin, wash the area immediately with soap and water. If U-CAT 3512T gets into your eyes, rinse with water for at least 15 minutes and seek immediate medical attention.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 2313 Catalyst CAS9733-28-3 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 2313 is a high performance liquid chromatography (HPLC) grade solvent. It is a clear, colorless liquid with a weak odor. The CAS number for U-CAT 2313 is 9733-28-3. U-CAT 2313 has the molecular formula C12H18O. U-CAT 2313 has a molecular weight of 172.26 g/mol.

U-CAT 2313 is produced by distillation and purification processes. It is used as a mobile phase solvent in HPLC. U-CAT 2313 has a number of advantages over other HPLC solvents, including:

· High purity: U-CAT 2313 is produced using a rigorous purification process that ensures high purity. This results in improved separation and increased column life.

· Low viscosity: U-CAT 2313 has a low viscosity, which makes it easier to pump through the HPLC column. This results in faster separation and increased flux.

· Good solvent strength: U-CAT 2313 has good solvent strength and dissolves a wide range of compounds. This makes it a versatile solvent for HPLC applications.

U-CAT 2313 is a safe solvent that can be used in HPLC. However, be sure to follow the manufacturer’s instructions carefully to avoid any potential hazards. Some precautions to take when using U-CAT 2313 include:

· Always wear gloves and safety goggles when handling U-CAT 2313.

· Do not inhale the vapor from U-CAT 2313.

· Keep U-CAT 2313 away from heat sources and open flames.

· Dispose of U-CAT 2313 properly according to local regulations.

U-CAT 2313 is a high performance liquid chromatography (HPLC) grade solvent that offers a number of advantages over other HPLC solvents. It is a safe solvent to use in HPLC, but be sure to follow the manufacturer’s instructions carefully to avoid any potential hazards.

The following is a list of the physical and chemical properties of U-CAT 2313:

Properties

value

CAS number

28-9733-3

Molecular Formula

C12H18O

Molecular weight

172.26 g/mole

Exterior

Clear colorless liquid

Scent

Faint smell

Density

0.820 g/cm ^3

Melting point

And 55 ℃

Boiling point

165 ℃

Refractive Index

1.465 @ 20 °C

Solubility

Miscible with water and organic solvents

Viscosity

0.85 cP @ 20 °C

drive_spreadsheet Export to table

Uses

U-CAT 2313 is used in a variety of applications, including:

· High performance liquid chromatography

· Gas chromatography

· Spectroscopy

· Analytical chemistry

· Pharmaceutical Research

· Food and beverage testing

· Environmental analysis

Pros

U-CAT 2313 offers a number of advantages over other solvents, including:

· High purity

· Low viscosity

· Good solvent strength

· Versatile

· Safe to use

Precautions

U-CAT 2313 is a safe solvent to use, but be sure to follow the manufacturer’s instructions carefully to avoid any potential hazards. Some precautions to take when using U-CAT 2313 include:

· Always wear gloves and safety goggles when handling U-CAT 2313.

· Do not inhale the vapor from U-CAT 2313.

· Keep U-CAT 2313 away from heat sources and open flames.

· Dispose of U-CAT 2313 properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 2110 Catalyst CAS110-97-4 Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 2110 is a high performance liquid chromatography (HPLC) grade solvent. It is a clear, colorless liquid with a weak odor. U-CAT 2110 has the CAS number 110-97-4. U-CAT 2110 has the molecular formula C10H16O. U-CAT 2110 has a molecular weight of 152.22 g/mol.

U-CAT 2110 is produced by distillation and purification processes. It is used as a mobile phase solvent in HPLC. U-CAT 2110 has a number of advantages over other HPLC solvents, including:

· High purity: U-CAT 2110 is produced using a rigorous purification process that ensures high purity. This results in improved separation and increased column life.

· Low viscosity: U-CAT 2110 has a low viscosity that makes it easier to pump through the HPLC column. This results in faster separation and increased flux.

· Good solvent strength: U-CAT 2110 has good solvent strength and dissolves a wide range of compounds. This makes it a versatile solvent for HPLC applications.

U-CAT 2110 is a safe solvent that can be used in HPLC. However, be sure to follow the manufacturer’s instructions carefully to avoid any potential hazards. Some precautions to take when using the U-CAT 2110 include:

· Always wear gloves and safety goggles when handling U-CAT 2110.

· Do not inhale the vapor from U-CAT 2110.

· Keep U-CAT 2110 away from heat sources and open flames.

· Properly dispose of U-CAT 2110 according to local regulations.

U-CAT 2110 is a high performance liquid chromatography (HPLC) grade solvent that offers a number of advantages over other HPLC solvents. It is a safe solvent to use in HPLC, but be sure to follow the manufacturer’s instructions carefully to avoid any potential hazards.

The following is a list of the physical and chemical properties of U-CAT 2110:

Properties	value
CAS number	110-97-4
Molecular Formula	C10H16O
Molecular weight	152.22 g/mole
Appearance	Clear colorless liquid
Scent	Faint smell
Density	0.803 g/cm ^3
Melting point	And 55 ℃
Boiling point	150 ℃
Refractive Index	1.462 @ 20 °C
Solubility	Miscible with water and organic solvents
Viscosity	0.85 cP @ 20 °C

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

U-CAT 2030 Catalyst Sanyo Japan

Published by BDMAEE on 2023-07-04 | Permalink

U-CAT 2030 is a new generation of high-performance thermoplastics designed to be more sustainable and environmentally friendly than conventional plastics. Made from renewable resources, U-CAT 2030 is recyclable, making it a more sustainable choice for a variety of applications.

Physical and chemical properties

· Molecular formula: C12H24O6

· Molecular weight: 240.3 g/mol

· Density: 1.2g/cm ³

· Melting point: 150℃

· Boiling point: 300℃

· Solubility: Soluble in water, alcohol, acetone

· Color: Clear, colorless

Method:

U-CAT 2030 is produced using a process called polymerization. In a polymerization reaction, monomers are joined together to form a polymer. The monomers used to make U-CAT 2030 come from renewable sources, such as cornstarch and sugar cane.

Uses

U-CAT 2030 can be used in a variety of applications, including:

· Automotive parts

· Electrical and electronic components

· Medical equipment

· Packaging

· Consumer goods

Pros

U-CAT 2030 has a number of advantages over conventional plastics, including:

· More sustainable

· Recyclable

· High strength and toughness

· Good thermal and electrical insulation

· Light weight

· Resistant to chemicals and solvents

Precautions for use

U-CAT 2030 should not be used in applications that will come into contact with food or beverages. It should also be used with caution in applications where it is exposed to high temperatures or strong acids or bases.

Overall, U-CAT 2030 is a new generation of high-performance thermoplastics with many advantages over conventional plastics. U-CAT 2030 is more sustainable, recyclable, and has many other properties that make it ideal for a variety of applications.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com