Manufacture – Page 26

Jeffcat ZF-10 catalyst CAS83016-70-0 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat ZF-10 is a reactive foaming catalyst for low emission/low odor foam applications. It is a clear, colorless to yellowish liquid with a slight odor.

Physical and chemical properties

· CAS Number: 83016-70-0

· Molecular Formula: C12H27NO

· Molecular weight: 229.35 g/mol

· Density: 0.95 g/cm ³

· Flash point: 118.5°C (245.3°F)

· Solubility in water: completely miscible

Application

Jeffcat ZF-10 is used in a variety of polyurethane foam applications, including:

· Flexible polyether blocks

· Car Forming

· Rigid packaging foam

Pros

Jeffcat ZF-10 has a number of advantages over other catalysts, including:

· Low odor

· Good thermal stability

· Wide processing window

· Excellent foam properties

Precautions for use

Jeffcat ZF-10 is a hazardous material and should be handled with care. Be sure to follow all safety precautions when using this product. Some precautions to take include:

· Wear personal protective equipment, such as gloves, goggles, and a respirator.

· Avoid contact with skin and eyes.

· Keep away from heat sources and open flames.

· Do not inhale vapors.

· Dispose of it properly according to local regulations.

Additional information

For more information about the Jeffcat ZF-10, contact your local Huntsman representative.

Physicochemical Properties Sheet

Properties	value
CAS number	83016-70-0
Molecular Formula	C12H27NO
Molecular weight	229.35 g/mole
Density	0.95 g/cm ³
Flash point	118.5°C (245.3°F)
Solubility in water	Complete miscibility

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat Z-130 catalyst CAS6711-48-4 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat Z-130 is a low-odor, low-emission active gel catalyst used in the production of polyurethane foams. It is a clear, colorless liquid with a mild odor. Jeffcat Z-130 is a good catalyst for surface curing and provides a good balance between gel and foam. It is suitable for ester and ether blocks, HR molded soft foams, microporous materials, elastomers, RIM and RRIM, and hard package foams.

Physicochemical properties

· CAS number: 6711-48-4

· Molecular formula: C10H25N3

· Molecular weight: 187.33 g/mol

· Density: 0.95 g/cm ³

· Flash point: 130°F (54°C)

· Solubility: miscible with water, alcohol, ketone

Application

Jeffcat Z-130 is used to produce a variety of polyurethane foams, including:

· Rigid foams

· Soft foam

· Molding foam

· Paint foam

· Elastomer

advantage

Jeffcat Z-130 has a number of advantages over other polyurethane foam catalysts, including:

· Low odor

· Low emissions

· Good balance between gel and blow

· Suitable for a variety of applications

Precautions for use

Jeffcat Z-130 is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If Jeffcat Z-130 comes into contact with skin or eyes, wash the affected area with soap and water immediately.

Storage

Jeffcat Z-130 should be stored in a cool, dry place. It should be stored in an airtight container to prevent evaporation.

Treatment

Jeffcat Z-130 should be disposed of in accordance with local regulations.

The following is a list of physical and chemical properties of Jeffcat Z-130:

Properties	value
CAS number	6711-48-4
Molecular Formula	C10H25N3
Molecular weight	187.33 g/mole
Density	0.95 g/cm ³
Flash point	54°C (130°F)
Solubility	Miscible with water, alcohols and ketones

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat Z-110 catalyst CAS111-42-2 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat Z-110 is a non-volatile, clear, colorless liquid with a slight odor. It is a tertiary amine that is used as a catalyst in the production of polyurethane foams. Jeffcat Z-110 is effective in a wide range of isocyanates and polyols and can be used to produce a variety of foam characteristics, including density, hardness, and elasticity.

Physical and chemical properties

Properties	value
CAS number	111-42-2
Molecular Formula	C7H17NO3
Molecular weight	147.21 g/mole
Appearance	Clear colorless liquid
Scent	Mild
Density	0.94 g/cm ³
Flash point	120°F (49°C)
Solubility	Soluble in water, alcohol, and other polar solvents
Ph (pH)	9.5

Applications

Jeffcat Z-110 is used in a variety of polyurethane foam applications, including:

· Rigid foams for insulation and construction

· Soft foam for furniture, bedding, and other applications

· Elastomer for seals, gaskets, and other products

· RIM and RRIM for cars and other parts

· Microcellular foam for packaging and other applications

Advantages

· Non-volatile, clear, colorless liquid

· Suitable for a variety of isocyanates and polyols

· Can be used to produce foam with various characteristics

· Stable at high temperatures

· Low Toxicity

Precautions

· Eye and skin irritation

· May be harmful if swallowed

· The steam may irritate the nose and throat

· May cause cancer in animals

· May be harmful to the environment

Storage and disposal

· Store in a cool, dry place

· Keep out of reach of children and pets

· Wash your hands thoroughly after handling

· Wear gloves and goggles when handling

· Dispose according to local regulations

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat TR-90 catalyst CAS101426-11-0 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat TR-90 is a 1,3, 5-tri (3-(dimethylamino-) propyl) -hexahydro-S-triazine. It is a back-end curing cocatalyst that provides improved dimensional stability. It is used in microporous materials, elastomers, RIM, RRIM, and hard spray packaging foam systems.

Physical and chemical properties:

Properties	value
CAS number	The 101426-11-0
Molecular Formula	C12H23N5
Molecular weight	255.32 g/mole
Looks	White to white powder
Solubility	Soluble in methylene chloride, toluene, xylene
Insoluble in water

Applications:

Jeffcat TR-90 is used in a variety of applications, including:

· Microcellular foam: Jeffcat TR-90 can be used to improve the dimensional stability and strength of microcellular foam.

· Elastomer: Jeffcat TR-90 can be used to improve the toughness and durability of elastomers.

· RIM and RRIM: Jeffcat TR-90 can be used to improve the strength, toughness and dimensional stability of RIM and RRIM components.

· Rigid spray packaging foam: Jeffcat TR-90 can be used to improve the strength, toughness and dimensional stability of rigid spray packaging foam.

·

Advantages:

· The Jeffcat TR-90 offers improved dimensional stability.

· The Jeffcat TR-90 is effective in a variety of applications.

· Jeffcat TR-90 is easy to use.

Precautions for use:

· Jeffcat TR-90 is a skin irritant and potential carcinogen.

· Jeffcat TR-90 should be used in a well-ventilated area.

· Wear gloves and safety goggles when handling the Jeffcat TR-90.

· Jeffcat TR-90 should not be ingested.

See the Safety Data Sheet (SDS) for more information.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat TD-100 catalyst CAS111-42-2 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat TD-100 is a tertiary amine catalyst used in the production of polyurethane foam. It is a clear, colorless liquid with a mild odor. Jeffcat TD-100 is compatible with most common polyols and isocyanate systems. It is also compatible with water-based systems.

Physical and chemical properties:

Properties	value
Looks	Clear colorless liquid
Scent	Mild
pH	10.5
Specific Gravity	1.02
Flash Point	100 degrees Fahrenheit
Spontaneous combustion temperature	450 degrees Fahrenheit
Solubility	Miscible with water, alcohols and ketones
Stable	Stabilize at room temperature

CAS number

111-42-2

Molecular Formula

C12H23N

Molecular weight

171.29 g/mole

Apply

Jeffcat TD-100 is used to catalyze the reaction of polyols and isocyanates to produce polyurethane foam. It is used in a variety of applications including:

· Rigid foam

· Soft foam

· Spray foam

· Forming foam

· Styrofoam

Precautions for use

Jeffcat TD-100 is a flammable liquid and should be handled with care. It should be stored in a cool, dry place away from heat sources and open flames. Jeffcat TD-100 can irritate skin and eyes. If it comes into contact with skin or eyes, wash the affected area immediately with soap and water. If inhaled, move to fresh air and seek medical attention if breathing becomes difficult.

Consult the safety data sheet for more information about the Jeffcat TD-100.

Shelf Life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat TD-33A catalyst CAS107-16-9 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat TD-33A is a tertiary amine catalyst used in the production of polyurethane foam. It is a 33% solution of triethylenediamine (TEDA) in dipropylene glycol. Jeffcat TD-33A is compatible with most common polyols and isocyanate systems. It is also compatible with water-based systems.

Physical and chemical properties:

Properties	value
Looks	Clear colorless liquid
Scent	Mild, amine-like
pH	10.5
Specific Gravity	1.03
Flash Point	110 degrees Fahrenheit
Spontaneous combustion temperature	450 degrees Fahrenheit
Solubility	Miscible with water, alcohols and ketones
Stable	Stabilize at room temperature

CAS number

107-16-9

Molecular Formula

C12H23N3

Molecular weight

197.34 g/mole

Apply

Jeffcat TD-33A is used to catalyze the reaction of polyols and isocyanates to produce polyurethane foam. It is used in a variety of applications including:

· Rigid foam

· Soft foam

· Spray foam

· Forming foam

· Styrofoam

·

Precautions for use

Jeffcat TD-33A is a flammable liquid and should be handled with care. It should be stored in a cool, dry place away from heat sources and open flames. Jeffcat TD-33A can irritate skin and eyes. If it comes into contact with skin or eyes, wash the affected area with soap and water immediately. If inhaled, move to fresh air and seek medical attention if breathing becomes difficult.

Consult the safety data sheet for more information about Jeffcat TD-33A.

Shelf Life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat TD-20 catalyst CAS107-16-9 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat TD-20 is a tertiary amine catalyst used in the production of polyurethane foam. It is a 20% solution of triethylenediamine (TEDA) in dipropylene glycol. Jeffcat TD-20 is compatible with most common polyols and isocyanate systems. It is also compatible with water-based systems.

Physical and chemical properties:

Properties	value
Looks	Clear colorless liquid
Scent	Mild, amine-like
pH	10.5
Specific Gravity	1.03
Flash Point	110 degrees Fahrenheit
Spontaneous combustion temperature	450 degrees Fahrenheit
Solubility	Miscible with water, alcohols and ketones
Stable	Stabilize at room temperature

CAS number

107-16-9

Molecular Formula

C12H23N3

Molecular weight

197.34 g/mole

Apply

Jeffcat TD-20 is used to catalyze the reaction of polyols and isocyanates to produce polyurethane foam. It is used in a variety of applications including:

· Rigid foam

· Soft foam

· Spray foam

· Forming foam

· Styrofoam

·

Precautions for use

Jeffcat TD-20 is a flammable liquid and should be handled with care. It should be stored in a cool, dry place away from heat sources and open flames. Jeffcat TD-20 can irritate skin and eyes. If it comes into contact with skin or eyes, wash the affected area with soap and water immediately. If inhaled, move to fresh air and seek medical attention if breathing becomes difficult.

See the safety data sheet for more information on Jeffcat TD-20.

Here are some additional precautions to take when using the Jeffcat TD-20:

· Wear gloves, goggles, and a respirator when handling a Jeffcat TD-20.

· Avoid inhaling vapors or fumes.

· Do not eat or drink while using Jeffcat TD-20.

· Wash your hands thoroughly after handling Jeffcat TD-20.

· Dispose of Jeffcat TD-20 properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat PMDETA catalyst CAS3030-47-5 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

Jeffcat PMDETA is a pentamethyldiethylenetriamine. It is a clear, colorless liquid with a mild odor. Jeffcat PMDETA is used as a catalyst in the production of polyurethane foams. It is compatible with most common polyols and isocyanates.

Physicochemical properties

Properties	value
Appearance	Clear colorless liquid
Scent	Mild, amine-like
pH	11.6
Specific gravity	0.85
Flash point	68 °C (154 °F)
Spontaneous combustion temperature	158 °C (316 °F)
Solubility	Miscible with water, alcohols and ketones
Stable	Stabilize at room temperature

CAS number

3030-47-5

Molecular Formula

C8H20N2O

Molecular weight

160.26 g/mole

Apply

Jeffcat PMDETA is used to catalyze the reaction of polyols and isocyanates to produce polyurethane foam. It is used in a variety of applications including:

· Rigid foam

· Soft foam

· Spray foam

· Molding foam

· Styrofoam

Precautions for use

Jeffcat PMDETA is a flammable liquid and should be handled with care. It should be stored in a cool, dry place away from heat sources and open flames. Jeffcat PMDETA can irritate the skin and eyes. If it comes into contact with skin or eyes, wash the affected area with soap and water immediately. If inhaled, move to fresh air and seek medical attention if breathing becomes difficult.

Consult the safety data sheet for more information on Jeffcat PMDETA.

Here are some additional precautions to take when using Jeffcat PMDETA:

· Wear gloves, goggles, and a respirator when handling Jeffcat PMDETA.

· Avoid inhaling vapors or fumes.

· Do not eat or drink while using Jeffcat PMDETA.

· Wash your hands thoroughly after handling Jeffcat PMDETA.

· Dispose of Jeffcat PMDETA properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat PM catalyst CAS96-24-5 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

Jeffcat PM is a polyol melamine catalyst used in the production of polyurethane foam. It is a clear, colorless liquid with a mild odor. Jeffcat PM is a highly active catalyst that provides a fast curing speed. It is also a low-odor catalyst that is ideal for applications where odor needs to be a concern.

Physicochemical properties

· CAS No. : 96-24-5

· Molecular Formula: C3H8N2O

· Molecular weight: 92.12 g/mol

· Density: 1.03 g/cm ³

· Flash point: 115°F (46°C)

· Solubility: miscible with water, alcohol, ketone

Application

Jeffcat PM is used to produce a variety of polyurethane foams, including:

· Rigid foams

· Soft foam

· Molding foam

· Paint foam

· elastomer

Strengths

Jeffcat PM has a number of advantages over other polyurethane foam catalysts, including:

· Highly active catalysts

· Fast curing

· Low odor catalyst

Precautions for use

Jeffcat PM is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If Jeffcat PM comes into contact with skin or eyes, wash the affected area with soap and water immediately.

Storage

Jeffcat PM should be stored in a cool, dry place. It should be stored in an airtight container to prevent evaporation.

Treatment

Jeffcat PM should be disposed of in accordance with local regulations.

The following is a list of the physical and chemical properties of Jeffcat PM:

Properties	value
CAS number	24-96-5
Molecular Formula	C3H8N2O
Molecular weight	92.12 g/mole
Density	1.03 g/cm ³
Flash point	115°F (46°C)
Solubility	Miscible with water, alcohols and ketones

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat NMM Catalyst CAS109-02-4 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat NMM is a clear, colorless to light yellow liquid with a mild odor. It is an organic solvent that is miscible with water and is a good solubilizer for a variety of materials, including polymers, resins and pigments. Jeffcat NMM is also a mild catalyst that can be used to improve the curing of polyurethane foams.

Physical and chemical properties

Property	Value
CAS number	The 109-02-4
Molecular Formula	C5H11NO
Molecular weight	101.15 g/mole
Density	0.98 g/cm ³
Boiling point	155 ℃
Melting point	– 20 ℃
Flash point	65 ℃
Solubility	Miscible with water, ethanol, and other organic solvents

Application

Jeffcat NMM is used in a variety of applications, including:

· As a solvent for polymers, resins, and pigments

· As a catalyst for curing polyurethane foams

· As a solubilizer for a variety of materials

· As a corrosion inhibitor

· As a defoamer

Advantages

Jeffcat NMM has many advantages, including:

· It is a clear, colorless liquid with a slight odor

· It is water soluble

· It is a good solubilizer for a variety of materials

· It is a mild catalyst

· Non-corrosive

· It is non-toxic

Precautions for use

Jeffcat NMM is flammable and may be harmful if swallowed or inhaled. It is very important to use Jeffcat NMM in a well-ventilated area and avoid contact with skin and eyes. If Jeffcat NMM comes into contact with skin or eyes, rinse immediately with water. If you swallow Jeffcat NMM, call Poison control immediately.

Storage and disposal

Jeffcat NMM should be stored in an airtight container in a cool, dry place. It should be kept away from heat sources, sparks, and flames.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com