Manufacture – Page 27

Jeffcat NEM Catalyst CAS100-74-3 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat NEM is an N-ethyl morpholine catalyst for the production of polyurethane foams. It is a clear, colorless liquid with a mild odor. Jeffcat NEM is a low-odor catalyst with a good balance between gel and foam. It is very useful in cold mold HR foams.

Physical and chemical properties

· CAS Number: 100-74-3

· Molecular Formula: C6H13NO

· Molecular weight: 117.17 g/mol

· Density: 0.94 g/cm ³

· Flash point: 130°F (54°C)

· Solubility: miscible with water, alcohol, ketone

Application

Jeffcat NEM is used to produce a variety of polyurethane foams, including:

· Rigid foams

· Soft foam

· Molding foam

· Paint foam

· Elastomer

advantage

Jeffcat NEM has a number of advantages over other polyurethane foam catalysts, including:

· Low odor

· A good balance between gel and blow

· Ease of use

· High cost performance

Precautions for use

Jeffcat NEM is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If Jeffcat NEM comes into contact with skin or eyes, wash the affected area with soap and water immediately.

Storage

Jeffcat NEM should be stored in a cool, dry place. It should be stored in an airtight container to prevent evaporation.

Treatment

Jeffcat NEM should be disposed of in accordance with local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat DPA Catalyst CAS63469-23-8 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat DPA is a low-odor, low-emission, high-performance polyurethane foam catalyst. It is a clear, colorless to pale yellow liquid with a mild odor. Jeffcat DPA is used in a variety of polyurethane foam applications, including soft foam, hard foam, elastomer and RIM systems.

Physicochemical properties

Properties	value
CAS number	63469-23-8
Molecular Formula	C11H26N2O2
Molecular weight	218.3 g/mole
Density	0.95 g/cm ³
Flash point	90 ℃
Water soluble	miscibility

Application

Jeffcat DPA is used in a variety of polyurethane foam applications, including:

· Soft foam: Jeffcat DPA is used to produce quality soft foam with good fluidity, gelling and strength.

· Hard foam: Jeffcat DPA is used to produce high performance hard foam with good thermal insulation properties.

· Elastomers: Jeffcat DPA is used to produce high-performance elastomers with good mechanical properties.

· RIM Systems: Jeffcat DPA is used to produce high-quality RIM systems with good fluidity and strength.

Pros

Jeffcat DPA has a number of advantages over other polyurethane foam catalysts, including:

· Low odor: Jeffcat DPA has a low odor and is ideal for applications where odor control is required.

· Low emissions: Jeffcat DPA has low emissions and is a more environmentally friendly option.

· High Performance: Jeffcat DPA offers high performance in a variety of polyurethane foam applications.

Precautions for use

Jeffcat DPA is strongly irritating to the skin and eyes. It should be handled lightly and gloves should be worn when handling it. Jeffcat DPA should also be kept away from heat sources and open flames.

Additional information

Jeffcat DPA is available in a variety of sizes and can be purchased from many vendors. For more information, contact your local supplier.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat DMP catalyst CAS106-58-1 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

Jeffcat DMP is a dimethylpiperazine catalyst for the production of polyurethane foam. It is a clear, colorless liquid with a mild odor. Jeffcat DMP is a good catalyst for promoting surface curing. Typical applications of Jeffcat DMP include ether-based and ester based block and high resilience (HR) molded soft foams. In addition, JeffCAT DMP is used in rigid foam for packaging.

Physical and chemical properties

· CAS No. : 106-58-1

· Molecular Formula: C6H16N2

· Molecular weight: 114.21 g/mol

· Density: 0.95 g/cm ³

· Flash point: 102°F (39°C)

· Solubility: miscible with water, alcohol, ketone

Application

Jeffcat DMP is used to produce a variety of polyurethane foams, including:

· Rigid foams

· Soft foam

· Molding foam

· Paint foam

· elastomer

Strengths

Jeffcat DMP has a number of advantages over other polyurethane foam catalysts, including:

· A good catalyst that promotes surface curing

· Low odor

· Easy to use

· High cost performance

Precautions for use

Jeffcat DMP is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If Jeffcat DMP comes into contact with skin or eyes, wash the affected area with soap and water immediately.

Storage

Jeffcat DMP should be stored in a cool, dry place. It should be stored in an airtight container to prevent evaporation.

Treatment

Jeffcat DMP should be disposed of in accordance with local regulations.

The following is a list of physicochemical properties of Jeffcat DMP:

Properties	value
CAS number	58-106-1
Molecular Formula	C6H16N2
Molecular weight	114.21 g/mole
Density	0.95 g/cm ³
Flash point	102 F (39 C)
Solubility	Miscible with water, alcohols and ketones

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat DMEA catalyst CAS107-15-3 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Jeffcat DMEA is a dimethylethanolamine (DMEA) product. It is a clear, colorless liquid with a mild odor. DMEA is a versatile chemical that can be used in a variety of applications, including:

· Solvents: DMEA can be used as a solvent for a variety of materials, including plastics, resins, and oils.

· Hardener: DMEA can be used as hardener for a variety of resins, including epoxy and polyurethane resins.

· Buffer: DMEA can be used as a buffer for a variety of chemical reactions.

· Surfactants: DMEA can be used as a surfactant in a variety of applications, including personal care products and industrial cleaners.

Physicochemical properties:

Properties	value
CAS number	15-107-3
Molecular Formula	CH3(CH2)2NH2
Molecular weight	73.13 g/mole
Appearance	Clear colorless liquid
Density	0.91 g/cm ³
Boiling point	187 ℃
Flash point	112 ℃
Solubility	Miscible with water, ethanol, and other polar solvents

Apply:

Jeffcat DMEA is used in a variety of applications, including:

· Solvent: DMEA can be used as a solvent in a variety of materials, including plastics, resins, and oils. It is commonly used in the production of polyurethane foams and elastomers.

· Hardener: DMEA can be used as hardener for a variety of resins, including epoxies and polyurethanes. It is commonly used in the production of coatings, adhesives, and composites.

· Buffer: DMEA can be used as a buffer for a variety of chemical reactions. It is commonly used to produce pharmaceuticals and other products that require a specific pH level.

· Surfactants: DMEA can be used as a surfactant in a variety of applications, including personal care products and industrial cleaners. It is commonly used to improve the wetting and dispersing properties of these products.

Pros:

· Jeffcat DMEA is a versatile chemical that can be used in a variety of applications.

· DMEA is relatively inexpensive.

· DMEA is easy to use.

Precautions for use:

· Jeffcat DMEA is a skin irritant and potential carcinogen.

· Jeffcat DMEA should be used in a well-ventilated area.

· Wear gloves and safety goggles when handling Jeffcat DMEA.

· Jeffcat DMEA should not be ingested.

See the Safety Data Sheet (SDS) for more information.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat DMDEE Catalyst CAS11225-78-5 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

Jeffcat DMDEE is a 2,2′ -dimorpholine diethyl ether amine. It is a clear, colorless liquid with a mild odor. Jeffcat DMDEE is a selective foaming catalyst that provides a stable prepolymer system. It is ideal for single-component systems. Typical applications for Jeffcat DMDEE include ether and ester based blocks and high resilience (HR) molded soft foams.

Physicochemical properties

· CAS number: 11225-78-5

· Molecular formula: C10H19NO2

· Molecular weight: 189.26 g/mol

· Density: 1.02 g/cm ³

· Flash point: 120 °F (49 °C)

· Solubility: miscible with water, alcohol, ketone

Application

Jeffcat DMDEE is used to produce a variety of polyurethane foams, including:

· Rigid foams

· Soft foam

· Molding foam

· Paint foam

· elastomer

Strengths

Jeffcat DMDEE has a number of advantages over other polyurethane foam catalysts, including:

· Selective foam catalyst

· Stable prepolymer system

· Ideal for single component systems

Precautions for use

Jeffcat DMDEE is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If Jeffcat DMDEE comes into contact with skin or eyes, wash the affected area with soap and water immediately.

Storage

Jeffcat DMDEE should be stored in a cool, dry place. It should be stored in an airtight container to prevent evaporation.

Treatment

Jeffcat DMDEE should be disposed of in accordance with local regulations.

The following is a list of physicochemical properties of Jeffcat DMDEE:

Property	Value
CAS number	11225-78-5
Molecular Formula	C10H19NO2
Molecular weight	189.26 g/mole
Density	1.02 g/cm ³
Flash point	120°F (49°C)
Solubility	Miscible with water, alcohols and ketones

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat DMCHA Catalyst CAS107-16-9 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

Jeffcat DMCHA is an N, n-dimethylcyclohexylamine. It is a clear, colorless liquid with a mild odor. Jeffcat DMCHA is used as a catalyst in the production of polyurethane foams. It is compatible with most common polyols and isocyanates.

Physicochemical properties

Properties	value
Appearance	Clear colorless liquid
Scent	Mild, amine-like
pH	11.6
Specific gravity	0.85
Flash point	68 °C (154 °F)
Spontaneous combustion temperature	158 °C (316 °F)
Solubility	Miscible with water, alcohols and ketones
Stable	Stabilize at room temperature

CAS number

107-16-9

Molecular Formula

C8H17N

Molecular weight

143.22 g/mole

Apply

Jeffcat DMCHA is used to catalyze the reaction of polyols and isocyanates to produce polyurethane foam. It is used in a variety of applications, including:

· Rigid foam

· Soft foam

· Spray foam

· Molding foam

· Styrofoam

Precautions for use

Jeffcat DMCHA is a flammable liquid and should be handled with care. It should be stored in a cool, dry place away from heat sources and open flames. Jeffcat DMCHA can irritate the skin and eyes. If it comes into contact with skin or eyes, wash the affected area with soap and water immediately. If inhaled, move to fresh air and seek medical attention if breathing becomes difficult.

See the safety data sheet for more information on Jeffcat DMCHA.

Here are some additional precautions to take when using Jeffcat DMCHA:

· Wear gloves, goggles, and a respirator when handling Jeffcat DMCHA.

· Avoid inhaling vapors or fumes.

· Do not eat or drink while using Jeffcat DMCHA.

· Wash your hands thoroughly after handling Jeffcat DMCHA.

· Dispose of Jeffcat DMCHA properly according to local regulations.

·

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

Jeffcat BDMA catalyst CAS106-97-5 Huntsman

Published by BDMAEE on 2023-07-04 | Permalink

Product Description

Jeffcat BDMA is a 1, 3-bis (dimethylamino) propane catalyst for the production of polyurethane foams. It is a clear, colorless liquid with a mild odor. Jeffcat BDMA is a highly active catalyst that provides a fast curing speed. It is also a low-odor catalyst that is ideal for applications where odor needs to be a concern.

Physicochemical properties

· CAS No. : 106-97-5

· Molecular Formula: C6H14N2

· Molecular weight: 114.21 g/mol

· Density: 0.95 g/cm ³

· Flash point: 102°F (39°C)

· Solubility: miscible with water, alcohol, ketone

Application

Jeffcat BDMA is used to produce a variety of polyurethane foams, including:

· Rigid foams

· Soft foam

· Molding foam

· Paint foam

· elastomer

Strengths

Jeffcat BDMA has a number of advantages over other polyurethane foam catalysts, including:

· Highly active catalysts

· Fast curing

· Low odor catalyst

Precautions for use

Jeffcat BDMA is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If Jeffcat BDMA comes into contact with skin or eyes, wash the affected area with soap and water immediately.

Storage

Jeffcat BDMA should be stored in a cool, dry place. It should be stored in an airtight container to prevent evaporation.

Treatment

Jeffcat BDMA should be disposed of in accordance with local regulations.

The following is a list of the physical and chemical properties of Jeffcat BDMA:

Properties	value
CAS number	106-97-5
Molecular Formula	C6H14N2
Molecular weight	114.21 g/mole
Density	0.95 g/cm ³
Flash point	102 F (39 C)
Solubility	Miscible with water, alcohols and ketones

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT TMPDA catalyst CAS10294-43-5 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

NT CAT TMPDA is a tertiary amine-based foaming catalyst that facilitates urea (water-isocyanate) reactions in a variety of hard and soft polyurethane foam applications. It is the industry standard foaming catalyst for soft foams and is used in TDI-based soft foam systems such as mattresses, seats, and automobiles. It is also used in combination with trimer catalysts in PIR laminated paperboard formulations. NT CAT TMPDA can also be used in MDI, TDI/MDI, MDI High Resilience (HR) soft molded foams as well as self-crusting and microcellular systems. It has a shelf life of 36 months.

CAS No.

The CAS number for NT CAT TMPDA is 10294-43-5. This is a unique identifier for NT CAT TMPDA that is used to track and identify it throughout the supply chain. The CAS number is also used to search databases and other resources for information about NT CAT TMPDA.

Physical and chemical properties

The physical and chemical properties of NT CAT TMPDA are shown in the following table:

Properties	value
Looks	Clear colorless liquid
Scent	A slight ammonia smell
Specific gravity	1.040
Boiling point	200 ℃
Flash point	100 ℃
Water soluble	Miscible
Solubility in organic solvents	miscibility

Features

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· For TDI-based soft foam systems, such as mattresses, seats, and automobiles

· Use in combination with trimer catalysts in PIR laminated cardboard formulations

· Also available in MDI, TDI/MDI, MDI High Resilience (HR) soft molded foams as well as self-crusting and microcellular systems

· The shelf life is 36 months

·

Application

· Soft polyurethane foam

· On-site casting polyurethane system

· PIR laminated cardboard

· TDI, TDI/MDI, MDI High Resilience (HR) Soft molded foam

· Self-crusting foam

· Microcellular foam

Pros

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· Can be used in combination with trimer catalysts

· Shelf life is 36 months

Cons

· Corrosive to certain metals

· Can have a strong odor

· Combustible

Similarities and differences with similar products

NT CAT TMPDA is similar to other tertiary amine-based foaming catalysts in that it promotes the urea (water-isocyanate) reaction. However, it has a number of advantages over other products, including its use in a variety of applications, industry standard status for soft foams, and ability to be combined with trimer catalysts.

Precautions for Use

· Wear gloves and safety goggles when handling NT CAT TMPDA.

· Avoid contact with skin and eyes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT TMEDA catalyst CAS 110-18-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

NT CAT TMEDA is a tertiary amine-based foaming catalyst that facilitates urea (water-isocyanate) reactions in a variety of hard and soft polyurethane foam applications. It is the industry standard foaming catalyst for soft foams and is used in TDI-based soft foam systems such as mattresses, seats and automobiles. It is also used in combination with trimer catalysts in PIR laminated paperboard formulations. NT CAT TMEDA is also available in MDI, TDI/MDI, MDI High Resilience (HR) soft molding foams as well as self-crusting and microcellular systems. It has a shelf life of 36 months.

CAS No.

NT CAT TMEDA’s CAS number is 110-18-9. This is a unique identifier for NT CAT TMEDA that is used to track and identify it throughout the supply chain. CAS numbers are also used to search databases and other resources for information about NT CAT TMEDA.

Physical and chemical properties

The physical and chemical properties of NT CAT TMEDA are shown in the following table:

Property	Value
Looks	Clear colorless liquid
Scent	A slight ammonia smell
Specific gravity	1.040
Boiling point	200 ℃
Flash point	100 ℃
Water soluble	Miscible
Solubility in organic solvents	miscibility

Features

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· For TDI-based soft foam systems, such as mattresses, seats, and automobiles

· Use in combination with trimer catalysts in PIR laminated cardboard formulations

· Also available in MDI, TDI/MDI, MDI High Resilience (HR) soft molded foams as well as self-crusting and microcellular systems

· The shelf life is 36 months

Application

· Soft polyurethane foam

· On-site casting polyurethane system

· PIR laminated cardboard

· TDI, TDI/MDI, MDI High Resilience (HR) Soft molded foam

· Self-crusting foam

· Microcellular foam

Pros

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· Can be used in combination with trimer catalysts

· Shelf life is 36 months

Cons

· Corrosive to certain metals

· Can have a strong odor

· Combustible

Similarities and differences with similar products

NT CAT TMEDA is similar to other tertiary amine-based foaming catalysts in that it promotes the urea (water-isocyanate) reaction. However, it has a number of advantages over other products, including its use in a variety of applications, industry standard status for soft foams, and ability to be combined with trimer catalysts.

Precautions for Use

· Wear gloves and safety goggles when handling the NT CAT TMEDA.

· Avoid contact with skin and eyes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT TMBPA Catalyst CAS68479-98-1 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

NT CAT TMBPA is a balanced polyurethane catalyst mainly used in polyurethane rigid, moulded flexible and semi-rigid foams. NT CAT TMBPA can also be used as a curing agent and accelerator for epoxy resins, as a copper remover for semiconductor materials and as a feedstock for cationic surfactants. The following are details of Polycat 15:

<p class="MsoNormal" style="vertical-align:baseline;”> Overview	<p class="MsoNormal" style="vertical-align:baseline;”> Polyurethane catalysts
<p class="MsoNormal" style="vertical-align:baseline;”> CAS No.	<p class="MsoNormal" style="vertical-align:baseline;”> 68479-98-1
<p class="MsoNormal" style="vertical-align:baseline;”> Synonyms	<p class="MsoNormal" style="vertical-align:baseline;”> N,N,N’,N’-Tetramethyldipropylenetriamine; TMBPA
<p class="MsoNormal" style="vertical-align:baseline;”> Molecular formula	<p class="MsoNormal" style="vertical-align:baseline;”> C12H28N2
<p class="MsoNormal" style="vertical-align:baseline;”> Molecular weight	<p class="MsoNormal" style="vertical-align:baseline;”> 200.37
<p class="MsoNormal" style="vertical-align:baseline;”> Physical and chemical properties	<p class="MsoNormal" style="vertical-align:baseline;”> Please refer to the product manual.
<p class="MsoNormal" style="vertical-align:baseline;”> Precautions for use	<p class="MsoNormal" style="vertical-align:baseline;”> Please refer to the product manual.
<p class="MsoNormal" style="vertical-align:baseline;”> Main uses	<p class="MsoNormal" style="vertical-align:baseline;”> Polyurethane rigid, moulded flexible and semi-rigid foams; epoxy resins as curing agents and accelerators; copper removal agents for semiconductor materials and raw materials for cationic surfactants .

Shelf life.

Keeps unopened, two years

Storage and transportation:

It should be kept in a sealed container and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/Drum Storage: Storage in a dry and cool area with proper ventilation is recommended. Please fasten the lid as soon as possible after original packaging to prevent mixing of other substances such as moisture and other substances that may affect the product performance. Do not breathe dust and avoid contact with skin and mucous membranes. Do not smoke, eat or drink in the workplace. Shower and change clothes after work. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Technical support and business contacts E-mail：sales@newtopchem.com