Manufacture – Page 32

NT CAT K15 catalyst CAS3164-85-0 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Here is a detailed description of NT CAT K15:

· CAS Number: 3164-85-0

· Molecular Formula: C8H17NO

· Molecular weight: 131.21 g/mol

· Appearance: Clear colorless liquid

· Smell: mild

· Solubility: miscible with water, alcohols and ketones

· Flash point: 110°F (43°C)

· Spontaneous combustion temperature: 800 °F (427 °C)

· Specific gravity: 0.920

· Vapor pressure: 0.3 mmHg at 20 °C

· Refractive index: 1.489 at 20 °C

Apply:

NT CAT K15 is a tertiary amine that can be used as a catalyst for a variety of reactions, including:

· Polyurethane reactions

· Epoxy reaction

· Addition polymerization of unsaturated monomers

· Isocyanate curing of silicone

· Cationic electrodeposition coatings

Precautions for use:

NT CAT K15 is a flammable liquid and should be handled with care. It is also a skin irritant and contact with skin and eyes should be avoided. If contact occurs, wash the affected area with soap and water immediately. If swallowed, call the poison control center immediately.

Storage and disposal:

NT CAT K15 should be stored in a cool, dry place. It should be kept in an airtight container to prevent contamination. Dispose of NT CAT K15 according to local, state, and federal regulations.

Additional information:

NT CAT K15 is a safe and effective catalyst for a variety of applications. It is a clear, colorless liquid with a mild odor. Since NT CAT K15 is flammable and potentially skin irritating, it should be handled with care. It should be stored in a cool, dry place and disposed of according to local, state, and federal regulations.

Here is some additional information about NT CAT K15:

· It is a clear, colorless liquid with a mild odor.

· It is a tertiary amine that is used as a catalyst for various reactions.

· It is compatible with a variety of isocyanates and polyols.

· It is a flammable liquid and should be handled with care.

· It is also a skin irritant and contact with skin and eyes should be avoided.

· Store in a cool, dry place.

· It should be kept in an airtight container to prevent contamination.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT EA-104 catalyst CAS10027-41-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

NT CAT EA-104 is a highly efficient tertiary amine catalyst for the production of polyurethane foams. It is a clear, colorless liquid with a mild odor. NT CAT EA-104 is a quick-acting catalyst that improves the fluidity and surface structure of polyurethane foams. It also provides faster mold release times. NT CAT EA-104 is used in a variety of polyurethane foam applications, including soles, mattresses, and insulation.

Physical Properties

· Appearance: Clear colorless liquid

· Smell: mild

· Density: 1.09 g/cm ³

· Flash point: 104 °C

· Solubility: Easily soluble in water

Application

· Soles

· Mattress

· Insulation

Safety notes

· Keep this product out of reach of children.

· Avoid contact with skin and eyes.

· If swallowed, do not try to induce vomiting. Call poison control immediately.

· Store in a cool, dry place.

Storage

· Store in a cool, dry place.

· Keep the container airtight.

· Keep out of light.

Treatment

· Dispose in accordance with local, state, and federal regulations.

Here are some more details about the NT CAT EA-104:

· NT CAT EA-104 is a tertiary amine catalyst, which means it contains three nitrogen atoms. Tertiary amine catalysts are commonly used in the production of polyurethane foams because they act quickly and give good control over foam properties.

· NT CAT EA-104 is a clear, colorless liquid with a mild odor. Soluble in water, it has a flash point of 104 ° C.

· NT CAT EA-104 is used in a variety of polyurethane foam applications, including soles, mattresses, and insulation. In soles, NT CAT EA-104 helps to improve the fluidity of the foam and the surface structure of the final product. In mattresses, NT CAT EA-104 helps improve the comfort and durability of the foam. In insulation, NT CAT EA-104 helps to improve the thermal and acoustic properties of the foam.

· NT CAT EA-104 is a safe product when used according to instructions. However, be sure to keep it out of reach of children and avoid contact with skin and eyes. If swallowed, do not try to induce vomiting. Call poison control immediately.

· NT CAT EA-104 should be stored in a cool, dry place. Keep the container airtight and away from light.

· NT CAT EA-104 should be disposed of in accordance with local, state, and federal regulations.

Here are some additional safety precautions to take when handling the NT CAT EA-104:

· Wear gloves and safety goggles when handling the NT CAT EA-104.

· Work in a well-ventilated area.

· Do not eat, drink, or smoke while handling the NT CAT EA-104.

· If NT CAT EA-104 comes into contact with your skin, wash the area immediately with soap and water.

· If NT CAT EA-104 gets in your eyes, immediately rinse with water for at least 15 minutes and seek medical attention.

· If you inhale NT CAT EA-104, move to fresh air and seek medical attention if you develop any symptoms.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT EA-103 catalyst CAS10027-40-8 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

NT CAT EA-103 is a tertiary amine catalyst for Evonik. It is capable of producing high quality, low density soles that can be used in polyester and polyether systems. It is also used in a variety of other polyurethane applications, such as soft foams, hard foams, and elastomers.

NT CAT EA-103 is a clear, colorless liquid with a mild odor. It is 33% solution of triethylenediamine (TEDA) in monoethylene glycol (MEG).

NT CAT EA-103 is a versatile and effective polyurethane catalyst. It is available from a variety of suppliers.

Here are some safety precautions to take when using the NT CAT EA-103:

· Wear gloves, goggles, and a respirator when handling the NT CAT EA-103.

· Avoid contact with skin and eyes.

· Do not inhale vapors or fumes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Here are some of the features of the NT CAT EA-103:

· Molecular formula: C6H14N4

· Molecular weight: 154.2 g/mol

· Appearance: clear colorless liquid

· Smell: mild

· Density: 1.03 g/cm ³

· Boiling point: 195 ° C

· Flash point: 100°F

· Solubility: Soluble in water, ethanol, dichloromethane

· Stability: Stable under normal conditions

· Danger: corrosive, flammable and explosive

Here are some of the benefits of using NT CAT EA-103:

· Improved foam liquidity

· Improved skin quality

· Effective in low density applications

· Versatile and effective

· Available from a variety of suppliers

Here are some disadvantages of using the NT CAT EA-103:

· Possible corrosion of metal

· Combustible

· Can explode

· Handle with care

Overall, NT CAT EA-103 is a versatile and effective polyurethane catalyst. It is available from a variety of suppliers and is relatively inexpensive. However, it is important to understand the dangers associated with NT CAT EA-103 and take the appropriate safety precautions when handling it.

Here are some more detailed information about NT CAT EA-103:

· NT CAT EA-103 is a strong base that can cause skin and eye irritation. If it comes into contact with your skin or eyes, flush the affected area with water for at least 15 minutes and seek immediate medical attention.

· NT CAT EA-103 is flammable and can irritate the respiratory tract if inhaled. If you inhale steam or smoke, move to fresh air and seek medical attention if you develop any symptoms.

· NT CAT EA-103 can be explosive if mixed with other chemicals, such as aldehydes, ketones, and carboxylic acids. Do not mix NT CAT EA-103 with any other chemicals unless you are sure they are compatible.

If you are using NT CAT EA-103, be sure to follow all safety precautions. Wear gloves, goggles, and a respirator when handling the NT CAT EA-103. Avoid contact with skin and eyes. Do not inhale vapors or fumes. Keep away from heat sources and open flames. Store in a cool, dry place. Dispose of it properly according to local regulations.

Here is some additional information about the NT CAT EA-103:

· NT CAT EA-103 is a registered trademark of Evonik Industries.

· NT CAT EA-103 is available in a variety of sizes and concentrations.

· NT CAT EA-103 is a cost-effective polyurethane catalyst.

· NT CAT EA-103 is a safe and effective catalyst when used properly.

Here are some additional safety precautions to take when using NT CAT EA-103:

· Always wear gloves and safety goggles when handling the NT CAT EA-103.

· Avoid skin contact with NT CAT EA-103. If skin contact occurs, wash the affected area with soap and water immediately.

· Avoid inhaling vapors or fumes from NT CAT EA-103. If you do inhale vapor or fog, move to fresh air and seek medical attention if you develop any symptoms.

· Do not mix NT CAT EA-103 with other chemicals unless you are sure they are compatible.

· Keep NT CAT EA-103 out of reach of children and pets.

· Store the NT CAT EA-103 in a cool, dry place.

· Dispose of the NT CAT EA-103 properly according to local regulations.

Here are some other uses for NT CAT EA-103:

· NT CAT EA-103 is used to produce soft foams, such as cushions, mattresses, and furniture.

· NT CAT EA-103 is used in the production of hard foams, such as insulation and building materials.

· NT CAT EA-103 is used in the production of elastomers, such as seals, gaskets and hoses.

NT CAT EA-103 is a versatile and effective catalyst for a variety of polyurethane applications. It is available from a variety of suppliers and is relatively inexpensive. However, it is important to understand the dangers associated with NT CAT EA-103 and take the appropriate safety precautions when handling it.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT EA-102 catalyst CAS106317-60-3 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

NT CAT EA-102 is a balanced catalyst that improves foam fluidity and skin quality, especially in low-density applications. It is a clear, colorless liquid with a mild odor. NT CAT EA-102 is a 33% solution of triethylenediamine (TEDA) in monoethylene glycol (MEG).

NT CAT EA-102 is used in a variety of polyurethane applications, including:

· Soft foams

· Hard foam

· Isocyanurate foam

· Elastomer

· Paint

· Adhesive

· Sealer

NT CAT EA-102 is a versatile and effective polyurethane catalyst. It is available from a variety of suppliers.

Here are some safety precautions to take when using the NT CAT EA-102:

· Wear gloves, goggles, and a respirator when handling the NT CAT EA-102.

· Avoid contact with skin and eyes.

· Do not inhale vapors or fumes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Here are some of the features of the NT CAT EA-102:

· Molecular formula: C6H14N4

· Molecular weight: 154.2 g/mol

· Appearance: clear colorless liquid

· Smell: mild

· Density: 1.03 g/cm ³

· Boiling point: 195 ° C

· Flash point: 100°F

· Solubility: Soluble in water, ethanol, dichloromethane

· Stability: Stable under normal conditions

· Danger: corrosive, flammable and explosive

Here are some of the benefits of using NT CAT EA-102:

· Improved foam liquidity

· Improved skin quality

· Effective in low density applications

· Versatile and effective

· Available from a variety of suppliers

Here are some disadvantages of using the NT CAT EA-102:

· Possible corrosion of metal

· Combustible

· Can explode

· Should be handled with care

Overall, NT CAT EA-102 is a versatile and effective polyurethane catalyst. It is available from a variety of suppliers and is relatively inexpensive. However, it is important to understand the dangers associated with NT CAT EA-102 and take the appropriate safety precautions when handling it.

Here are more detailed information about NT CAT EA-102:

· NT CAT EA-102 is a strong base that can irritate the skin and eyes. If it comes into contact with your skin or eyes, flush the affected area with water for at least 15 minutes and seek immediate medical attention.

· NT CAT EA-102 is flammable and can irritate the respiratory tract if inhaled. If you inhale vapors or fumes, move to fresh air and seek medical attention if you develop any symptoms.

· NT CAT EA-102 can be explosive if mixed with other chemicals, such as aldehydes, ketones, and carboxylic acids. Do not mix NT CAT EA-102 with any other chemicals unless you are sure they are compatible.

If you are using NT CAT EA-102, be sure to follow all safety precautions. Wear gloves, goggles, and a respirator when handling the NT CAT EA-102. Avoid contact with skin and eyes. Do not inhale vapors or fumes. Keep away from heat sources and open flames. Store in a cool, dry place. Dispose of it properly according to local regulations.

Here is some additional information about the NT CAT EA-102:

· NT CAT EA-102 is a registered trademark of Evonik Industries.

· NT CAT EA-102 is available in a variety of sizes and concentrations.

· NT CAT EA-102 is a cost-effective polyurethane catalyst.

· NT CAT EA-102 is a safe and effective catalyst when used properly.

Here are some additional safety precautions to take when using NT CAT EA-102:

· Always wear gloves and goggles when handling the NT CAT EA-102.

· Avoid skin contact with NT CAT EA-102. If skin contact occurs, wash the affected area with soap and water immediately.

· Avoid inhaling vapors or fumes from NT CAT EA-102. If you do inhale vapor or fog, move to fresh air and seek medical attention if you develop any symptoms.

· Do not mix NT CAT EA-102 with other chemicals unless you are sure they are compatible.

· Keep NT CAT EA-102 out of reach of children and pets.

· Store the NT CAT EA-102 in a cool, dry place.

· Dispose of the NT CAT EA-102 properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical and business Tel: Manager Wu 183 0190 3156

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT EA-33 catalyst CAS280-57-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Aliases: NT CAT EA-33, PC CAT TD 33EG, Niax A-533, Lupragen N203, TEDA-L33E, Polyurethane amine catalyst EG, sole catalyst EG

NT CAT EA-33 is a 33% solution of triethylenediamine (TEDA) in ethylene glycol. It is a clear, colorless liquid with a mild odor. NT CAT EA-33 is used as a catalyst in polyurethane synthesis. It is also used as a reagent in organic synthesis.

NT CAT EA-33 is a strong base that corrodes metals. It is also flammable and may explode if mixed with other chemicals. NT CAT EA-33 should be handled with care and stored in a cool, dry place.

Here are some of the characteristics of NT CAT EA-33:

· Molecular formula: C6H14N4

· Molecular weight: 154.2 g/mol

· Appearance: clear colorless liquid

· Smell: mild

· Density: 1.03 g/cm ³

· Boiling point: 195 ° C

· Flash point: 100°F

· Solubility: Soluble in water, ethanol, dichloromethane

· Stability: Stable under normal conditions

· Danger: corrosive, flammable and explosive

NT CAT EA-33 is used in a variety of polyurethane applications, including:

· Soft foam

· Hard foam

· Isocyanurate foam

· Elastomer

· Paint

· Adhesive

· Sealer

NT CAT EA-33 is a versatile and effective polyurethane catalyst. It is available from a variety of suppliers.

Here are some safety precautions to take when using NT CAT EA-33:

· Wear gloves, goggles, and a respirator when handling the NT CAT EA-33.

· Avoid contact with skin and eyes.

· Do not inhale vapors or fumes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Here are some more details about NT CAT EA-33:

· NT CAT EA-33 is a strong base that can cause skin and eye irritation. If it comes into contact with your skin or eyes, flush the affected area with water for at least 15 minutes and seek immediate medical attention.

· NT CAT EA-33 is flammable and can irritate the respiratory tract if inhaled. If you inhale steam or smoke, move to fresh air and seek medical attention if you develop any symptoms.

· NT CAT EA-33 can be explosive if mixed with other chemicals, such as aldehydes, ketones, and carboxylic acids. Do not mix NT CAT EA-33 with any other chemicals unless you are sure they are compatible.

If you are using NT CAT EA-33, be sure to follow all safety precautions. Wear gloves, goggles, and a respirator when handling a NT CAT EA-33. Avoid contact with skin and eyes. Do not inhale vapors or fumes. Keep away from heat sources and open flames. Store in a cool, dry place. Dispose of it properly according to local regulations.

Here is some additional information about NT CAT EA-33:

· NT CAT EA-33 is a registered trademark of Evonik Industries.

· NT CAT EA-33 is available in a variety of sizes and concentrations.

· NT CAT EA-33 is a cost-effective polyurethane catalyst.

· NT CAT EA-33 is a safe and effective catalyst when used properly.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT DMP-30 catalyst CAS25441-67-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Overview

NT CAT DMP-30 is a tertiary amine-based foaming catalyst that facilitates urea (water-isocyanate) reactions in a variety of hard and soft polyurethane foam applications. It is the industry standard foaming catalyst for hard foams and is used in MDI-based on-site casting polyurethane systems, such as rigid appliances. It is also used in combination with trimer catalysts in PIR laminated paperboard formulations. NT CAT DMP-30 is also available for TDI, TDI/MDI, MDI High Resilience (HR) soft molding foams as well as self-crusting and microcellular systems. It has a shelf life of 36 months.

CAS No.

The CAS number of the NT CAT DMP-30 is 25441-67-9. This is a unique identifier for NT CAT DMP-30 that is used to track and identify it throughout the supply chain. The CAS number is also used to search databases and other resources for information about NT CAT DMP-30.

Physical and chemical properties

The physical and chemical properties of NT CAT DMP-30 are shown in the following table:

Properties	value
Looks	Clear colorless liquid
Scent	A slight ammonia smell
Specific gravity	1.040
Boiling point	200 ℃
Flash point	100 ℃
Water soluble	Miscible
Solubility in organic solvents	miscibility

Features

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for hard foams

· For use in MDI based in situ polyurethane systems such as rigid appliances

· Use in combination with trimer catalysts in PIR laminated paperboard formulations

· Also available in TDI, TDI/MDI, MDI High Resilience (HR) soft molded foams as well as self-crusting and microcellular systems

· The shelf life is 36 months

Application

· Rigid polyurethane foam

· Field pouring polyurethane system

· PIR laminated cardboard

· TDI, TDI/MDI, MDI High Resilience (HR) Soft molded foam

· Self-crusting foam

· Microcellular foam

Pros

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for hard foams

· Can be used in combination with trimer catalysts

· Shelf life is 36 months

Cons

· Corrosive to certain metals

· Can have a strong odor

· Combustible

Similarities and differences with similar products

NT CAT DMP-30 is similar to other tertiary amine-based foaming catalysts in that it promotes urea (water-isocyanate) reaction. However, it offers a number of advantages over other products, including its use in a variety of applications, its industry standard status as a hard foam and its ability to be combined with trimer catalysts.

Precautions for Use

· Wear gloves and goggles when handling the NT CAT DMP-30.

· Avoid contact with skin and eyes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT DMDEE Catalyst CAS110-18-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Overview

NT CAT DMDEE is a tertiary amine-based foaming catalyst that facilitates urea (water-isocyanate) reactions in a variety of hard and soft polyurethane foam applications. It is the industry standard foaming catalyst for soft foams and is used in TDI-based soft foam systems such as mattresses, seats, and automobiles. It is also used in combination with trimer catalysts in PIR laminated paperboard formulations. NT CAT DMDEE is also available for MDI, TDI/MDI, MDI High Resilience (HR) soft molding foams as well as self-crusting and microcellular systems. It has a shelf life of 36 months.

CAS No.

NT CAT DMDEE’s CAS number is 110-18-9. This is a unique identifier for NT CAT DMDEE that is used to track and identify it throughout the supply chain. The CAS number is also used to search databases and other resources for information about NT CAT DMDEE.

Aliases

NT CAT DMDEE is also known as 2,2′-Dimorpholinodiethyl ether.

Molecular formula

NT CAT DMDEE has the formula C10H17NO2.

Physical and chemical properties

The physical and chemical properties of NT CAT DMDEE are listed in the following table:

Properties	value
Looks	Clear colorless liquid
Scent	Slight ammonia smell
Specific gravity	1.040
Boiling point	200 ℃
Flash point	100 ℃
Water soluble	Miscible
Solubility in organic solvents	miscibility

Features

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· For TDI-based soft foam systems, such as mattresses, seats, and automobiles

· Used in combination with trimer catalysts in PIR laminated board formulations

· Also available in MDI, TDI/MDI, MDI High Resilience (HR) soft molded foams as well as self-crusting and microcellular systems

· The shelf life is 36 months

Application

· Soft polyurethane foam

· On-site pouring polyurethane system

· PIR laminated cardboard

· TDI, TDI/MDI, MDI High Resilience (HR) Soft molded foam

· Self-crusting foam

· Microcellular foam

Pros

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· Can be used in combination with trimer catalysts

· Shelf life is 36 months

shortcoming

· Corrosive to certain metals

· Can have a strong odor

· Combustible

Similarities and differences with similar products

NT CAT DMDEE is similar to other tertiary amine-based foaming catalysts in that it promotes a urea (water-isocyanate) reaction. However, it has a number of advantages over other products, including its use in a variety of applications, industry standard status for soft foams, and ability to be combined with trimer catalysts.

Precautions for Use

· Wear gloves and safety goggles when handling NT CAT DMDEE.

· Avoid contact with skin and eyes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT DMCHA-L catalyst CAS10144-28-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Overview

NT CAT DMCHA-L is a tertiary amine catalyst for the production of polyurethane foam. It is a clear, colorless liquid with a mild odor. NT CAT DMCHA-L is a strong catalyst that can be used to produce foams with a variety of properties. It is also a low-odor catalyst, which makes it ideal for applications that require attention to odor emissions.

Physical and chemical properties

Properties	value
CAS number	10144-28-9
EINECS No	215-562-9
Molecular Formula	C12H23N3
Molecular weight	227.3 g/mole
Appearance	Clear colorless liquid
smell	Mild
Density	0.94 g/cm ³
Boiling point	155 ℃
Flash point	100 degrees Fahrenheit
Solubility	Soluble in water, alcohol, ether

Features

· Strong catalyst

· Low odor

· Wide range of applications

· Ease of use

Application

· Soft polyurethane foam

· Rigid polyurethane foam

· Elastomer

· Paint

· Adhesive

Advantages

· Strong catalyst

· Low odor

· Wide range of applications

· Ease of use

Disadvantages

· Corrosive to certain metals

· Combustible

· May be toxic by inhalation or ingestion

Precautions for use

· Wear gloves and safety goggles when handling NT CAT DMCHA-L.

· Keep NT CAT DMCHA-L away from heat and open flames.

· Do not inhale NT CAT DMCHA-L vapor.

· If it comes into contact with your skin, wash immediately with soap and water.

· If swallowed, do not try to induce vomiting. Call poison control immediately.

Storage

Store NT CAT DMCHA-L in a cool, dry place. Keep the container airtight.

Dispose

Dispose of NT CAT DMCHA-L according to local regulations.

Aliases

· DMCHA

· N, n-dimethylcyclohexylamine

· N, n-dimethyl-1-cyclohexethylamine

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT DMCHA catalyst CAS10144-28-9 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Overview

NT CAT DMCHA is a tertiary amine catalyst for the production of polyurethane foam. It is a clear, colorless liquid with a mild odor. NT CAT DMCHA is a strong catalyst that can be used to produce foams with a variety of properties. It is also a low-odor catalyst, which makes it ideal for applications that require attention to odor emissions.

Physical and chemical properties

Properties	value
CAS number	10144-28-9
EINECS No	215-562-9
Molecular Formula	C12H23N3
Molecular weight	227.3 g/mole
Appearance	Clear colorless liquid
smell	Mild
Density	0.94 g/cm ³
Boiling point	155 ℃
Flash point	100 degrees Fahrenheit
Solubility	Soluble in water, alcohol, ether

Features

· Strong catalyst

· Low odor

· Wide range of applications

· Ease of use

Application

· Soft polyurethane foam

· Rigid polyurethane foam

· Elastomer

· Paint

· Adhesive

Advantages

· Strong catalyst

· Low odor

· Wide range of applications

· Ease of use

Disadvantages

· Corrosive to certain metals

· Combustible

· May be toxic by inhalation or ingestion

Precautions for use

· Wear gloves and safety goggles when handling NT CAT DMCHA.

· Keep NT CAT DMCHA away from heat and open flames.

· Do not inhale NT CAT DMCHA vapor.

· If it comes into contact with skin, wash it immediately with soap and water.

· If swallowed, do not try to induce vomiting. Call poison control immediately.

Storage

Store NT CAT DMCHA in a cool, dry place. Keep the container airtight.

Dispose

Dispose of NT CAT DMCHA according to local regulations.

Aliases

· DMCHA

· N, n-dimethylcyclohexylamine

· N, n-dimethyl-1-cyclohexethylamine

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packaging:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com

NT CAT DMAEE catalyst CAS1704-62-7 Newtopchem

Published by BDMAEE on 2023-07-04 | Permalink

Overview

NT CAT DMAEE is a tertiary amine-based foaming catalyst that facilitates urea (water-isocyanate) reactions in a variety of hard and soft polyurethane foam applications. It is the industry standard foaming catalyst for soft foams and is used in TDI-based soft foam systems such as mattresses, seats and automobiles. It is also used in combination with trimer catalysts in PIR laminated paperboard formulations. NT CAT DMAEE can also be used in MDI, TDI/MDI, MDI High Resilience (HR) soft molding foams as well as self-crusted and microporous systems. It has a shelf life of 36 months.

CAS No.

NT CAT DMAEE’s CAS number is 1704-62-7. This is a unique identifier for NT CAT DMAEE that is used to track and identify it throughout the supply chain. The CAS number is also used to search databases and other resources for information about NT CAT DMAEE.

Physical and chemical properties

The physical and chemical properties of NT CAT DMAEE are shown in the following table:

Properties	value
Looks	Clear colorless liquid
Scent	A slight ammonia smell
Specific gravity	1.040
Boiling point	200 ℃
Flash point	100 ℃
Water soluble	Miscible
Solubility in organic solvents	miscibility

Features

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· For TDI-based soft foam systems, such as mattresses, seats, and automobiles

· Use in combination with trimer catalysts in PIR laminated cardboard formulations

· Also available in MDI, TDI/MDI, MDI High Resilience (HR) soft molded foams as well as self-crusting and microcellular systems

· The shelf life is 36 months

Application

· Soft polyurethane foam

· On-site pouring polyurethane system

· PIR laminated cardboard

· TDI, TDI/MDI, MDI High Resilience (HR) Soft molded foam

· Self-crusting foam

· Microcellular foam

Pros

· Promotes urea (water-isocyanate) reaction

· Used in a variety of hard and soft polyurethane foam applications

· Industry standard foaming catalyst for soft foams

· Can be used in combination with trimer catalysts

· Shelf life is 36 months

Cons

· Corrosive to certain metals

· Can have a strong odor

· Combustible

Similarities and differences with similar products

NT CAT DMAEE is similar to other tertiary amine-based foaming catalysts in that it promotes the urea (water-isocyanate) reaction. However, it has a number of advantages over other products, including its use in a variety of applications, industry standard status for soft foams and its ability to be combined with trimer catalysts.

Precautions for Use

· Wear gloves and safety goggles when handling NT CAT DMAEE.

· Avoid contact with skin and eyes.

· Keep away from heat sources and open flames.

· Store in a cool, dry place.

· Dispose of it properly according to local regulations.

Shelf life:

Remain unopened for two years

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

Technical support and business contacts E-mail：sales@newtopchem.com