Evonik TEGO Foamex 810 defoaming agent concentrate
Products Description
TEGO Foamex 810 defoamer concentrate, general application first half defoamer , used in the lower half can effectively eliminate microbubbles.
Application Suggestions
|
Brush application/roller application |
4 |
|
Airless spray |
4 |
|
Compressed air spray |
5 |
|
Letterpress/gravure printing |
5 |
|
Dip coating, flow coating, shower coating |
3 |
|
Floor bed |
3 |
Note: 0=not applicable 5=highly applicable
Suitable Sex
|
Project |
Typical data |
|
Water-based |
Suitable |
|
Solvent-based |
Generally suitable |
|
Two-liquid type 100% |
Discomfort� |
|
Radiation Curing |
Generally suitable |
|
Transparent paint |
Generally suitable |
|
Pigmented |
Suitable |
Add At
|
Grinding section |
Suitable |
|
Second half |
Generally suitable |
Solubility
|
Project |
Typical data |
|
Water |
Insoluble |
|
Ethanol |
turbid but stable |
|
Tripropylene glycol diacrylate (TPGDA) |
Clear and soluble |
|
Butyl acetate |
turbid but stable |
|
Petroleum solvent |
Clear and soluble |
Suggestions Adding amount
Calculated based on the original product and the total formula: 0.05-0.5%
Use Description
Especially suitable for grinding
High shear force or pre-thinning is required when added to the lower half or varnish
The long-term effectiveness of defoaming agents is formulation dependent and should be tested in individual formulations (Recommended at different temperatures)
Recipe Suggestions
Stronger efficacy alternatives: TEGO Foamax 883, TEGO Foamax 842, better compatibility Capacitive alternatives: TEGO Foamax 860, TEGO Foamax 830
Chemistry Structure
Polyethersiloxane copolymer, oxygen-containing silica
Technology Parameters
|
Project |
Typical data |
|
Appearance |
Slightly turbid liquid |
|
Active ingredients |
100% |
Contact Suitability of food
Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6
Detailed BfR and 10/2011 status information available on request
Save Security
When stored in original unopened packaging, between -40 and +40℃ time, the storage period of this product is at least 36 months from the date of manufacture.
ong> Recommended amount
Calculated based on the original product and the total formula: 0.05-0.5%
Use Description
Especially suitable for grinding
High shear force or pre-thinning is required when added to the lower half or varnish
The long-term effectiveness of defoaming agents is formulation dependent and should be tested in individual formulations (Recommended at different temperatures)
Recipe Suggestions
Stronger efficacy alternatives: TEGO Foamax 883, TEGO Foamax 842, better compatibility Capacitive alternatives: TEGO Foamax 860, TEGO Foamax 830
Chemistry Structure
Polyethersiloxane copolymer, oxygen-containing silica
Technology Parameters
|
Project |
Typical data |
|
Appearance |
Slightly turbid liquid |
|
Active ingredients |
100% |
Contact Suitability of food
Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6
Detailed BfR and 10/2011 status information available on request
Save Security
When stored in original unopened packaging, between -40 and +40℃ time, the storage period of this product is at least 36 months from the date of manufacture.
