BDMAEE

The large and growing family of JEFFCAT amine catalysts from Huntsman Performance Products provides solutions to a wide range of urethane applications including polyether and polyester foams, coatings, elastomers, and high-modulus urethane plastics. The unique industry-leading low emission JEFFCAT amine catalyst product range results from the value of Huntsman’s advanced technologies and 40-plus years of experience with urethane catalysts and addresses the environmental, health and safety aspects of polyurethane foam production and usage in many application area including automotive, furniture & bedding and spray foams.

GENERAL PURPOSE CATALYSTS

Jeffcat ZF-20   Bis-(2-dimethylaminoethyl)ether : A very strong, highly efficient blowing catalyst.

Jeffcat  ZF-22   70% ZF-20 in dipropylene glycol

Jeffcat  ZF-24     23% ZF-20 in dipropylene glycol

Jeffcat  ZF-26       11% ZF-20 in dipropylene glycol

Jeffcat  ZF-123       35% ZF-20 in a 3000 MW triol

Jeffcat  ZF-125         35% ZF-20 in a high viscosity reactive diluent

Jeffcat  ZF-167         47% ZF-20 in dipropylene glycol

Jeffcat  ZF-234

Jeffcat  ZF-54   Delayed-action catalyst made up of ZF-22 partially neutralized with formic acid. Provides excellent cure and flow as co-catalyst.

Jeffcat BDMA     Benzyldimethylamine

Jeffcat DMCHA   N,N-dimethylcyclohexylamine Widely used catalyst for all types of rigid foams.

Jeffcat DMEA         N,N-dimethylethanolamine

Jeffcat PMDETA     Pentamethyldiethylenetriamine : Especially useful as catalyst for HCFC/ water-blown rigid foams.

Jeffcat  TD-33A       33% TEDA in dipropylene glycol

Jeffcat  TDBDO       25% TD-100 in 75% 1,4-butanediol (BDO)

Jeffcat  TDEG              33.3% TD-100 in monoethylene glycol

Jeffcat  Z-80       N,N,N, -tris(3-dimethylaminopropyl-) amine : It acts as a low odor gel catalyst, designed mainly for use in rigid polyurethane foams.

Jeffcat  Z-140       Low odor balanced catalyst with excellent postcure characteristics.

Jeffcat ZR-40       N,N,N’,N”,N”-pentamethyl-dipropylenetriamine : Very useful in cold-molded HR foams. Low odor catalyst with a good balance between gel and blow.

LOW EMISSION CATALYSTS / REACTIVE CATALYSTS

Jeffcat  DMAPA    Used in a variety of polyurethane foam applications.

Jeffcat  DPA         Low emission catalyst with good gelation and flowability.

Jeffcat  LE-15   This is reactive amine catalyst blend. This product strongly promotes the blowing reaction and is formulated to permit its easy introduction into polyurethane foam formulations.

Jeffcat  LE-60   Reactive blowing catalyst used in foams requiring low emissions.

Jeffcat  LE-220 High potency, low odor gel catalyst designed to replace JEFFCAT  TD-33A. Used in a wide variety of flexible and rigid PU formulations with excellent processing latitude.

Jeffcat  LE-310 Low emission gel catalyst which can replace JEFFCAT TD-33A on an equivalent part basis. Can be used in a wide variety of flexible slabstock and high resiliency (HR) foam grades.

Jeffcat LE-425     Formulated blend of reactive blowing and gelling catalysts.

Jeffcat LE-520

Jeffcat  LE-526

Jeffcat  LED-103   Reactive, acid blocked, low emissions type blowing catalyst that offers improved material handling, low-corrosion, and phase stability in fully formulated B-side flexible molded foams.

Jeffcat  LED-204   Reactive, acid blocked, low emissions, low-corrosion type gelling catalyst used in all types of flexible molded foams.

Jeffcat  S-117           Thisis a formulated strong blowing catalyst for low- and medium-density spray foams. The product is a non-fugitive catalyst because it contains reactive hydroxyl groups which react into the foaming matrix, thus minimizing catalyst odor in finished foams.

Jeffcat  Z-110       Used in a variety of polyurethane foam applications.

Jeffcat  Z-130     Low emission reactive gel catalyst.

Jeffcat  Z-131     Blend of low emission, reactive gelling amine catalysts.

Jeffcat  ZF-10   Strong blowing catalyst that is highly efficient. Used in foams requiring low emission.

Jeffcat  ZR-50   Low emission catalyst with exceptional balance and versatility.

Jeffcat  ZR-70    For use mainly in spray and packaging foam applications.

FLEXIBLE POLYESTER FOAM CATALYSTS

Jeffcat  NEM   N-ethylmorpholine — Promotes surface cure for  flexiblepolyester foams and excellent processing in polyester-based flexible foams.

Jeffcat  NMM  N-methylmorpholine — Good solubilizer in making  polyester foams. Also useful in high rise rigid molded applications.

Jeffcat MM-70   Reduced odor amine to replace JEFFCAT NEM in flexible ester foams.

Jeffcat PM           Low odor JEFFCAT NEM replacement for round block flexible ester bun  stock foam.

Jeffcat M-75         Reduced odor formulated catalyst that gives excellent processing latitude in  polyester-based flexible foams and clear activator solutions.

Jeffcat DM-70         Improves green strength and can be used for charcoal polyester-based flexible foams.

SPECIALTY AMINE CATALYSTS

Jeffcat  DMDEE     2,2′-dimorpholinodiethylether — Strong blowing  catalyst. Provides a stable prepolymer system. Excellent for 1-K systems.

Jeffcat   DMDLC     Used for 1-K moisture cure applications with critical color requirements.

Jeffcat  ZF-53       Formulated catalyst made from TD-33A and ZF-22. Designed for flexible  slab foams.

Jeffcat   ZF-54         Delayed-action catalyst made up of ZF-22 partially neutralized with formic acid.  Provides excellent cure and flow as co-catalyst.

Jeffcat Z-65P         Formulated catalyst for accelerated cure in a medium mw diol (PPG-400). Improves early compression set. Wide processing latitude with alternate blowing agent.

Jeffcat  ZR-81           Delayed action balanced catalyst used to extend process equipment    service times.

BACK-END CURE CATALYSTS

Jeffcat TR-52      Back-end cure co-catalyst. Shortens the demold time of rigid foam systems.

Jeffcat TR-90      1,3,5-tris(3-(dimethylamino)propyl)- hexahydro-   s-triazine — Improved dimensional stability in many rigid foam systems. Useful as a cocatalyst in rigid spray foam.