4-Dimethylaniline

2,4-Dimethylaniline

Published by BDMAEE on 2024-05-09 | Permalink

2,4-dimethylaniline structural formula

Structural formula

Business number	029K
Molecular formula	C8H11N
Molecular weight	121.18
label	m-dimethylaniline, 2,4-Dimethyl-Benzenemine, 2,4-Dimethylaniline, m-Xylidine

Numbering system

CAS number:95-68-1

MDL number:MFCD00007738

EINECS number:202-440-0

RTECS number:ZE8925000

BRN number:636243

PubChem number:24854443

Physical property data

1. Properties: colorless oily liquid ^[1]

2. Melting point (℃): -14.3^[2]

3. Boiling point (℃): 214^[3]

4. Relative density (water=1): 0.97^[4]

5. Relative vapor density (air=1): 4.18^[5]

6. Saturated vapor pressure (kPa ): 0.05 (38℃)^[6]

7. Octanol/water partition coefficient: 1.68^[7]

8. Flash point (℃): 90.56^[8]

9. Ignition temperature (℃): 460^[9]

10. Explosion upper limit (%): 7.0^[10]

11. Explosion lower limit (%): 1.1^[11]

12. Solubility: Slightly soluble in water, soluble in ethanol, ether, benzene and other organic solvents. ^[12]

Toxicological data

1. Acute toxicity:

Oral LD50 in rats: 467mg/kg; Oral LD50 in mice: 250mg/kg; Inhalation LC50 in mice: 149ppm/7H;

2. Other multiple dose toxicity: rat oral TDLo: 1170mg/kg/10D-C; rat oral TDLo: 13300mg/kg/4W-I;

3. Mutagenicity

Mutation of microbial Salmonella typhimurium: 1μmol/plate;

DNA synthesis in rat liver: 1μmol/L;

Transperitoneal DNA damage in mice: 200mg /kg;

Oral DNA inhibition in mice: 200mg/kg;

4. Acute toxicity^[13]

LD50: 467mg/kg (rat oral)

LC50: 149ppm (mouse inhalation, 7h)

5. Irritation No data yet

6. Subacute and chronic toxicity ^[14] Rat intragastric doses are 25, 50, 100 and 250mg /kg for 7 consecutive days, liver weight increased. The dose is 400mg/kg, 7 days, and the liver weight is seriously damaged.

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability^[15] In air, when the concentration of hydroxyl radicals is 5.00×10⁵/cm³ When, the degradation half-life is 2h (theoretical).

4. Other harmful effects ^[16] This substance is harmful to the environment, and special attention should be paid to the pollution of water bodies.

Molecular structure data

1. Molar refractive index: 40.13

2. Molar volume (cm³/mol): 124.2

3. Isotonic specific volume (90.2K ): 308.3

4. Surface tension (dyne/cm): 37.9

5. Polarizability (10-24cm3): 15.91

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: none

6. Topological molecule polar surface area 26

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 90.6

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability^[17] Stable

2. Incompatible substances^[18] Acids, acid chlorides, acid anhydrides, strong oxidants, chloroform, halogens

3. Conditions to avoid contact^[19] Heating

4. Hazards of aggregation^[20] No aggregation

Storage method

Storage Precautions^[21] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Keep container tightly sealed. They should be stored separately from oxidants, acids, halogens, and food chemicals, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Prepared from m-xylene through nitration and reduction.

Purpose

1. Used as analytical reagents to produce dyes. ^[22]

3,4-Dimethylaniline

Published by BDMAEE on 2024-05-08 | Permalink

3,4-dimethylaniline structural formula

Structural formula

Business number	029G
Molecular formula	C8H11N
Molecular weight	121
label	4-amino-o-xylene, 1-amino-3,4-dimethylbenzene, 4-Amino-o-xylene, 3,4-Dimethylaniline, 1-Amino-3,4-dimethylbenzene, Aromatic nitrogen-containing compounds and their derivatives

Numbering system

CAS number:95-64-7

MDL number:MFCD00007810

EINECS number:202-437-4

RTECS number:ZE9450000

BRN number:507414

PubChem number:24847724

Physical property data

1. Properties: The pure product is flake or columnar crystal, colorless to light reddish brown oily liquid.

2. Density (g/mL, 18℃): 1.076

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 49~51

5. Boiling point (ºC, normal pressure): 226

6. Boiling point (ºC, kPa): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): 98

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V) : Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Slightly soluble in water, chloroform, soluble in petroleum ether, ether, alcohol.

Toxicological data

1. Acute toxicity: rat oral LD50: 812mg/kg; mouse oral LD50: 707mg/kg; wild bird oral LD50: 5600μg/kg;

2. Mutagenicity Properties: Microbial Salmonella Typhimurium Mutations: 5 μmol/plate.

Ecological data

COD (Chemical Oxygen Demand): 30 This substance is harmful to the environment. Special attention should be paid to the pollution of water bodies. Since it is alkaline, special attention should be paid to plants. Special attention should also be paid to vegetables, soil and water organisms.

Molecular structure data

1. Molar refractive index: 40.13

2. Molar volume (cm³/mol): 124.2

3. Isotonic specific volume (90.2K ): 308.3

4. Surface tension (dyne/cm): 37.9

5. Polarizability (10-24cm3): 15.91

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: none

6. Topological molecule polar surface area 26

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 90.6

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with strong oxidants, strong acids, acid anhydrides, acid chlorides, and halogens.

2. The oral LD50 of this product in mice is 707~812mg/kg. Oral ingestion and skin inhalation can cause poisoning.

3. Found in oriental tobacco leaves.

4. Highly toxic!

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Protect from direct sunlight. The packaging is sealed. They should be stored separately from oxidants, acids, acid anhydrides, acid chlorides, and halogens, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. Suitable materials should be available in the storage area to contain spills. Packed in 50kg iron drum. Store in a cool, ventilated warehouse, away from fire and heat sources, and away from direct sunlight. Store and transport separately from edible raw materials.

Synthesis method

1. 2-Chloromethyl-4-nitrotoluene is produced by chloromethylation of p-nitrotoluene with dichloromethyl ether, with a yield of 95%; then catalyze it with a nickel catalyst, and heat it at 35-30°C , hydrogenation at 3.5-4MPa produces 3,4-dimethylaniline. Another method is to use 3,4-dimethylacetophenone as raw material. It reacts with hydroxylamine hydrochloride and polyphosphoric acid successively, and finally hydrolyzes to obtain 3,4-dimethylaniline.

2. The preparation method is as follows It is produced by chloromethylation of p-nitrotoluene as raw material, followed by hydrogenation, reduction and dechlorination. Add dichloromethyl ether, p-nitrotoluene, and chlorosulfonic acid into the reaction kettle, stir and react at 15 to 20°C, then hydrolyze, filter, and wash the filter cake to obtain 2-chloromethyl-4-nitrotoluene. Dissolve 2-chloromethyl-4-nitrotoluene in ethanol and add nickel to the reactor. First, nitrogen gas is introduced to replace the air in the reactor, and then hydrogen gas is introduced. Control the temperature to 35-50°C and the pressure to 3.4-3.9 MPa. After the hydrogen is completed, ethanol is recovered by distillation, sodium hydroxide is added to alkalize, and the finished product is obtained by steam distillation.
3,4-dimethylaniline can also be prepared from o-xylene and starting materials.
Dissolve o-xylene in carbon disulfide, add anhydrous aluminum trichloride as a catalyst, and then add acetyl chloride dropwise. After the dropwise addition, react at 90°C for 30 minutes, then add hydrochloric acid, pour into ice water, and divide The aqueous solution was extracted with diethyl ether. The extract was washed with water, dried, evaporated to remove the diethyl ether, and distilled under reduced pressure to obtain 3,4-dimethylacetophenone. Then add 3,4-dimethylacetophenone to the mixture of hydroxylamine hydrochloride, water, potassium acetate, and methanol at a temperature of 40°C, then reflux in a water bath for 2 hours, pour into water, stir, cool, and precipitate Crystallize, filter, wash with water, and recrystallize with petroleum ether to obtain 2-(3,4-dimethylphenyl)acetoxime. Then heat the oximide and polyphosphoric acid in a water bath for 5 to 10 minutes to start to exotherm. Keep it at 120°C for 15 minutes. Recrystallize it from dilute ethanol to obtain acetyl 3,4-dimethylaniline. Then reflux with sulfuric acid and ethanol for 1.5 hours. Concentrate to half, add alkali to make it alkaline, extract with ether, dry, and evaporate the ether to obtain the finished product.

3. Tobacco: OR, 18.

Purpose

1. Used as dye intermediates and in organic synthesis.

2. Used as an intermediate for the pesticide pendimethalin and an intermediate for pharmaceutical vitamin B2.